Reviews Stainless Steel Bearing Bushing

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Okuma SLV 4/5 Spare Spool

  • Multi-disk cork and stainless steel drag washers.
  • Roller bearing allows the drag to Engage in one direction only.
  • Precision Machined brass bushing drive System.
Check Stock

OKUMA SLV-78b SLV Fly Reels 1RB, Multicolor, One Size

  • Precision Machined Brass Bushing Drive System.
  • Precision Machined Stainless Steel Spool Shaft.
  • Roller bearing allows the drag to engage in one direction only.
Check Stock

OKUMA SLV-45b SLV Fly Reels 1RB, Multi, One Size

  • Precision Machined Brass Bushing Drive System.
  • Precision Machined Stainless Steel Spool Shaft.
  • Roller bearing allows the drag to engage in one direction only.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Wilmad-LabGlass LG-9444-106 10mm PTFE Stirrer Bearing, Standard Taper 34/45

  • Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter, and top cap. See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals CNC Non-Slip Lightweight Aluminum Alloy Bicycle Pedals Sealed Bearings Bicycle Platform Pedals 9/16\ BMX Road Bike Pedal

  • ...trength aluminum alloy, You may enjoy the aggressive trail riding and some jumping with these mtb pedals. With carbon fiber bushing around spindle,makes the pedal more lightweight, durable and anti-corrosion, And the bushing keeps these flat pedal spin smooth without noise.
  • GREAT ANTI-SKID:The bike pedals featured 5 stainless steel spike screw, there is thread on the pins, which provide the powerful grip to your foot, makes your cycling safe. Meanwhile, the carving from the pedal’s surface increase the anti-slip ability. You will enjoy the efficient riding.
  • LUBRICATED BEARING:The road bicycle pedals are built in one sealed bearing and one DU bearing, Which keep these pedals are lubricated and stable, the bicycle platform will work smooth and durable, excellent for long distance riding. Additionally, the ending cap will keep bearing clean, and stay away from water and dust infiltrating.
  • WIDE BIKE PLATFORM:The bicycle pedals featured 98mm length and 90mm wide platform. Your foot will get the great support from the the wide platform, ease the pressure from the platform but keep your riding effectively . Only 151 g for each pedal,ultra lightweight.Withe the advanced big logo pattern,makes the pedal passionate and stylish.
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals CNC Non-Slip Lightweight Aluminum Alloy Bicycle Pedals Sealed Bearings Bicycle Platform Pedals 9/16\ BMX Road Bike Pedal

  • ...trength aluminum alloy, You may enjoy the aggressive trail riding and some jumping with these mtb pedals. With carbon fiber bushing around spindle,makes the pedal more lightweight, durable and anti-corrosion, And the bushing keeps these flat pedal spin smooth without noise.
  • GREAT ANTI-SKID:The bike pedals featured 5 stainless steel spike screw, there is thread on the pins, which provide the powerful grip to your foot, makes your cycling safe. Meanwhile, the carving from the pedal’s surface increase the anti-slip ability. You will enjoy the efficient riding.
  • LUBRICATED BEARING:The road bicycle pedals are built in one sealed bearing and one DU bearing, Which keep these pedals are lubricated and stable, the bicycle platform will work smooth and durable, excellent for long distance riding. Additionally, the ending cap will keep bearing clean, and stay away from water and dust infiltrating.
  • WIDE BIKE PLATFORM:The bicycle pedals featured 98mm length and 90mm wide platform. Your foot will get the great support from the the wide platform, ease the pressure from the platform but keep your riding effectively . Only 151 g for each pedal,ultra lightweight.Withe the advanced big logo pattern,makes the pedal passionate and stylish.
Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

  • 1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
  • Bushing dimensions: 11/16" diameter x 2-1/8" long.
  • Bolt dimensions: 1/2" diameter x 3" long.
Check Stock

Prime-Line GD 12234 Garage Door Torsion Spring, .250 inch x 2 inch x 32 inch, Green, Right Hand Wind

  • Torsion Springs Single Left 243 x 2" with Winding Rods Center Steel Bearing.
  • Includes spring left, steel bearing and winding bars.
  • Springs are made in the USA using Oil Tempered.
  • You will receive only ONE (1) bushing or bearing with a pair of springs.
Check Stock