Reviews Step down Module

DEVMO DP20V2A Constant Voltage Constant Current Programmable Control Step-Down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one..
  • Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A..
  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extrac.
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage wi....
Check Stock

UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module

  • 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
  • Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
  • Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
  • The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
  • Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.
Check Stock

DC 4.5-30V 10Amp Blinking Flasher Module

  • This is a simple and practical blinking flasher module, the ON and the OFF duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, DC light bulbs, etc .....
  • Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp. Maximum load 300 Watts/at DC 30V, 120 Watts/at DC 12V. (NOTE: this product no step-up, step-down or inverter function, only for DC load).
  • Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable. The output ON - OFF - ON – OFF… cycle alternates..
  • Two precise 25-turn adjustable potentiometers, you can use a screwdriver to easily adjust the ON and OFF time you need. With LED indication for output status..
  • Compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

FINDAUTO 1331402 Replacement Engine Cooling Fan Control Module Fits 2011-2016 V-olvo S60 2007-2015 V-olvo S80 2008-2010 V-olvo V70 2010-2013 V-olvo XC60 2008-2013 V-olvo XC70

  • TOP QUALITY - All Cooling Fans Module are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit..
  • EASY TO INSTALL - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Removing the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was removed..
  • FUNCTION - Engine Cooling Fan Control Module are critical to the function of most vehicles today, with several applications of these fans driven by an Engine Cooling Fan Module. These modules precisely operate fan speed to minimize a vehicleâ€s energy loss and maximize its fuel economy. Our OE Performance parts ensure an exact fit to drive your vehicleâ€s performance..
  • WHAT YOU WILL GET - 1PC high quality electric Cooling Fans Module as the Picture show..
  • NOTE - Before you make the order, Please make sure your car using this type S-tandard connector..
Check Stock

cciyu Engine Cooling Fan Control Module Fit for 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice

  • ❥FIT VEHICLES - 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice 2007-2010 for Saturn Sky.
  • ❥FEATURES OF COOLING FAN CONTROL MODULE - When the vehicle speed of the vehicle is greater than 0 KPH and the power take off unit is engaged, the fan control module raises a setpoint of the engine coolant temperature to reduce the fan speed demand processed from the engine coolant temperature, the power take off status information, and the vehicle speed..
  • ❥EASY INSTALLATION - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Retaking off the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was toke off..
  • ❥PAKCAGE INCLUDING - We offer 1 piece of well performance Engine Cooling Fan Control Module and buy with confidence..
  • ❥NOTE - Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock

TUPARTS Engine Cooling Fan Control Relay Module Fits for 2011-2016 Volvo S60 2007-2015 Volvo S80 2008-2010 Volvo V70 2010-2013 Volvo XC60 2008-2013 Volvo XC70

  • FIT VEHICLES – Engine Cooling Fan Control Relay Module for 2011-2016 Volvo S60 2007-2015 Volvo S80 2008-2010 Volvo V70 2010-2013 Volvo XC60 2008-2013 Volvo XC70.
  • Interchange Part Number – 1331402 13752 12 1437591 1488905 1671530 940004101.
  • NOTICE-To confirm that this part fits your vehicle,please enter your vehicles Year, Make, Model in the Compatibility Table(on the top of the page)before purchasing.
  • HOW TO WORK – The water and antifreeze mixture (engine coolant) in the radiator is normally cooled by air forced through the radiator as you drive the vehicle. When the vehicle is not moving, air is not flowing through the radiator, so a cooling fan is used to draw air through the radiator, thus removing heat from the engine.
  • EASY INSTALLATION – Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Removing the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was removed..
Check Stock

Diymore 2pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module 20v to 12v Step Down

  • This step-down voltage module with a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current..
  • It is designed with 75V/80A large current dual MOS tube. Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output..
  • The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. Wiring is convenient with these large current 30A screw terminals..
  • The buck module has 2 heat sink that could enhance heat dissipation, extending service life..
  • When there is a big difference between input and output voltage, please decrease power and current..
Check Stock

Low Noise Water Pump, Waterproof Plug and Play Water Pump with Motor, 370 Water Cooling Pump, Durable for RC Boat RC Aircraft Carriers DIY RC Boat RC Warships

  • The power supply method is not to take power from the receiver, battery used is greater than 2S and the voltage is between 7‑28V, need to use a step‑down module to make the operation more stable..
  • Suitable for installation on remote control boats that require water cooling with water‑cooled motors and without water‑absorbing steering gear.
  • Put it to work normally, the temperature will be hot, but it belongs to the normal range and will not affect the use..
  • Under the condition of 5V voltage, the pump works continuously for 15 hours and pumps water continuously..
  • It is waterproof and works well in water, JR plug suitable for plug into the receiver, plug and play..
Check Stock

3Dstereo ViewMaster Space Exploration - 3 Reel Set - (New)

  • Apollo Moon Missions & Kennedy Space Center - Classic Viewmaster - 3 Reels - 21 3D Pictures.
  • Reel A - Apollo 8 Mission Saturn V was launch vehicle for Apollo Missions.
  • Apollo 8 Crew were first men to orbit the moon.
  • Crew were first men to see the far side of the moon.
  • Splash down as Apollo capsule is recovered..
  • Reel B - John F. Kennedy Space Center Space Shuttle Model.
  • Apollo launch recreated in simulated firing room..
  • Reel C - Apollo 11 Mission July 20, 1969 - the Eagle has landed.
  • Armstrong’s historic photo of Aldrin’s first step on the moon.
  • Aldrin stands beside the US flag on moon.
  • Lunar Module Eagle returns to rendezvous with Columbia.
  • Command Module awaits return of first men on the moon.
  • Armstrong: That’s one small step for a man, one giant leap for mankind..
  • You will need a ViewFinder viewer to see the 3D images - available here on Amazon.
Check Stock

ATNSINC 4Pack LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module

  • The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.).
  • The output voltage: DC 1.5 - 35 V adjustable..
  • The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required)..
  • Steps: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage..
  • Package includes:4XLM2596 DC-DC buck converter module（Note：The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.
Check Stock

AOICRIE 3Pcs DC to DC Voltage Regulator Step Down Power Supply Buck Converter Module 6-40V to 5V 3A Dual USB Port Output

  • DC-DC 9V/12V/24V/36V to 5V 3A step down power converter module..
  • Converting Efficiency: 92% (MAX), Switching frequency: 150KHZ, Input: 6V-40V, Output: 5V / 3A (MAX)..
  • This module has short circuit protection, Working temperature: -40 to +85 degree Centigrade..
  • Load capacity: Maximum output 3A (with two phones simultaneously) Conversion efficiency: 92%..
  • On-baord Dual USB port with 5V 3A fixed output,can be used as a USB charger for your power bank,smart phones,tablet,etc.DIY Mobile Power Supply,5V output for charging Phone,MP3, MP4, etc..
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock