Reviews Steel Gas Cylinder

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

  • 【HIGH QUALITY】Durable,and the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards..
  • 【WITH COMPLETE REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
  • 【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
  • 【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a b....
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

10 CF Acetylene MC and 20 CF Oxygen Cylinder Set

  • 10 cu ft Steel Acetylene Cylinder Size MC CGA520 Valve Installed.
  • 20 cu ft Steel Oxygen Cylinder CGA200 Valve Installed.
  • Professional Safety and Performance Features.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

18' to 28' Long Adjustable Gas Lift Cylinder Tube for Bar Stool Drafting Chair Replacement Parts,Heavy Duty Hydraulic Pneumatic Cylinder Shock Piston

  • Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs..
  • Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches..
  • Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years..
  • Chair replacement parts: Suitable for bar stool ,drafting chair,high stool,smooth rise and fall, and supports 360 degrees of rotation..
  • Easy to Install: Usually you will need to use a hammer to remove the old gas lift cylinder from the chair base and replace it with a new one. (We recommend that you search for "gas lift replacement" on YouTube).
Check Stock

New 60 cu ft Aluminum Argon Cylinder with CGA580 Valve

  • New, high-quality 20 cf steel helium cylinder with CGA580 valve.
  • 5.24" diameter and 14.76" height (Cylinder).
  • Heavy-duty brass constructed helium balloon inflation valve.
  • Inflation valve complete with regulator and gauge.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

BLUEFIRE Trigger Start Gas Welding Torch Head with Propane Kit,Extend 1.5" Tube Piezo Self Ignition Nozzle Fuel by MAPP MAP PRO Propane 1lb Handheld Cylinder Soldering Brazing Triple-Point Flame

  • Complete Kit sell with BLUEFIRE 14.1 oz Standard Propane Gas Cylinder, >93% Purity! Ready-to-Work Kit..
  • Caution: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Trigger Start Ignition for instant 1-click flame light up, updated version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO, threading fits CGA600 US standard 1lb fuel gas cylinder.
  • Strong and Stable Triple-point Flame Structure for precision soldering/brazing. Adjustable flame knob for control flame size, solid brass valve constructed for durability.
  • Suitable for Soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts..
Check Stock

New 60 cu ft Steel Oxygen Cylinder with CGA540 Valve

  • New, high-quality 60 cu ft steel oxygen cylinder with CGA540 valve.
  • Thick walled steel tank, with the durability to stand up to any work site.
  • 7″ diameter x 22.5″ in height with valve - approximately.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

Clinical Care Geri Chair Recliner, Rosewood

  • Ideal for use in dialysis, blood collection, respiratory and cardiac care.
  • Chair can be positioned in 4 positions - upright, TV, Full Recline, and Trendelenburg.
  • Gas cylinder controls deep recline and Trendelenburg position.
  • Gas cylinder release handle for quick back release.
  • Handle can be operated from either side of the recliner.
  • Wide, upholstered, armrests are angled to provide comfort and support in any reclined position.
  • Foam and vinyl meet California Flammability Standard and Boston Fire Department specifications.
  • Neutral-colored, sturdy, steel frame is easy to maintain.
  • 5" Casters (2 with locks) make it easy to move and secure recliner.
Check Stock

Sadlak Industries M14 Aluminum Scope Mount

  • The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as....
  • Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color..
  • Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from....
  • Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak....
Check Stock