Reviews Steel Shaft

WEISHUJI Universal Stainless Steel Centre Drive Shaft, Stainless Steel Centre Drive Shaft, Stainless Steel Drive Shaft 140-250mm for Tamiya RC4WD D90 SCX10 SCX0016 Off-Road RC Crawlers Car

  • Universal Stainless Steel Centre Drive Shaft is compatible with HSP 94180 RC 1:10 racing climbing rock crawler, Stainless Steel Drive Shaft is also compatible with Axial SCX10 Electric 4WD RC Car..
  • Universal Stainless Steel Centre Drive Shaft length range is 140mm-250mm, Stainless Steel Centre Drive Shaft Hole Size is approx 5mm/0.20inch..
  • Universal Stainless Steel Centre Drive Shaft General Diameter is approx 12mm/0.47inch..
  • Universal Stainless Steel Centre Drive Shaft Axle Body Diameter is approx 10mm/0.39inch..
  • Package of Universal Stainless Steel Centre Drive Shaft includes: 1 x Stainless Steel Centre Drive Shaft.
Check Stock

XIAOSHI 2-Sets 8mm 100mm Case Hardened Plated Steel for Linear Motion Rods Shafts Guides

  • Linear Motion Shaft: /Diameter: 8mm /Length: 100mm /Material: Stainless Steel /Hardness: Surface hardness-55-60HRC.
  • Hardened layer-0.8mm /Surface treatment: Chrome Plated,Smoothness Ra0.8.
  • Horizontal Shaft Holder: /Material: Aluminum Alloy /Compatible Model: SHF 8A /Shaft Diameter: 8mm /Locking Bolt: M4 /Clamping Bolt: M5 /Dimensions: 43*10*5mm (W*L*T).
  • Linear Slide: /Material: Bearing steel /Slide Bush Method: LM8UU /Dynamic Basic Loading: 274CN /Static Basic Loading： 392CON /Dimensions: 34*30*22mm (W*L*F).
  • This linear motion shaft of 8 mm in diameter and in different Length is steel plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications..
  • Package Included: /2 x Linear Motion Shaft /4x Horizontal Shaft Holder /4x Linear Slide.
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (6.1mm)

  • EASY TO USE: Pattern edge of shaft lock collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • REUSABLE: Shaft lock ring has carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • CONVENIENT: Shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • DURABLE: Lock shaft collar adopts appearance plating process, no rust, no scratch, with good performance and long service life..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs..
Check Stock

VGEBY Bicycle Pedals 2pcs Mountain Bike Pedals Non‑Slip Aluminum Alloy Bicycle Platform Flat Pedals

  • Lightweight and durability -- CNC aluminum alloy body, strong and durability. Integrated cutting process, lighter weight, and integrated cutting is not easy to break..
  • With 5 anti‑skid nails -- Stainless steel anti‑skid nails grab the feet and have 5 anti‑skid nails on each side to strengthen the grip and make riding easier..
  • Professional design -- 14mm universal threaded port, chromium‑molybdenum steel shaft universal interface, easy to install, the shaft is firm and not easy to loosen..
  • Waterproof and dustproof -- The sealed shaft sleeve is waterproof and dustproof, anodized, it is not easy to rust, and it is not afraid of daily wind and rain..
  • Good performance -- Chrome‑molybdenum steel shaft, built‑in nylon DU shaft sleeve, high‑speed bearing, saving effort during riding..
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • ... greatly enhances the load bearing and transmission capacity of the robot parts..
  • Can also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the parts is more even, and the friction and the efficiency of transmission or driving force are greatly increased..
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

Bettomshin Drive Shaft w Propeller and Universal Joint for RC Boat, L200mm Shaft, L150mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • 【Parameters】- Shaft length: 20cm/7.8".
  • Suit for motor shaft diameter: 3.17mm/0.12".
  • 【High Quality】- RC boat propeller shaft kit is made of stainless steel,corrosion-resistant,wear-resistant and good sealing..
  • 【Feature】- There is bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in whirl..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat toy ,RC submarine and so on..
Check Stock

VGEBY Bicycle Pedals 2pcs Mountain Bike Pedals Lightweight Non‑Slip Sealed Bearing Bicycle Platform Flat Pedals

  • Lightweight and durability -- CNC aluminum alloy body, strong and durability. Integrated cutting process, lighter weight, and integrated cutting is not easy to break..
  • With 5 anti‑skid nails -- Stainless steel anti‑skid nails grab the feet and have 5 anti‑skid nails on each side to strengthen the grip and make riding easier.Chrome‑molybdenum steel shaft, built‑in nylon DU shaft sleeve, high‑speed bearing, saving effort during riding..
  • Easy to install -- 14mm universal threaded port, chromium‑molybdenum steel shaft universal interface, easy to install, the shaft is firm and not easy to loosen..
  • Waterproof and dustproof -- Sealed shaft sleeve is waterproof and dustproof, anodized, it is not easy to rust, and it is not afraid of daily wind and rain..
  • Satisfaction Guarantee -- If you are not satisfied with our product received, you can apply for unconditional return within 180 days..
Check Stock

uxcell K10 Tungsten Steel Lathe Round Rod Solid Shaft Bar 2mm Dia 100mm Length

  • The surface is smooth, easy to shape, no cracks formed..
  • K10 Tungsten Steel, strong rust-resistant and corrosion-resistant, sturdy and durable..
  • Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model..
Check Stock

VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter

  • Sturdy and Durable: This PTO shaft is a well-forged series4 driveline shaft with CE certification. It consists of a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery..
  • 6 Spline ＆ Round Ends: Constructed with a 6-spline tractor end and a round implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before..
  • Adjustable Length: Compressed Length: 43″ / 1100 mm.
  • Extended Overall Length: 61″ / 1550 mm. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
  • Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
Check Stock

BTSHUB 13Pcs Slide Hammer Dent Puller Tool 10lbs for Auto Body Truck Repair

  • Heavy duty drop-forged carbon steel construction, tempered and treated with oxide to resist rust and corrosion for added durability.
  • Solid steel shaft with knurled handle for sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with knurled handle for sure grip and a long shaft allows a more powerful pulling force.
  • The dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • Versatile puller assortment lets you handle all kinds of pounding and pulling operations..
  • Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist.
Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock