Reviews Axis Accelerometer Module

HiLetgo ADXL335 3-Axis Accelerometer Angular Transducer Sensor GY-61 Module Analog Output 3-5V

  • BW adjustment with a single capacitor per axis.
  • Three-axis accelerometer module magnetic field..
Check Stock

UMLIFE 3PCS 6DOF 6-Axes Sensor Module Gravity Sensor GY-BMI160 Module Accelerometer Gyroscope Acceleration Gravity Sensor IIC I2C 3-5V for Arduino

  • Communication: standard IIC communication protocol.
  • ✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package..
  • ✹✹The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data..
  • ✹✹In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices..
  • ✹✹3PCS 6DOF Bosch GY-BMI160 Module 6-axis Acceleration Gyro Gravity Sensor for Arduino.
Check Stock

AEDIKO 2pcs MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor IIC/SPI 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module

  • Power Supply: 3-5V (Internal Low Dropout Regulator).
  • Communication: Standard IIC Communication Protocol.
  • Built-In 16Bit AD Converter, 16-Bit Data Output.
  • 9-Axis Motion Tracking: 3-Axis Gyroscope, 3-Axis Accelerometer, 3-Axis Magnetometer and a Digital Motion Processor (DMP).
  • MPU9250 Module Includes Pull-Up Resistors On the SDA, SCL, and NCS Lines.
  • Pull-Down Resistors On the FSYNC and AD0 Lines.
  • MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Using Immersion Gold PCB, Machine Welding Process to Ensure Quality.
Check Stock

6pcs GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Sensor Module 6 DOF MPU-6050 16Bit AD Converter Data Output IIC I2C DIY Kit for Arduino

  • 【GY-521 MPU-6050 Module】Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port.
  • 【Built-in Chip】With three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs..
  • 【Easy to use】The measured values of the sensor can be interrogated by the I2C interface. The accelerometer can be operated at both 3.3V and 5V. Suitable for Arduino and Raspberry Pi..
  • 【User-programmable Gyroscope】With a full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer with a full-scale range of ±2g, ±4g, ±8g, and ±16g Supports the I2C serial interface and has a separate VLOGIC reference pin..
  • 【Universal Usable】The sensor can be used to develop various entertaining applications and systems. Ideal for projects with gaming and virtual reality devices, GPS navigation (for drones and RC planes) and DIY robots..
Check Stock

Acceleration Sensor Development Tools Triple-axis Accelerometer+Magnetometer (Compass) Board - LSM303

  • Triple-axis accelerometer/magnetometer compass module.
  • Tells you which direction is down (by measuring gravity).
  • Also tells where the strongest magnetic force is coming from.
  • Easy use with either 3 or 5V microcontrollers.
Check Stock

ZYAMY GY-521 MPU-6050 Sensor Module for Arduino DIY Kit 3 Axis Analog Gyroscope Sensors + 3 Axis Accelerometer 6DOF Module with Pins 3-5V DC MPU6050

  • Name: GY-521 MPU-6050 Module (3 Axis Analog Gyroscope + 3 Axis Accelerometer).
  • Chip: MPU-6050, chip built-in 16bit AD converter, 16-bit data output.
  • Power Supply:3-5v (internal low dropout regulator).
  • Communication: standard IIC communication agreement.
  • Gyroscope Range: +/- 250 500 1000 2000 ¡ã/s.
  • Acceleration Range: +/-2 +/-4 +/-8 +/-16 g..
Check Stock

GY-521 MPU-6050 MPU6050 Module, 3 Axis Accelerometer 6 DOF Gyroscope Sensor Module Kit 16 Bit Converter Data Output IIC 3-5v Compatible with Arduino (10 Pieces)

  • GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensors.
  • Parameter range: the MPU-6050's angular velocity range is ±250, ±500, ±1000 and ±2000°/sec (dps) for accurate fast and slow motion, and user-programmable accelerator full-frame sensing the range is ±2g, ±4g±8g and ±16g.
  • Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
  • Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
  • Easy to use: the measured values of the sensor can be interrogated by the I2C interface.
  • The accelerometer can be operated at both 3.3V and 5V.
  • Compatible with Arduino and Raspberry Pi.
  • Universal usable: the sensor can be applied to develop various entertaining applications and systems.
  • Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots.
Check Stock

AITRIP 3pcs MPU9250 BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor for Arduino 3-5V

  • Built-in 16bit AD converter chip, 16bit data output.
  • Power supply: 3-5v (low dropout internal regulator).
  • Communication: IIC / SPI standard communication protocol.
  • MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure).
Check Stock

CURT 51170 Spectrum Original Equipment Style, Integrated Electric Trailer Brake Controller, Proportional

  • FACTORY LOOK. The Spectrum trailer brake controller is designed to mount onto the dash of your vehicle and integrate with the other controls like a factory brake controller.
  • It allows you to control and monitor all brake settings using a simple knob. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • To maintain powerful trailer brake operation without obstructing your vehicle dash, the computer module of this brake controller is separate from the control knob and can be mounted out of sight.
  • This trailer brake controller operates with an integrated circuit called a triple-axis accelerometer.
  • This circuit detects motion on three planes and provides braking power accordingly, up or down a hill.
  • The Spectrum electric brake controller is highly adjustable to accommodate different vehicles, trailers and loads.
  • The push-button knob offers easily accessible manual override whenever needed.
Check Stock

[Military-Grade Accelerometer+Inclinometer] HWT901B-TTL MPU9250 9-axis Gyroscope+Angle XY 0.05° Accuracy +Digital Compass+Air Pressure+Altitude RM3100 Magnetometer Compensation and Kalman Filtering

  • 【 High Performance 】Rock-solid data output: 10-Axis Military-grade Pitch Roll Yaw (X Y Z axis) Accelerometer + Angular Velocity + Angle +Magnet....
  • 【 Robust Design 】Equipped with 32-bits processor, highly-integrated MEMS module, ensuring high performance in the harsh environment, large....
  • 【 Military-Grade Inclinometer 】RM3100 magnetometer-compensation chip with automatic data correction, and Kalman Algorithm combine to deliver....
  • 【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman....
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the....
Check Stock

12PCS Photosensitive Sensor Module Digital Light Intensity Detection for Electronic Practice DIY

  • Product Name: GY-271 QMC5883 L module (Triple Axis Compass Magnetometer Sensor Module/3 Axis Electronic Compass Module Magnetic Sensor Module/3 axis magnetic field module)..
  • Means of communication: IIC communication protocol.
  • High quality sink gold PCB, mechanical welding process, to ensure quality.The sensor converts any magnetic field to a differential voltage output on 3 axes..
  • Wide Application: GY-271 QMC5883L 3-Axis Magnetic Electronic Compass Module is small size of only 13 mm × 14 mm, it can be accommodated in small equipments such as drones reconnaissance aircraft and robot navigation system, mobile phone, laptop computer, car navigation system..
  • Package Includes: 2pcs * GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module + 2pcs* Pin Strip..
Check Stock

Dorhea 5PCS ADXL345 Digital Inclination Sensor Acceleration Module Digital Tilt Angle Sensor Gravity 3-Axis AVR ARM MCU for Ardu ino

  • ADXL345, it's a low cost cap-based accelerometer sensor, 3-axis accelerometer with high resolution (13-bit), high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°..
  • Digital output data is formatted as 16-bit twos complement, supports I2C/SPI, low power, compact accelerometer..
  • The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock..
  • Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds..
  • individually to either of two interrupt output pins..
Check Stock

Skystars F7HDPRO Brushless Flight Controller Compatible with DJI and Betaflight OSD F7 Flight Control Board for FPV Freestyle Drone Airplane Fixed Wing Quadcopter DIY Accessories Parts

  • Designed the LED installation position in the four corners,support WS2812 Programable LED..
  • Supports serial receivers (CRSF,SBUS, iBus, Spektrum) . Support 3.3V Satellite Receiver..
  • High-performance / low-noise / high sensitivity IMU. BMI270 with 6-axis gyro and  accelerometer. .
  • Input voltage10V-26V (3-6S). Automatic voltage monitoring..
Check Stock