Reviews Spline Shaft

NEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TOPLOADER TRANSMISSIONS & STOCK C.

  • Brand New Ram Hydraulic Throwout Bearing Kit (Ram Part #78136)..
  • Works with Ford Toploader Transmissions that have a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" * Toploaders either have an 1 1/16"-10 spline or 1 3/8"-10 spline input shaft.
  • This bearing isn't big enough to work with the 1 3/8"-10 version. * In addition, some toploaders with an 1 1/16"-10 spline shaft have a larger retainer, so it's a good idea to measure the retainer collar to make sure it is 1.375" or less..
  • Includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

Musiclily Pro 6mm Steel Knurled Flat Top Barrel Knobs with Set Screw for Telecaster Electric Guitar or Precision Bass Chrome Set of 2

  • Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
  • Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
  • Height: 19mm (3/4 inch), outer diameter: 19mm (3/4 inch), inner hole diameter: 6mm (15/64 inch).
  • Made of quality steel, knurled flat top knobs, with set screw to secure the knob to the shaft. You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
  • Package includes: 2 pieces knobs and screwdriver.
Check Stock

Musiclily Pro 6mm Steel Abalone Top Telecaster Dome Knobs with Set Screw for Tele Electric Guitar or Precision Bass, Chrome (Set of 2)

  • Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
  • Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
  • Height: 18mm (45/64 inch), outer diameter: 18mm (45/64 inch), inner hole diameter: 6mm (15/64 inch).
  • Real Abalone top will dress up your instruments well.Made of quality steel , with set screw to secure the knob to the shaft.You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
  • Package includes: 2 pieces knobs and wrench.
Check Stock

Pioneer TAT-5304 Clutch Alignment Tool

  • 14 spline shaft, only used with 14 spline clutch discs.
  • Supports pressure plates & disc assemblies.
Check Stock

VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter

  • Sturdy and Durable: This PTO shaft is a well-forged series4 driveline shaft with CE certification. It consists of a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery..
  • 6 Spline ＆ Round Ends: Constructed with a 6-spline tractor end and a round implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before..
  • Adjustable Length: Compressed Length: 43″ / 1100 mm.
  • Extended Overall Length: 61″ / 1550 mm. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
  • Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
Check Stock

POWER PRODUCTS 3-Point Tiller Slip Clutch PTO Shaft for Rural King Country Way Rotary Tiller

  • Compressed Length: 32" ( With the Friction Clutch).
  • Extended Length: 40" ( With the Friction Clutch).
Check Stock

Metallor Electric Guitar Top Hat Knobs Speed Control Knobs 2 Volume 2 Tone Compatible with Les Paul LP Electric Guitar Parts Replacement (Black)

  • Fits for Les Paul style guitar and most similar guitars..
  • Almost all press-on knobs that fit coarse-knurled 18-spline pot shafts, won't fit fine-knurled 24-spline shafts..
  • Fits metric 6mm diameter pots, Height:12.7mm(0.55in).
  • Material: High quality plastic. Color: Black with silver top..
  • Package includes: 2 x Volume knobs, 2 x Tone knobs..
Check Stock

Metallor Electric Guitar Top Hat Knobs Speed Control Knobs 2 Volume 2 Tone Compatible with Les Paul LP Electric Guitar Parts Replacement Gold

  • Fits for Les Paul style guitar and most similar guitars..
  • Almost all press-on knobs that fit coarse-knurled 18-spline pot shafts, won't fit fine-knurled 24-spline shafts..
  • Fits metric 6mm diameter pots, Height:12.7mm(0.55in).
  • Material: High quality plastic. Color: Gold with silver top..
  • Package includes: 2 x Volume knobs, 2 x Tone knobs..
Check Stock

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair 2X - Includes Wiring Diagram

  • High Quality CTS Push Pull Pot - brass bushing and shaft.
  • Short Shaft (3/8" bushing height), 24-tooth fine spline shaft.
  • Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting.
  • Not intended for use with import guitars using metric components.
Check Stock

Togarhow 740mm 29 inch Go Kart Rear Axle Assembly Complete Wheel Hub Kit & 13 * 5-6 Wheel Tires With Rim & Brake Assembly & T8F Chain Suitable for DIY Go Kart Quad, Trike, Drift Bikes

  • 【Package Included】: 2* Wheels (with tire, rim, tube), 2* Pillow Block, 1* Axle Assembly, 1* T8F Chain, 1* Sprocket, 1* Brake Disc, 1* Brake Master Cylinder Caliper Assembly..
  • 【Shaft Size】: The Shaft overall length: 740 mm (29.13 inch), Spline to Spline: 452 mm (17.79 inch), the thickest part of the shaft is 22 mm(0.86 inch), Bearing Position: 20 mm(0.78 inch)..
  • 【Tubeless Wheel Size】:Diameter-13.0 inch , Width- 3.93 inch , come with 4.1-6 tire, 6" rim, and inner tube..
  • 【Wide Application and Durable】: These have almost all the rear-end parts necessary needed, Suitable for DIY rebuild drift bikes, go kart quad, or trikes..
  • 【Suitable】: fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space..
Check Stock

Power Steering Gear Box Gearbox For Ford F250 F350 F450 Super Duty & Excursion w/ 36 Spline Output - BuyAutoParts 82-00425AN New

  • Guaranteed Exact Fit for easy installation, backed by a three year, unlimited mileage warranty.
  • 100% BRAND NEW, premium ISO/TS 16949 quality - tested to meet or exceed OEM specifications.
  • Engineered for superior durability, backed by a three year, unlimited-mileage warranty.
  • This brand new gearbox will fit and function just like OEM, with the same steering ratio as well.
  • Fits all 2003 and 2004 Ford F-250 and F-350 Super Duty pickups, plus 2000-2002 models with a 36-spline output shaft.
  • that covers most 4WD models, while 2WD trucks have either a 32-spline or 36-spline output..
Check Stock

CTS TAOT Custom 500K SHORT Split Shaft Audio Taper Pots - Set of Four (4X) - 10% Tolerance – 450G

  • TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT.
  • Short Split Shaft (3/8" Height X 3/8" Diameter Bushing).
  • 24 Tooth Fine Spline .236" Diameter Shaft.
  • Audio Taper suitable for both Volume & Tone controls.
Check Stock

POLASTORM Aluminium Outboard Propeller for Suzuki/Tohatsu&Nissan/BRP Johnson DF90/100/115/140HP (14 Dia X17 Pitch) Propeller 58100-90J01-019

  • Application: Prop fits SUZUKI/Tohatsu/BRP Johnson DF50/60/70/90/100/115/140HP with 15 spline tooth shaft. Please check your engine shaft spline tooth before purchasing. Prop comes with pressed in rubber bush as pictures showing. Please refer to product description area for Detailed Engine Application. Install the new propeller with exist thrust washer, spacer, nut of engine lower unit shaft. Prop comes with new split pin. Please feel free to contact us for installation guideline..
  • HIGH STRENGTH:The innovation of aerospace casting technology to marine aluminium propellers is now a reality, boasting hybrid casting of strontium, aluminium and titanium that are far stronger and durable than ever before. Performing 280MPA tensile and 220MPA yield strength which much stronger than traditional die-casting and squeeze casting props..
  • EXTREME ANTI-CORROSION: Props are robotic powder-coated using AkzoNobel patented anti-corrosive coating powder. More important that it is environmentally safe..
  • EXCELLENT PERFORMANCE: Props are designed based on OEM blade geometry, with appropriate cupping and camber added. Excellent bow lift, acceleration and top speed as well reducing slip,increasing bite..
  • QUALITY GURANTEE: Don't be limited by policy. We offer 12 months free repl....
Check Stock