Reviews Stainless Steel Mufflers

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

BRAND NEW FLOWMASTER OUTLAW CAT-BACK EXHAUST SYSTEM,3

  • Brand New Flowmaster Outlaw Cat-Back Exhaust System, 3" Stainless Steel Pipes, Dual Out Rear, Compatible with 2015-2017 Mustang GT 5.0L Coupe (Holley Part #817734).
  • Flowmaster Outlaw Cat-back exhaust system is perfect for the person looking for a deep & very aggressive sound level inside & outside the car. This bolt-on emissions-legal system features our exclusive dual 3" Scavenger Series X-pipe for maximum power & a deep unique sound..
  • The stainless steel X-pipe flows into a pair of our race proven Outlaw Series mufflers & exits into dual mandrel-bent 3" stainless steel tailpipes which are finished off with large 4" polished stainless steel tips. The system is designed for an easy fit & includes all necessary parts & hardware for an easy install..
  • Features: Includes our Exclusive Scavenger Series X-pipe | Very Aggressive Interior & Exterior Sound | Uses the Factory Hanger Locations | Dyno Tuned For Maximum Power | Race-proven Outlaw Mufflers | Stainless Steel Construction.
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic SS70 9" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Full 4-2 compatible with Yamaha FJR1300 Mini 8' Stainless Round Muffler Exhaust 01-05

  • Delkevic Mini 8″ stainless steel round mufflers are made from high grade 304 stainless steel polished to a mirror finish. This short muffler has a large slash cut outlet and is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Delkevic Full 4-2 compatible with Kawasaki Ninja 1000 & Z1000 SS70 9" Stainless Steel Oval Muffler Exhaust 11-20

  • Kawasaki Ninja 1000 (2011-2020) & Z1000 (2011-2016).
  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda CBR600 F4i (2001-2006) with SS70 9" Stainless Steel Oval Muffler

  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Full 4-2 Exhaust compatible with Honda Goldwing GL1100 SL10 14' Stainless Steel Round Muffler 80-83

  • Delkevic SL10 14″ stainless steel round mufflers are manufactured from high-grade 304 stainless steel. This muffler gives a decent amount of sound over stock but can be fairly quiet with in low RPM. This is a great pipe if you want some sound but not to be too loud..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda VFR800 V-Tec (2002-2009) with Mini 8" Stainless Steel Round Muffler

  • Delkevic Mini 8" stainless steel round mufflers are made from high grade 304 stainless steel polished to a mirror finish. This short muffler has a large slash cut outlet and is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with SL10 14" Stainless Steel Round Muffler

  • Delkevic SL10 14" stainless steel round mufflers are manufactured from high-grade 304 stainless steel. This muffler gives a decent amount of sound over stock but can be fairly quiet with in low RPM. This is a great pipe if you want some sound but not to be too loud..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda VFR800 V-Tec 9” Stainless Oval Muffler Exhaust 02-09

  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This pipe is loud and aggressive even with the baffle in. This muffler is great for short trips around town where you need to be heard..
  • This set includes all necessary hardware to mount the muffler onto a stock header. If gaskets are required for installation, they are provided..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock