Reviews Special Thread Taps

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ...bstrate without any additional coatings, and fit a wide range of applications..
  • Practical Function: There are a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

TOMMARS 49-Piece Thread Chaser Set, UNC UNF & Metric Thread Restorer Tool Master Thread Rethreading Kit

  • Thread chaser set includes: UNC(silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4”-20.
  • UNF(black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24, 1/4”-28.
  • Metric(gold): M14*1.5, M12*1.75, M12*1.5, M12*1.25, M11*1.5, M10*1.5, M10*1.25, M10*1.0, M8*1.25, M6*1.0.
  • Special thread repair kit used for chasing worn and damaged threads and cleaning stubborn dirt and corrosion without shaving off metal..
  • A must-have master thread chaser kit for any auto mechanic for chasing threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and bodies of vehicles..
  • Thread chaser set is made of the highest quality carbon steel materials, with strong strength and maximum durability. The dies and taps pieces are hex shaped to use with a wrench or socket..
  • This master thread chaser set is comes with a storage case to keep everything organized. The taps and dies are color coded for easy identification, which helps you differentiate at a glance between coarse, fine, metric, and SAE chasers and dies..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Tap Magic 10004E  W/EP-Xtra - 4 oz,

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America DWT54511 5/16\-18 UNC High Speed Steel Tap Set

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America DWT54523 5/16'-24 UNF High Speed Steel Tap Set

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America 5/16\-18 High Speed Steel Tap Set, T/A Series

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America 3/8\-16 High Speed Steel Tap Set, T/A Series

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America 3/8\-16 High Speed Steel Bottoming Tap, T/A Series

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock