Reviews Sheet Metal Welding Clamps

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

10PCS Toggle Clamps 201 Quick Release Hand Tool Antislip Red Horizontal Clamp 60Lbs Holding Capacity

  • 【THE GOODS IN THE PACKAGE】:10Pcs Toggle Clamps 201.
  • 【TOGGLE CLAMP SIZE】：7.8 x 2.8 x 1.8cm/ 3" x 1.1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【MATERIAL】: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
  • Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips..
  • 【WIDE USAGE】Rugged fixtures are best for quickly holding down sheet metal or circuit boards,for machine operation,woodworking,welding,mould,electronic equipment assembly,etc field.Widely used on during welding processing, riveting processing and other processing of fixture products..
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

Glarks 3 Pack Stainless Steel Welding Gauge Set, 25-3000um Wet Film Comb + Wire Metal Sheet Thickness Gauge + Round Dual-Sided Wire Cable Sheet Gage Standard Thickness Metal Gauge AWG and SAE

  • ★【What You Get】: In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gage total 3 pack. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: Wet film comb range is 25-3000um. Dual-sided round wire gauge range is 0-36 American standard.
  • Wire metal sheet thickness welding gauge is 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ★【Pratical Measuring Tools】: The interval division on the gauge is detailed and having high measuring precision. Sizes and numerals are etched on the surface for clarity and easier reading. Good to determine the thickness of the material before welding or working, permits a quick and accurate measuring of the most popular welding thickness..
  • ★【Wide Application】: They measure accurately and have almost no errors. Wet film c....
Check Stock

Gauge Metal Sheet Thickness Gauge Metal Gauge Tool Stainless Steel Thickness Gauge ONE-Sided Material Wire Thickness Gauge Plated Size Inspection Tool (3)

  • Portable: pulling this metal gauge tool out of your pocket to measure metal is quicker and easier than using a tape measure.
  • Material: made of quality stainless steel, anti-rust and corrosion resistance, so the metal thickness gauge welding can serve for a long time application to avoid frequent replacement.
  • Package includes: you will receive 3 pieces of metal sheet thickness gauge, and the size is 1.0 inch in width and 2.8 inch in length.
  • Practical handy tool: you can determine the thickness of the material before welding or processing and measure the most popular welding thickness quickly and accurately.
  • Must-have accessories: the sheet thickness gauge is useful for checking metal sheet wire size before welding or working, and is also durable and easy to read.
Check Stock