Reviews Steel Cut off Tools

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ... cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 42,000 RPM. and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...lass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting whee....
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...lass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting whee....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...lass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting whee....
Check Stock

Cutting Discs for Rotary Tool Diamond Metal Wood Cutting Wheels HSS Circular Saw Blades 6pcs with 1/8 Shank Resin Cutting Discs 20pcs 545 Diamond Cutting Wheels 10psc

  • ★ 10 pcs RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging....
  • ★ 6 pcs HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 6 kinds of outer diameters 22/25/32/35/44/50mm and the....
  • ★ 10 pcs DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable....
  • ★ GREAT TOOL FOR DIY – These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to....
  • ★ ★ QUALITY WARRENTY – We provides 3 months quality guarantee and lifetime after-sale service for every customer. We believe in our cutting....
Check Stock

21.5 Inches Clay Cutters Wire Luxiv Cut Off Tools for Clay Artists with Black Hand Pottery Wheel Tools Pottery Cut Off Tools 1

  • 【High-Quality Material】: Clay cutters wire are made of high-quality stainless steel wire braided, sharp and firm, not easy to fracture, durable..
  • 【Reasonable Size】: Cut off tools for clay artists full length is 21.5in // 50cm, the wire length is 15.7in // 40cm, size suit for pottery, clay....
  • 【Comfortable Handle】: Pottery wheel tools have two black handles, is made of soft rubber, comfortable for use, free your hands from traditional....
  • 【Safe and Efficient】: Pottery cut-off tools sharp for cutting clay, quick and smooth, but safe for your hands, more convenient and safer than....
  • 【Easy to Use】: Clay cutters wire double hands operation, easy to use, save your time and energy..
Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

  • 32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
  • Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
  • Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
  • Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.
Check Stock

YON.SOU. Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels, Pneumatic Metal Sheet Cutting Tool, Heavy Duty Air Cutter Cutoff Tool

  • ...tools, the air cutoff tool by YON.SOU. gets your job done more quickly..
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360 degrees, the wheel guard is made of chrome plated alloy steel which prevents sparks flying to your face. The air cut off tool is also equipped with safety switch for maximum safety which could prevent accidental start-up..
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or replace cut-off wheel. The pneumatic cutter is made of aluminum housing which is lightweight and durable for you to precisely control the air cutter tool..
  • ⚙️ VARIOUS APPLICATIONS: The high speed pneumatic cutoff tool is designed to cut through sheet metal, plastic pipes, composite material, exhaust systems, straps, hangers, tiles, etc. The metal cutter air tool is suitable for you to use in your DIY project or auto shop..
Check Stock

3Pack 4.5" Diamond Metal Cutting Cut Off Wheels for 5000+ Cuts on Rebar, Steel, Iron and INOX, Angle Grinder Diamond Disc with 7/8" Arbor

  • DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
  • EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
  • SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
  • COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 7/8" (22.22 mm) Arbor, and any other tools with a 7/8" arbor..
  • INCLUDE: 3 Pack 4.5-inch(115mm) diamond cut-off wheels set with a 7/8" ( 22.22 mm) Arbor, MAX RPM 13200..
Check Stock

3Pack Diamond Cut Off Wheels 3 Inch 75MM Metal Cutting Wheel with 3/8 Inch 9.5MM Arbor Diamond Disc with 5000+ Cuts on Rebar Steel Iron and INOX

  • DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
  • EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
  • SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
  • COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 3/8" (9.5 mm) Arbor, and any other tools with a 3/8" (9.5 mm) Arbor..
  • INCLUDE: 3 Pack 3-inch(75mm) diamond cut-off wheels set with a 3/8" (9.5 mm) Arbor, MAX RPM 20300..
Check Stock

Drill America #44 Solid Carbide Drill Bit, DMOD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • ... developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 12 high-quality cutting wheels which are 1 1/2 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 45,0....
Check Stock