Reviews Suspension Bushing

OTC 4244 Freightliner Rear Suspension Bushing Tool

  • OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock

ALN Suspension 4 Front Lower Control Arm Bushing Pontiac Torrent 02-09

  • ALN Suspension 4 Front Lower Control Arm Bushing Pontiac Torrent 02-09.
  • PREMIUM QUALITY UNDER IATF16949 OE STANDARDS. ALN SUSPENSION HAS MORE THAN 25 YEARS EXPERIENCE IN MANUFACTURING SUSPENSION PARTS..
  • 3-5 DAYS DEPENDS ON YOUR LOCATION AND ADDRESS. (See product detail).
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

OTC Tools 4247 Hendrickson Suspension Bushing Master Tool Kit

  • Reduces service time to remove and install HD rear suspension bushings substantially.
  • Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
  • Tool mounts to suspension for less weight to hold.
  • Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
  • Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.
Check Stock

Long and Short Polyurethane Bushing Replacement for Polaris Sportsman 335 400 400L 450 500 570 800 1996-2018 Replace # 5436973 5439270 - Control Arm Bushing Kit

  • 【FIT THE FOLLOWING MODELS】-- Compatible with 1998-2000 Polaris Sportsman 335 | 1996-2014 Polaris Sportsman 400 | 2006-2018 Polaris Sportsman 450 | 1996-2013 Polaris Sportsman 500 | 2014-2018 Polaris Sportsman 570 | 2005-2014 Polaris Sportsman 800..
  • 【HARD CONTROL BUSHING】-- With construction of heavy duty material, it can withdraw a lot of press without bending..
  • 【POWERFUL FUNCTION】-- The control bushing mainly mounts on car suspension and steering joints to absorb road bumps, control the amount of movement in the joints and reduce noise and vibration；While it is NOT a genuine a arm bushing part, it is an ideal replacement designed to fit or work like the factory part..
  • 【QUALITY ASSURANCE】-- Our bushings are high quality polyurethane bushings. This material is stronger than original ones. And it also lasts longer than the ones made of rubber. Thus, it is not easy to get broken or bent and you can use it for a long time to save your pocket money..
  • 【BUY WITH CONFIDENCE】-- Order from Skyee-blue for a true worry-free shopping experience. The bushing comes with one year warranty. If the a arm bushing ever fails on your Polaris, just feel free to contact us for a replacement..
Check Stock

Tiger Tool Pin and Bushing Starter Kit Without Hydraulic Cylinder for Commercial Trucks, for use with Class 6-8 Transportation Trucks and Equipment, 15099

  • This Starter Kit allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings - all while the suspension remains on the vehicle. Please Note: The 15099 does not include any necessary Adapters required to operate, all adapters are sold separately..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • There is no need to handle or remove heavy suspension assemblies. The removal of the spring packs from the axle is no longer required and this kit has 20 tons of pulling power for efficient pin removal and installation..
  • The 15099 Pin & Bushing Starter Kit, with one or more adapters, eliminates time-consuming, labor-intensive and costly processes.
  • technicians are no longer required to remove the suspension, haul it to the shop press or reassemble it to the vehicle. This system reduces shop time by as much as 70%! With more than 20 different adapter kits to choose from, and new ones being developed all the time, there sim....
Check Stock

Car Shifter Bushing, Car 6 Speed Manual Transmission Shifter Bushing Front Rear Shifter Linkage Stabilizer Bushings Replacement for Subaru Impreza WRX STI 2004‑2020 Shifter head/shift accessories

  • Function: The shifter linkage bushing will help eliminate shift ramps, maintain more consistent shifts and quickly get into gears for better operation..
  • Fitment: The front and rear shifter bushing kit is a replacement for Subaru Impreza WRX STI 2004‑2020, with 6 speed manual transmissions only..
  • Feature: The bushing kit could improve shifter precision and feel during gear changes, significantly reducing chances of sloppy or missed shifts..
  • Material: Made of PU and metal material which could better improve suspension, drivability, and supports better overall handling and performance of your car..
  • Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability..
Check Stock

Mountain Bike Rear Shock Absorber Bicycle Rear Biliary Spring Shock,Coil Spring Black，125mm (4.9\) 165mm(6.3\) 190(7.5\) 850/1000/1350Lbs (Eye-to-Eye 165mm Spring Rates 750Lbs)

  • Application:Rear suspension shock absorber, suitable for most mountain bikes with the same installation size.The suspension provides a smoother rid.
  • OCCASION：This coil shock pack includes many features found on higher end shock absorbers. This rear shock absorber is a perfect enhancement to mountain bikes, electric bikes, mobility scooter and other bicycle..
  • PRODUCT SPECIFICATION：High-quality finished surface: CNC alloy material, dark hard-anodized, Coil spring. Bushings: Top bushing size is 8mm x 24mm.
  • AVAILABLE SIZE：Available Size Eye to Eye x Travel and Spring rates: 190mm × 50 mm ( 7.48 × 1.97 inch) 1000Lbs、190mm × 50 mm ( 7.48 × 1.97 inch) 1350Lbs、160mm × 50 mm ( 6.30 × 1.97 inch) 1350Lbs、160mm × 50 mm ( 6.30 × 1.97 inch) 1000Lbs、125mm × 50 mm ( 4.92 × 1.97 inch) 850Lbs.
  • Note：Please measure the size of your shock for matching before buying.
Check Stock

Roykaw Rear Leaf Spring Bushing & Sleeves Kits for Club Car DS Golf Cart 1981-up & EZGO TXT/Medalist 1994-up

  • High quality long lasting rubber. Package includes 6 sleeves and 12 bushings..
  • Complete set of leaf spring bushings (Both front and Rear Leaf Springs) and Upper suspension shackle bushings and sleeves..
  • Fits Club car DS 1981-up & EZGO TXT 1994-up. Both electric and gas models..
  • Fits EZGO TXT 1994-up gas and electric, Reference OEM Sleeve Part No#: 70289G02.
  • Fits Club Car DS 1992-up gas and electric, Reference OEM Sleeve Part No#: 1012303.
Check Stock

BST BSSP Replacement for 2005-2016 Ford F250 F350 4X4 Adjustable Track Bar 0-8" Lift Kits for 05-16 f-250 f-350 4WD Front Adj Forged Track Bar

  • Fitment:for 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 Ford F250 F350 Super Duty 4X4 4WD.
  • Feature:Solid Forged Steel Adjustable Front Track Bar for 0-8" Of Lift.
  • BST BSSP track bar is adjustable after installation and comes with maintenance free thermofuse bushing.
Check Stock