Reviews Cut Off Wheels 2

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...ll 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor.such as dewalt, makita, milwaukee, metab, bosch or any other 4.5 inch angle grinder.Cutting wheel thickness:1/25 inch(1.2mm).Up to 13,300 RPM (>common 13,000 RPM) rotating speed for maximum productivity..
  • 【Safety & Durable】Metal 4.5 cut off wheels are specifically manufactured from corundum and white alundum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubin....
Check Stock

Shark Industries PN-19 Die Grinder Cut-Off Wheels 2-Inch x 1/32” x 3/8” Shark Type-1 Double-Reinforced Thin Wheels 54 Grit Maximum RPM 30,000 10 Cutting Discs

  • Double Fiberglass Reinforced Cut-Off Wheel – Our cutting wheels have double the reinforcement of less expensive wheels that are made overseas, which....
  • 10-Pack of Wheels – When you purchase our 2-inch cutting wheels 10-pack, you’ll always have plenty of cut-off wheels to finish the job and start....
  • High-Speed Steel Cutter – With a maximum spin speed of 30,000 revolutions per minute, our wheel is made to precisely cut high-tensile materials like....
  • Made in USA Cut-off Wheels – Count on the materials and quality we use in the manufacturing of these USA-made cut-off wheels.
  • Carbon Arrows – Great for cutting custom carbon arrows, for a smooth finish.
Check Stock

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....
Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

  • Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
  • The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
  • Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
  • Get clean burr-free cuts every time with our 3 inch cut off wheel.
  • Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
  • Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
  • Durable Materials: Get strength from our cutting wheels for metal.
  • These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
  • Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
  • Cutting discs feature 3/8” arbor holes.
  • Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
  • Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

BOSCH TOOL - SKIL EZ406-02 Starter Kit, 1-1/2"

  • EZ lock cut-off wheels last 2 times longer.
  • Cut-off wheels labeled for quick identification.
  • Package dimensions:1.75"L x 5.1"W x 5.15"H.
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

Dremel EZ406-02, EZ - Lock Starter Kit, 1 1/2-Inch (38.1 mm) Wheel Diameter, 5 piece Fiberglass Reinforced Cut-off Wheels and EZ402 mandrel included, Rotary Tool Cutting Disc Accessories

  • Cut-off Wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel..
  • Ideal for easily cutting or slotting bolts, screws or sheet metal, thin wood, ceramic and plastic..
  • Dremel EZ406-02 includes one EZ402 EZ - Lock mandrel and five EZ456 Fiberglass reinforced cut-off wheels..
  • The EZ456 Cut-off wheels last 2X longer than current fiberglass-reinforced cut-off discs..
  • Working diameter: 1-1/2" (38.1 mm), Blade Thickness: .045” (1.1mm), Blade Material: Fiberglas.
  • For use with Dremel EZ402 mandrel only. The Dremel The EZ-Lock is the first patented system of its kind, eliminating the need for a screw and a screwdriver.
  • Dremel accessories are also color-coded into usage categories, to find more Cutting accessories look the Red color code..
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Diamond Cutting Wheels + Burs For Dremel Rotary Tool Glass Stone Tile Cutter 545 Cut Off Disc Masonry Ceramic Concrete Notching Die Grinder Bits 35pc + 6 Mandrels

  • Turn your Dremel rotary tool into a powerful cutting machine with the 11-piece EZ Lock Cutting Kit. Compatible with all Dremel Rotary Tools..
  • SMOOTH CUTS: The cut-off wheels included in the kit have been specially curated to perform all cutting applications, ideal for cutting in either metals or plastics..
  • QUICK ACCESSORY CHANGE: Variety of EZ Lock cutting wheels. The patented Dremel EZ Lock system makes accessory changes 6X faster than using a standard mandrel..
  • COMPACT CASE: Accessory set includes a reusable storage case for easy organization of the included bits..
  • KIT CONTENTS: EZ409 1-1/2" EZ Lock Cut-Off Wheel (x3), EZ456 1-1/2" EZ Lock Cut-Off Wheel (x4), EZ476 1-1/2" EZ Lock Cut-Off Wheel (x3), EZ402 - EZ Lock Mandrel (x1).
  • USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Dremel EZ688-01 EZ Lock Rotary Tool Cutting Discs Accessory Kit- Cut-Off Wheels – Plastic, Metal, and Thin Cuts, 11 piece,As the picture shown,Medium

  • The 11-piece set includes 100% Dremel EZ Lock accessories ideal for cutting including soft & hard metals, wood, plastic, ceramic, drywall and more..
  • Kit includes the patented EZ Lock accessory system allowing for quick and easy accessory changes. EZ Lock makes accessory changes 6X faster than using a standard mandrel..
  • Cutting accessory kit features the EZ456 Metal Cut Off Wheels reinforced to last 2X longer than current fiberglass-reinforced wheels..
  • Includes a reusable storage bins for easy organization of the included cut-off wheels..
  • Cutting accessories: EZ476 1-1/2" Plastic Cutting Wheel (x3), EZ409 1-1/2" Thin-Cut, Cutting Wheel (x3), EZ456 Metal 1-1/2" Cutting Wheel (x4).
  • US-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

Ingersoll Rand 426 3” Reversible Cut off Tool, Lightweight with Speed Regulator Knob, Use with Ingersoll Rand 9520 and 9521 Cut-Off Wheels, 5 Cut-Off Wheels Included

  • A CUT ABOVE: The IR 426 3 Inch Reversible Cut-off Tool is a controllable, lightweight, and reversible tool designed for cutting mufflers, sheet metal, tail pipes, nuts, and bolts.
  • USE WITH: The 426 pneumatic Cut Off Tool is to be used with our 5 pack and 50 pack of cut-off wheels.
  • Part Numbers: 9520 (5 pack) and 9521 (50 pack).
  • LIGHTWEIGHT COMFORT: The air powered tool weighs only 2 lbs, so you don’t tire and can get the job done faster.
  • VERSATILITY: With the speed regulator knob you can control the tool’s speed and easily change it for different applications.
  • RELIABILITY: Every component, mechanism, and function has undergone rigorous testing to ensure the tool's long-lasting performance and dependability.
Check Stock

Rotary Thread RTM7 Mandrel - Essential for Die Grinder Accessories & Cut-Off Wheels, 3/8" Arbor Hole & 1/4" Stem, Ideal for Holding Die Grinder Bits - Durable Metalworking Tool (2 Pack)

  • ESSENTIAL TOOL: A high-quality and effective tool is a must-have for anyone who wants to work with metal efficiently and safely.
  • PRECISION CUTTING: Holds cut-off wheels securely in place, allowing for precise and with greater efficiency, reducing time and effort for cutting, grinding, sanding, cleaning, or polishing.
  • UNIVERSAL COMPATIBILITY: The die grinder cut off wheel mandrel fits most Type 1 cut-off wheels with a 1/4" arbor hole, making it versatile accessory for use with a wide range of cut-off wheels.
  • IMPROVED SAFETY: The shank and screw are made of A3 carbon steel. It ensures secure attachment of cut-off wheels and reduces the risk of accidents or injuries due to wheel slippage.
  • HIGH-QUALITY, DURABLE and LONG-LASTING: The cutting wheel mandrel is made of A3 carbon steel with black plating, which is corrosion resistant to provide long life.
Check Stock