Reviews Snap Lock Pin

Land Rover Genuine ROOF Rail Rack Lock System with Keys Range Rover 03-12 VUB002240

  • ▶【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
  • usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • ▶【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • ▶【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • ▶【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • ▶【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check Stock

Master Lock 2866DAT 1/2 in. and 5/8 in. Swivel Head Receiver Lock for Class I-IV, 1 Pack, Black

  • Receiver lock provides added security and theft deterrence while towing.
  • 1/2 in. trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • Locking head rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • Snap-on cover provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • 5/8 in. (16 mm) Diameter pin fits 2 in. (51 mm) Receiver Tubes, Class III/IV.
  • 1/2 in. (13 mm) Diameter pin fits 1-1/4 in. (32 mm) Receiver tubes, Class II.
  • Usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • Included Components: Two Pins, Two Keys, One Locking Swivel Head.
  • For compatibility with bike or other storage racks, please consult the rack manufacturer’s recommendations prior to using this product.
Check Stock

30PCS Locking Pin Backs Locking Pin Keepers Clasp, Ceryvop Metal Pin Locks Back

  • [Quality Material] Upgraded locking pin backs are made of quality nickel-plated copper, durable and sturdy, unique snap design, locks your needle securely, keep them secure will not fall off or get lost..
  • [Easy to Use] No tools required, spring loaded latch design for easier locking and removal, just push the base to lock and secure them, pull to release the lock and remove it. change your pins whenever you want..
  • [Widely Used] The metal pin backs are suitable for pins, lapel pin, name tags, display books, lanyards, bags, vests, hats, jean button, badge, enamel pin and DIY crafts etc..
  • [Best Choic] 30PCS pin back locks with clear storage case packed, more convenient storage, The size of the pins back is 0.4inch diameter, 0.25inch height, small and easy to use. better meet the decorating needs of you and your family..
  • [Satisfaction Guarantee] We sincerely provide you with high quality products and services. If you have any questions about our products, please contact us and we will provide you with a satisfactory solution for you within 24 hours!.
Check Stock

OEM TE Connectivity/Corcom Brand F6946, Cable Assembly Cord Set 2.29m 3 POS Power to 3 POS Power M-F (1 Items)

  • Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation and control it with our muscles?.
  • The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin..
  • By inserting the pin to its housing and placing a sensor pad into the electrode snap, you can stick the reference cable to a separate section of the body such as a bony portion of the elbow or a nonadjacent muscle near the targeted muscle where the built-in reference pin is unable to reach..
  • Note: Reference cable only. A MyoWare 2.0 Muscle Sensor board will need to be purchased separately..
  • One end of the MyoWare 2.0 Reference Cable has a crimped pin with a tab. This is meant to be inserted into its respective pin housing on the MyoWare 2.0 Muscle Sensor. The tab will lock the pin in place. The other end has a snap pin to connect to a sensor pad. The cable is about 3 inches long..
Check Stock

SimpliSafe Smartlock (White) - Compatible with SimpliSafe Home Security System - Latest Gen

  • The SimpliSafe Smart Lock makes sure your door is always locked. Even if you forget. It locks your door the minute you arm your system or automatically on a timer..
  • Get alerts when anyone locks or unlocks your door. So you know when the kids come home from school or the contractors leave for the day..
  • If someone enters the wrong PIN five times, our lock will notify you. After 15 attempts, it automatically locks your home for 30 minutes..
  • Lock and unlock your door using the PIN pad, the Key Fob or your phone. You can also sync your system with Amazon Alexa or Google Assistant and use that, too..
  • Compatible with your SimpliSafe Gen 3 home security system..
  • Setup is a snap. Place it in the area you want to monitor and 'add device' with your SimpliSafe Keypad.
Check Stock

Let's Go Aero (SHP2040) Keyless Press-on Locking Silent Hitch Pin for 2in Hitches

  • HEAVY-DUTY: 5/8in threaded pin fits 2in hitch receivers tow ratings up to Class IV (12,000 lbs max).
  • REQUIRES HOLLOW SHANK tube tow equipment (not solid).
  • SILENT TOWING: Eliminates distracting hitch clanking, load sway, and absorbs shock loads.
  • STATE-OF-THE-ART: 90-degree lock design swivels for user-friendly, no fumble access win tight hitch spaces.
  • made with corrosion resistant chrome, stainless and hot dip zinc components.
  • EASY TO USE: Snap-On lock secures onto pin without key engagement.
  • ANTI-CORROSION: Heavy-duty lock with nylon jacket and rubber dust core for easy grip and corrosion protection from exterior and interior.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Homebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

ABN Snap Ring Pliers Set – 5 Pc Interchangeable Jaw Head C Clip Pliers Set – Straight, 45, and 90 Degree Angled Jaws

  • REMOVE CONNECTION CLIPS: Use the ABN 5 Piece Interchangeable Snap Ring Pliers Heavy Duty Tools to remove and install internal and external snap rings, circlip, and retaining rings on your lawn mower, tractor, shredder, farm equipment, truck, car, SUV, or other vehicle while performing brake pad removal and routine maintenance.
  • INTERCHANGEABLE JAWS: Quickly switch between 4 different jaw heads or from internal to external use with this 8-in-1 lock ring pliers set.
  • Snap on snap ring pliers works on internal and external snap ring sizes ranging from 3/8 inch to 2 inch (.95 to 5.08 cm).
  • Set includes two straight jaws with different pin sizes, one 45-degree angled jaw, and one 90-degree angled jaw.
  • INTERNAL AND EXTERNAL FUNCTION: Reversible joints and reversible, interchangeable jaws allow for 2 types of function on both internal and external retaining rings.
  • Circlip pliers can compress or expand snap rings thanks to the dual-sided pivot points, making this automotive tool set extremely versatile in terms of vehicles it is compatible with and projects that it will be able to assist you with.
  • Ideal for professional and DIY workshops, garages, and mechanic shops.
  • BUILT TO LAST: Constructed from heat-treated steel, the split ring pliers is designed for strength....
Check Stock

ABN Trailer Tow Hitch Lock Pin and R-Clip, 4in x 3/8in – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV

  • USE YOUR HITCH: Replace old pins and hitch up anything with the ABN Trailer Tow Hitch Lock Pin and R-Clip, 4" x 3/8" Inch – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV.
  • No more struggling to get out those pins, because this hitch pin makes coupling implements and machinery an easy task.
  • PERFECT SIZE: 4-inch (10.2cm) usable length.
  • 6.75-inch (17.1cm) overall length (shaft and handle included).
  • 0.4-inch (10mm) length from pin hole to flat shaft end.
  • Hole for the clip has 0.2-inch (4mm) diameter.
  • GRIP COMFORTABLY: Vinyl coated handle can be gripped and used for pulling force (easier than bent pin design with no leverage available).
  • Attractively bright red handle makes it easy to find when not in use.
  • BUILT TO LAST: Constructed from high-tensile steel and is heat-treated with a powder-coated black finish for long life against weathering.
  • PACKAGE CONTENTS: Package includes (1) hitch pin tool with handle and (1) hitch pin R-clip (hairpin spring cotter bridge pin) for your convenience.
Check Stock

EZOOOOIU 5th Wheel King Pin Lock Solid Steel Trailer King Pin Lock Anti Theft with Bright Yellow Caution Tag 2 Keys for RVs, Container, Trailers

  • 【Wheel King Pin Lock For Anti-Theft】The heavy duty steel king pin lock prevents unauthorized trailer movement by preventing the king pin from mating with a 5th wheel, stops theft. It is physically impossible for the trailer to connect with a 5th wheel while the lock is engaged, the steel lock covers the entire king pin for total security..
  • 【High Quality Material】This trailer king pin lock is made of alloy steel, strong enough for weather resistant, hard to break, has a strong deterrent. The heavy-duty No.45 steel cuff and copper lock cylinder add more difficulties for steal drills, and increase service life..
  • 【Reinforced Anti-Theft Lock】Wheel king pin lock using plum lock, come with two keys for your lock only, the solid steel cuff and kingpin lock are extremely difficult to defeat, the locking pin is incredibly strong, and cannot be disengaged without the key to the lock..
  • 【Fluorescent Warning Tag】This king pin lock is designed to be bright yellow, has strong visible warning, so you could notice if it is still stay in place, each lock includes a fluorescent warning tag on 12" chain, warning information....
Check Stock

LUCKEG Homebrew Pin Lock Disconnect Pin Lock MFL Quick Disconnect with Swivel Nut and Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect MFL type with 5/16" swivel nuts (3 pcs), Pin Lock Liquid Disconnect MFL type with 3/16" swivel nuts (3 pcs), Worm....
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts and Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 5/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

PERA 2 Pair Pin Lock coupler MFL 2 Gas & 2 Liquid Quick Disconnects Set

  • Packing: Pin Lock Gas Disconnect MFL 1/4”(2PCS) , Pin Lock Liquid Disconnect MFL 1/4” (2PCS).
  • Material: PBT Material for Pin Lock Quick Disconnect Body and Stainless Steel for Threaded End.
  • Use: The Pin Lock MFL Disconnects used for Cornelius style Pin Lock keg (Coke), Works for Beer or Soda.
  • A Perfect Gift for Home Brewing and Wine Making Lovers.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock