Reviews Ss Pipe Weled

FULL Hotparts Turbo T4 Kit Vortec V8 LS 4.8 5.3 6.0 6.2 Silverado Sierra LSX 3"

  • 2" 304 SS heavy duty bellows | Turbo Installation Kit Included | Up-Pipe to Y-Pipe Gasket Included | Y-pipe to Turbo Clamp Included.
  • 3 Year unlimited mileage warranty | Polished Stainless Tubular Construction | Precision Built For Long-Lasting Performance.
  • Compatible with 2003-2007 6.0L Powerstroke Diesel.
Check Stock

SHYLIYU 1/2HP Stainless Steel 2\ OD Pipe Submersible Bore Pump 1/2 inch Outlet Water Pump 220-240V, 60Hz, Deep Well Pump Screw Submersible Water Pump for Industrial and Home Use

  • Outlet: 1/2 inch, OD Pipe: 2 inch, suitable for well diameters of 2.5 inches and above.
  • Pump Max. head: 55m/180ft ✍ NOTE: Please confirm whether the voltage and frequency compatible with your local standards before you order and NOTE: It is prohibited to use with no water.
  • ❤ Material: stainless steel 201 pump body, outlet is SS304, motor wire is 100% copper, oil motor, screw material is SS and rubber.
  • ❤ Application: with an external hose or pipe connection (top) thread, stainless steel body. Industrial grade heavy duty, also good for home usageIdeal for village, family, farm, camping car water supply, etc.
  • ❤ Perfect for household and utility applications of transferring water from one place to another, solved the water shortage problems of surface water.
  • ❤ One year warranty（Attention: Defects due to improper use of the pump are not within the warranty) and NOTE: It is prohibited to use with no water.
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Steel Straight Conversion Adapter Fittins 304 SS Pipe Fitting Tube DSJ-M,YDF-LOK,LOK, Ferrule Connector 1/8'' 1/4'' 3/8'' 1/2'',3/8'',8mm Tube

  • Stainless Steel Pipe and Fitting 304 SS Pipe Fitting Tube OD to NPT Thread.
  • Thread sizes : 01: OD 9.7MM G1/8'' 02: OD 12.7MM G1/4'' 03: OD 16MM G3/8'' 04: OD 20MM G1/2''.
Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

  • Parameter - 2.5”Exhaust pipe 90 degree elbow.
  • Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
  • Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
  • Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
  • Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
  • Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
  • Package List - You will get valued 4 pieces of 90 bend elbow pipes.
  • No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

  • 【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Motorized Ball Valve- Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid 1 inch

  • RELIABLE AND SAFE- The metal components of this ball valve are made entirely of SS304 and SS316 stainless steel.
  • NPT THREADING-1” thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the....
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

STAINLESS STEEL 1 CHECK VALVE for WATER WELL PUMP Pressure TANK FLOMATIC 4201SS2

  • 1" Danfoss Flomatic Stainless Steel Check Valve.
Check Stock

Walker Exhaust Mega-Clamp 33226 Exhaust Clamp

  • For long life, corrosion resistance and a sharp appearance, install the Walker Mega-Clamp.
Check Stock

45\ Aluminum Cam Bar Trailer Lock Assembly SS Mounting Hardware

  • 48" Auminum Trailer Cambar latch & hardware, Non polished finish.
  • Includes 4 - 5/16" x 2" carriage bolts & nylon nuts, washers.
  • SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts & camnuts.
  • Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
  • Hinge pin of corrosion resistant material to prevent binding.
Check Stock

Stainless 2' 90° Mandrel Bend Elbow - 1D Tight Radius - 16GA/.065' Wall - SS304 Stainless Steel Exhaust Bend Pipe Exhaust Piping for Car Exhaust Pipe Elbow Modified, Stair Handrail, etc - ATOTL

  • 【Material】: SS304 Stainless Steel Exhaust Pipe 90° Elbow Exhaust Piping.
  • 【Durable】: Not easily damaged, No rust, anti-oxidation, High temperature resistance.
  • 【Parameter】: OD: 2", Bend Degree: 90°, Wall Thickness: 16GA /.065", Back arc length: 4.9 inch, (can be welded to 2 inches outside diameter pipe).
Check Stock

Kay 36\ Aluminum Cam Bar Lock Assembly SS Hasp & mounting Hardware

  • 36" Auminum Trailer Cambar latch & hardware, Non polished finish.
  • 4 - 5/16" x 2" carriage bolts & nylon nuts, washers to fasten hinge to frame.
  • SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts.
  • Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
  • Hinge pin of corrosion resistant material to prevent binding.
Check Stock

STAINLESS STEEL 1 1/4 1.25 CHECK VALVE for WATER WELL PUMP Pressure TANK FLOMATIC 4202SS2

  • 1 1/4" (1.25") Danfoss Flomatic Stainless Steel Check Valve.
Check Stock