Reviews Gas Cylinder Cylinder Tube

Wall-Mounted Bracket Single Wall Bracket for Compressed Gas Cylinders Holder (Red)

  • gas tank holder made of ABS plastic，solid construction offers safe & secure use.
  • gas cylinder rack simple design is easy to install, cylinder tank brackets suitable for hospital/laboratory/factory etc.
  • cylinder strap secures cylinder to bracket，prevent cylinders from falling or moving.
  • compressed gas tank fixed frame holder suitable for 40L cylinder gas tank.
  • gas cylinder strap long100cm/39.37inch；steel cylinder stand Approximate size.
Check Stock

18' to 28' Long Adjustable Gas Lift Cylinder Tube for Bar Stool Drafting Chair Replacement Parts,Heavy Duty Hydraulic Pneumatic Cylinder Shock Piston

  • Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs..
  • Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches..
  • Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years..
  • Chair replacement parts: Suitable for bar stool ,drafting chair,high stool,smooth rise and fall, and supports 360 degrees of rotation..
  • Easy to Install: Usually you will need to use a hammer to remove the old gas lift cylinder from the chair base and replace it with a new one. (We recommend that you search for "gas lift replacement" on YouTube).
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

  • 【HIGH QUALITY】Durable,and the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards..
  • 【WITH COMPLETE REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
  • 【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
  • 【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a b....
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

20 lb CO2 Tank New Aluminum CGA320 with SIPHON TUBE by Beverage Elements

  • 20 Lb. Co2 Aluminum Cylinder With CGA 320 Valve, Carry Handle, And Dip Tube.
  • (We also carry a complete line of compressed gas cylinders valves and parts).
  • 8.0 inch diameter, 28.2 inch length, 1.125″ UNF inlet thread..
  • Cylinder with valve, Shipped Empty,Do Not tilt it or lay it on its side..
Check Stock

Office Owl Office Chair Cylinder Replacement Super Bundle (Includes Removal Tool, Gloves an Instructions) Universal Size Heavy Duty Gas Cylinder for Office Chairs. Pneumatic Piston/Hydraulic Piston

  • ✅WHAT’S INSIDE YOUR OFFICE CHAIR CYLINDER SUPER BUNDLE? ! We included literally EVERYTHING you need to replace your office chair gas cylinder easily, quickly and painlessly! Featuring: Printed STEP BY STEP INSTRUCTIONS, premium GLOVES for gripping the cylinder and keeping your hands grease free, and a REMOVAL TOOL for effortless removal of the old cylinder. We included everything you need to revive your ageing office chair!.
  • ✅BREATHE NEW LIFE INTO YOUR OLD CHAIR : If your office chair starts sinking, SAVE MONEY by purchasing our office chair cylinder instead of spending money on a brand new chair! This purchase makes total sense, and comes with everything you need for a painless replacement! Backed by our money back guarantee, there is no reason NOT to make this purchase!.
  • ✅UNIVERSAL SIZE GAS LIFT: Our office chair cylinder replacement will fit just about any office chair including popular brands such as Herman Miller, Hon and Amazon Basics! If for some odd reason it doesn’t fit your specific office chair, return it for a no questions asked refund and we will even pay for the return shipping. You have nothing to lose!.
  • ✅SUPER HEAVY DUTY CLASS 4 CYLINDER! Our pneumatic piston replacement cylinder is class 4 – the highest qu....
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

Sadlak Industries M14 Aluminum Scope Mount

  • The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as....
  • Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color..
  • Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from....
  • Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak....
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock