Reviews Snap Bushing

Compatible Criticare CSI 975PD-10 Spo2 Sensor Probe Reusable Pediatric Soft 9.8 ft 6 Pins Connector Accurate Measurement Fast Responses.

  • Color : Black , Product Name； Cable Snap Bushing.
  • Each Size： 28 x 10mm/ 1.1" x 0.4"(D*H).
  • Net Weight :93g, Package Content : 40 x Cable Snap Bushing.
  • Material : Plastic , Mount Dia :25mm/ 1".
Check Stock

12 pcs Compatible Masimo Disposable Neonatal Adult Spo2 Sensor for Masimo LNCS Neo 1862 Probe Adhesive Tape Sensor 9 Pins 3.2 ft Connector-Pronto-7, Rad-5, Rad-57, Rad-8, Rad-87, Radical-7

  • Height: 11.6mm / 0.46" Mounting Dia: 30mm / 1.18".
  • Package Content: 30 Pcsx Cable Snap Bushing.
  • Suitable for Plate Thickness:0.8mm-3.2mm.
  • Fingertip pressure snap-locks into its mounting hole..
  • Absorbs vibration and insulates cables, tubing, or shafts with limiting internal clearance..
  • Widely used in electrified railway and power grid wire insulation protection, cable snap bushing insulated protection reliable..
Check Stock

Morris 22350 Snap Bushings with Shutters, 1-Inch, Black, 10-Pack

  • Electrical Snap Bushings with Shutters - Our Snap Bushings with Shutters are simple to install..
  • Flexible shutters to accommodate a variety of cable & hose sizes from a minimum of 1/8” to a maximum as shown in the table.
  • Snap bushings with shutters absorb vibration & cushion cables, tubes, etc..
  • Fingertip pressure snap-locks the bushing into the mounting hole.
  • Universal design to hold various cable ranges.
Check Stock

24pcs 9 Pins Compatible Masimo Disposable Neonatal Adult Spo2 Sensor for Masimo LNCS Neo 1862 Probe Adhesive Tape Sensor 9 Pins 3.2 ft Connector-Pronto-7, Rad-5, Rad-57, Rad-8, Rad-87, Radical-7

  • Color : Black , Product Name； Cable Snap Bushing.
  • Each Size： 28 x 10mm/ 1.1" x 0.4"(D*H).
  • Net Weight :93g, Package Content : 40 x Cable Snap Bushing.
  • Material : Plastic , Mount Dia :25mm/ 1".
Check Stock

Middleby 66548 Shaft, Drive Conveyor

  • .500" Mounting Hole Diameter, .125" Maximum Panel Thickness.
  • .391" inside diameter, .578" Head Diameter, .406" Overall Height.
  • Converts raw-edged holes to smooth, neat, insulated holes.
  • Locking fingers "snap" into holes with fingertip pressure.
Check Stock

Ohlectric OL-38479 25 Pcs Polypropylene Bushing For Metal Studs - Protects Wire Insulation From Abrasion - Allows Smooth Wire Pulling - Grommet Protector With Stud Size Of 2x4 Inches - Pack Of 1

  • High-Quality Material: Protect wires and cables from metal studs! OhLectrics stud bushing is made of molded high-strength, non-conductive polypropylene material. The stud bush allows for the installation of multiple cables through a single opening while providing a smooth wire pulling surface for the cables and wires.
  • Easy to Work: Our stud bushings are easy to fit and do not require any tools or skilled workers. This bush helps in pulling the wire of any buildings smoothly making the difficult job much easier. The lightweight property of this bush makes it very comfortable to fit in any irregular shapes of the metal studs.
  • Protects wires and cables: Our stud bushing protects the wire and cables from abrasion of the metal studs. Unlike iron bushes which form rusts and need to be changed regularly these polypropylene stud bushes are truly rust-free and abrasion-free which will long-last for years.
  • Perfect Size: Our universal snap-in stud bushing is made as per standard which comes in the size of 2x4 and hole diameter 1.30" which is a widely used size in industries. These polypropylene bush studs are ideal for all climatic conditions including rain, humid environments.
  • Wide Application: This snap-in stud busing is designed to protect the cables and wires f....
Check Stock

TenPoint HP Aluminum Bushing .305 Inside Diameter (12/Pk)

  • .875" Mounting Hole Diameter, .125" Maximum Panel Thickness.
  • .562" inside diameter, .937" Head Diameter, .453" Overall Height.
  • Flexible shutters adjust to accommodate and support any shape.
  • Locking fingers "snap" into holes with fingertip pressure.
Check Stock

uxcell 24Pcs 19mm Black Plastic Insulation Cable Pipe Hose Snap Bushing Protector Grommet Harness

  • Color :Black ,Product Name :Cable Snap Bushing,.
  • Material :Plastic , Mount Dia: 25mm/ 1". Center Hole Dia :6mm/ 0.24.
Check Stock

uxcell 50pcs 19mm Mounted Dia Snap in Cable Hose Bushing Grommet Protector

  • Material: Plastic. The product is suitable for plate thickness below 3.2mm..
  • Package Content: 50(+/-2%) Pcs x Cable Snap Bushing.
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock