Reviews Small Axis Wire

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

• Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
• Input voltage: 12-24VDC .CNC Router Machine Controller board.
• Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
• support 775 motor, 200W/300W/500W spindle.
• support dual Y-axis use, three-axis and two-axis switching use.
• support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
• Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
• Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
• Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

LM YN ADXL345 Digital 3-Axis Acceleration Gravity Tilt Sensor Module IIC SPI 3V to 5V

• ADXL345 is well suited for mobile device applications. Can measure the static acceleration of gravity in tilt-sensing applications, it can also measure both dynamic acceleration resulting from motion or shock. Its high resolution (4 mg / LSB), capable of measuring the angle of inclination changes less than 1.0 °.003cbr003e.
• Digital output data is 16-bit twos complement format, via SPI (3-wire or 4-wire) or I2C digital access interface.003cbr003e.
• ADXL345 is a small, thin, low-power 3-axis accelerometer with high resolution (13-bit) measurement at up to 16g.003cbr003e.
• The device offers a variety of special detection. Activity and inactivity sensing detect whether the motion occurs, and the acceleration on any axis exceeds the limits set by the user. Tap detection function can detect and double-click action. Free-fall detection can detect whether the device is falling. These functions can be mapped to two interrupt output pins a. 32 First In First Out (FIFO) buffer can be used to store data to minimize host processor intervention.003cbr003e.

8Pcs Omega Spring Replacement 2-Size and 2 Sets of Spring Sets for the Axis Lock on Benchmade 940 535 555 556 557 707 533 810 550 551 552 710 730 Knives and More

• [WHAT YOU GET] – You will get 2 Sets of Omega Spring Replacement, 1 set of large size and 1 set of small size spring set for the Axis Lock on....
• [DURABLE AND STURDY] – All the Omega Springs are made of high-quality 304 Stainless steel and heat treated appropriately..
• [COMPATIBILITY] – The larger size Omega Springs are suitable for Benchmade Axis Lock 810 550 551 552 710 730. And the smaller size Omega Springs are....
• [SPECIFICATIONS] – Spring wire diameter: 0.024 Inch (0.6mm). The Omega Springs length is about 1.06 Inch (27mm) and 0.87 Inch (22mm) respectively..
• [GREAT REPLACEMENT CLIPS] – The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can....

Industrial Industrial Parts Chain Wheel 32-Tooth Industrial Accessories Robot Parts Sprocket for Industrial Robot

• The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g..
• The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface..
• Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °.
• Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption..
• The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact..

12PCS Photosensitive Sensor Module Digital Light Intensity Detection for Electronic Practice DIY

• Product Name: GY-271 QMC5883 L module (Triple Axis Compass Magnetometer Sensor Module/3 Axis Electronic Compass Module Magnetic Sensor Module/3 axis magnetic field module)..
• Means of communication: IIC communication protocol.
• High quality sink gold PCB, mechanical welding process, to ensure quality.The sensor converts any magnetic field to a differential voltage output on 3 axes..
• Wide Application: GY-271 QMC5883L 3-Axis Magnetic Electronic Compass Module is small size of only 13 mm × 14 mm, it can be accommodated in small equipments such as drones reconnaissance aircraft and robot navigation system, mobile phone, laptop computer, car navigation system..
• Package Includes: 2pcs * GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module + 2pcs* Pin Strip..

CAMP Orbit Express KS Quickdraw 6 Pack

4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino

• ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to ± 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire)..
• The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °.
• Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption..
• Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming..
• ULTRA LOW POWER: as low as 23 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)..

4Pcs Omega Spring Replacement, 2 Sets of Spring Sets for the Axis Lock on Benchmade 940 535 555 556 557 707 533 Knives and More

• [WHAT YOU GET] – You will get 2 Sets of Omega Spring Replacement for the Axis Lock on different model Knives..
• [DURABLE AND STURDY] – All the Omega Springs are made of high-quality 304 Stainless steel and heat treated appropriately..
• [COMPATIBILITY] – The Omega Springs are suitable for Benchmade Axis Lock 940 535 555 556 557 707 533..
• [SPECIFICATIONS] – Spring wire diameter: 0.024 Inch (0.6mm) and the Omega Springs length is about 0.87 Inch (22mm)..
• [GREAT REPLACEMENT CLIPS] – The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can refresh or revive your old knives, add years to the life of your old knives with very little time or effort, and save much money..

Iverntech NEMA 17 Stepper Motor with Integrated Tr8x2 2mm Lead 310mm T8 Lead Screw for 3D Printers Z Axis or CNC Machine…

• Iverntech NEMA 17 Stepper Motor with Integrated 310mm Tr8x2 Lead Screw.
• High torque nema 17 stepper motor, 500mN.m, 42x42x48mm, 2 phase 4 wires.
• Come with 1 set anti backlash nut and 1M (39.37") motor wire.
• Great replacement for 3D Printers Z Axis, CNC Milling, Small Robotics, Stage Lighting, Laser Engraving.

H&1 3D Printer with Resume Printing, Heating Platform Integrated Hoisting XY Axis and High-Performance Extruder, Print Size 235 200 200mm

• INTEGRATED DESIGN: Z-axis integrated structure ensures a straight line in the vertical direction of the model.
• XY axis adopts a vertical integrated lifting structure to ensure smooth and smooth movement of the XY axis.
• HIGH-PERFORMANCE EXTRUDER: Open die extruder, smooth and stable extrusion, high-precision alloy nozzle, smooth and uniform wire output, smooth feeding, suitable for printing of various consumables.
• HIGH-PERFORMANCE MOTHERBOARD: Stable and reliable motherboard configuration, stable and smooth printing, stable and reliable.
• ANTI-VIBRATION FOOT PADS: The rubber feet are used in the base. Compared with most rigid base machines on the market, the shock absorption is good and the surface of the model is smoother.
• AFTER SALE: If you have any questions about our products, please contact us immediately, we will reply you as soon as possible after receiving your email.

4Pairs Omega Spring Replacement, 2-Size of Spring Sets, #1 for The Axis Lock on Benchmade 550 551 552 710 730 810, #2 for 555 556 557 707 940 535 533 810 550 551 552 710 730 Knives and More

• Package: You will receive 8 pcs omega spring replacement with 2 size, 4 pcs for each size.
• Material: 304 stainless steel with heat treated appropriately..
• Compatiable with: The #1 omega springs replacement are suitable for benchmade axis lock 550 551 552 710 730 810. The #2 omega springs replacement are suitable for benchmade axis lock 555 556 557 707 940 535 533 810 550 551 552 710 730.
• Size:spring wire diameter 0.024 Inch (0.6mm). The omega springs length is about 1.06 Inch (27mm) and 0.87 Inch (22mm) respectively..
• The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can refresh or revive your old knives, add years to the life of your old knives with very little time or effort, and save much money..

SST Industrial Automatic Wire Stripping Machine | Drill-Powered Scrap Wire Insulation Removal

• 100% METAL CONSTRUCTION - No Plastic Machined Masterfully from 6061 Aluminum with a hard Gun-metal Anodized Finish for Maximum Durability and Strength.
• TUNGSTEN STEEL BLADE - Our Extra Hard Blade Stays Sharper, LONGER, with Consistent Depth of Cut Through Thousands of Feet of wire and cable stripped. Compared to Others, you Will Only Need to Replace Your Blade Half as Much.
• ADJUSTABLE WIRE GUIDE - The Four Slot Wire Guide Ensures a Perfect Cut Every Time, Whether Stripping Solid or Stranded Wire. Easily Removes Insulation on Wires 18 Gauge Up to 300 MCM with Ease..
• ULTRA-GRIP WIRE STRIPPER TECHNOLOGY - Our 5-Axis Machined Ultra-Grip Gears Provide a Superior Grip on the Wire, Making it Easy to Strip the Thickest Cables or Wires You Can Find.
• "3 YEARS WARRANTY + CONGRATULATORY CERTIFICATE IF BROKEN - We'll Make Sure Your Machine Can Strip as Much Scrap Copper as You Can Throw at it! Backed by 3 Year SST Warranty, We Stand Behind the Quality and Accuracy of All Our Tools".

Axis Scientific Skeletal Hand with Wrist, Ulna, and Radius, Fully Articulated Flexible Hand Skeleton is Secured with Wire to Demonstrate Movement, Includes Base for Demonstration and Study and Worry Free 3 Year Warranty

• SKELETAL HAND ANATOMICAL MODEL: The Axis Scientific Skeleton Model of the Human Hand offers practitioners and students incredible and descriptive detail of the structures of the hand and wrist, including a complete human hand and the lower portions of the ulna and radius bones. Bones of the hand are held together with high quality wire which also allows for flexibility and mobility while interacting and learning with this quality anatomy model..
• WORRY FREE 3 YEAR WARRANTY: Every Axis Scientific anatomy model comes with a no-hassle 3-year warranty. If there are any issues with your model just contact our US-based customer service team and we will replace or refund your purchase..
• ANATOMICALLY CORRECT: This hand model was developed by medical professionals and cast from an original human skeleton. Be aware of cheap imported human anatomy models that have anatomical inaccuracies and lack the same level of detail..
• HIGH QUALITY: Axis Scientific anatomy models are hand-painted and assembled with the utmost attention to detail. This anatomy model is perfect for the doctors office, anatomy classroom, or study aid..
• BEST IN CLASS CUSTOMER SUPPORT: Our USA based support team is ready to answer any questions you may have about Axis Scientific anatomy Models..