Reviews Silicate Cement

10.1 oz Dap 18854 Black Mortar High Heat Pack of 12

  • Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
  • Used for applications in wood frame construction where an ASTM E136 non-combustible sealant.
  • Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
  • Use to tuck point between firebricks and to repair broken firebricks.
  • It has been tested in accordance with ASTM E136 and withstands temperatures up to 2,000° F.
Check Stock

Geesic 60'' x24'' x1'' (Thick) Ceramic Fiber Blanket Fireproof Insulation Baffle Rated to 2400F, High-Temperature Resistance for Oven Stoves, Kilns, Forges

  • 1、Specification: 1"(Thick) 1inch (Thick) x24inch x60inch.
  • 2、High Temperature Insulation: Ceramic fiber blanket is high heat and fireproof blanket, with high temperature resistance, insulation and fireproof.
  • 3、Easy to Install: easy to install by using mechanical fastening or high temperature adhesive, such as sodium silicate, refractory cement or RTV silicone.
  • 4、Easy to Operate: easy to cut and press by using a sharp knife or blade Very easy to transport and install.
  • 5、Applicable to: fireplace insulation, foundry, such as wood stove baffle, fireplace, pellet stove, chimney, boiler, pizza oven, forging furnace, brazing, welding, soldering, muffler packing, etc.
Check Stock

Simond Store Ceramic Fiber Insulation Roll, 6# Density 2600F, 1' X 24' X 12.5' Fireproof Insulating Blanket for Pizza Oven Forges Foundry Furnace Wall and Dishwasher Insulation

  • Fireproof Insulation: Ceramic fiber blanket, rated to temperature of 2600F, 1 inch X 24 inches X 150 inches, density 6lbs..
  • Chemical composition: Alumina (32%-34%), Silica (49%-52%), Zircon (14%-18%)..
  • For Whom: Perfect for Blacksmiths, Pottery Workers, and Refiners..
  • Uses: Insulation for Forge, Furnace, Kiln, Knife Making, Pizza Ovens, Outside Ovens, , Wood Stove, Home Foundry, Heat Treatment & Glass furnaces and in process of Glass blowing, Turbine, Brazing, Welding, Soldering, Muffler packing, Fireplace Insulation, Boiler, Foundries, Refractory Wool, Glass Blowing, Jewellery Making, Fireproof Doors..
  • Easy Installation: Easy to install with mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone..
Check Stock

Zerex Asian Vehicle Red Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA

  • Formulated to replace the OEM fluid in Asian make vehicles such as Toyota , Lexus , Scion and others requiring a red, silicate free HOAT antifreeze/coolant.
  • 5 year/150, 000 mile . Silicate-free, long-life, phosphate Hybrid Organic Acid Technology chemistry.
  • The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits.
  • Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A.
  • Note: Please check the vehicle specification before purchasing the item..
Check Stock

Zerex Asian Vehicle Blue Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA

  • 5 year/150, 000 mile . Silicate-free, long-life, phosphate Hybrid Organic Acid Technology chemistry.
  • Formulated to replace the OEM fluid in Asian make vehicles such as Honda, Nissan, KIA, Hyundai and others requiring a blue, silicate free HOAT antifreeze/coolant.
  • The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits.
  • Meets the following OEM and industry specifications: Hyundai/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A.
  • Contains 30 – 50 ppm of denatonium benzoate as a bittering agent.
Check Stock

Zerex Asian Vehicle Green Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA, Case of 6

  • Formulated to replace the OEM fluid in Asian make vehicles such as Hyundai, KIA, Mazda, Mitsubishi and others requiring a green, silicate free HOAT antifreeze/coolant.
  • 5 year/150,000 mile guarantee. Silicate-free, long-life, phosphate Hybrid Organic Acid Technology chemistry.
  • The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits.
  • Meets the following OEM and industry specifications: HYUNDAI/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, ASTM D3306, ASTM D4985, FORD* WSS-M97B55-A, Federal Specification A-A-870A, SAE J1034, SAE J814, SAE 1941.
  • Contains 30 – 50 ppm of denatonium benzoate as a bittering agent.
Check Stock

CRYSTAL Deodorant Stick (30003), Unscented, 4.25 Ounce, White

  • Water%2C Magnesium Aluminum Silicate%2C Aluminum,) Aqua%2C Silicon Dioxide%2C P… 2/3 VIDEOS PRODUCT AVP Water, Magnesium Aluminum Silicate, Aluminum-Zirconium Tetrachlorohydrex Gly, Sodium Lactate, Cyclomethicone, Glyceryl Monostearate, Lecithin (and) Arbutin (and) Linolenic Acid (and) Linoleic Acid (and) Tocopheryl Acetate (and) Ascorbyl Palmitate (and) Glutathione (and) Alcohol (and) Aqua, Silicon Dioxide, Propylene Glycol, Ethylhexylglycerin, Octenidine HCI, Dimethyl Phenylbutanol, Fragrance.
Check Stock

Spex SamplePrep 2155 Grinding Balls, Stainless Steel, 3/8\ (9.5 mm); 100/PK

  • Corrosion resistance to acid, alkali and salt, smooth surface, easy to clean.
  • High mechanical strength, impact resistance, high-speed operation without fragmentation..
  • Large specific gravity (specific gravity 6.05), the greater the quality of the grinding beads, the greater the shear force provided and the higher the grinding efficiency..
  • Wear resistance: 30-50 times as much as glass beads and 8 times as much as zirconium silicate beads. Grinding efficiency: 10-12 times as much as glass beads and 4-6 times as much as zirconium silicate beads..
  • It is suitable for grinding materials with high hardness and viscosity..
Check Stock

D'Addario Accessories Glass Slide, Small, PWGS-SS

  • 003cp003ePlanet Waves Glass Slides are made from boron silicate for enhanced durability, smoothness and tone. The Large slide is perfect for players who like a full length slide for their 1st, 2nd or 3rd finger. 003c/p003e003cp003eEach Planet Waves Glass Slide is individually heat treated to provide smooth edges and a perfect finish allowing the slide to glide over strings while the 4mm glass thickness produces a warm, thick tone. These slides are available in small, medium and large sizes.003c/p003e003cp003ePlanet Waves, part of the D'Addario family of brands, is known for innovative, problem-solving, quality musical accessories. Planet Waves offers a complete line of award-winning accessories including cables, picks, tuners, capos, straps, humidifiers, maintenance tools and more.003cp003e.
  • Made from boron silicate for enhanced durability, smoothness and tone.
  • Flawless finish and extra smooth surface glides over strings.
  • 4mm wall thickness produces warm, thick tone and sustain.
  • Available in small, medium and large sizes.
Check Stock

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
  • 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
Check Stock

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
Check Stock

5 X 6 FIBER CEMENT BLADE CARDED

Check Stock

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
  • Make sure to mix the paint and cement dry powder first, then add water and stir!.
Check Stock