Reviews Shaft Seals

Timken 710596 Axle Shaft Seal

  • APPLICATION: Compatible with 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
  • FUNCTION: This tool is necessarily if you want your vacuum locking hubs to work after replacing the axle seals since it prevents front hub vacuum leaks that would cause the 4WD not engage and covers in oil to prevent corrosion..
  • EASY TO USE: This tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly..
  • MATERIAL: Made of high quality steel, the surface with black oxide finish ensures great strength and durability while resisting rust and corrosion( It is normal that there are iron filings in the groove, if you mind, please buy it carefully )..
  • REPLACES PART# 6695: Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
Check Stock

McDermott Billiards Pool Cue Shafts Maintenance Kit McMagic Micro Burnishing Papers + Ultra-Glide Shaft Conditioner + Renew Shaft Cleaner + Leather Pad Shaft Conditioner

  • McMagic Micro Burnishing Papers - Washable reusable shaft conditioning system for smoothing shaft.
  • Ultra-Glide Shaft Conditioner - Seals wood pores in the shaft, eliminates built up dirt, moisture and oils, promotes optimal feel for a more controlled stroke.
  • Renew Shaft Cleaner - Eliminates drag due to dirt and oils on the shaft surface. Improves your stroke, quick and easy to use to make your shaft and ferrule look and feel like new.
  • Leather Pad Shaft Conditioner - For smoothing and polishing shaft.
Check Stock

Lisle 58500 Hook for Shaft/Seals , RED

  • Removes cam shaft and crank shaft seals without damage to the shaft.
  • Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes.
  • For more information check the main Lisle tool- 58430.
Check Stock

All Balls 22-1039 Steering Bearing Kit

  • Specs: Crank Shaft Bearing Kit , 2 Seals, 2 Tapered Bearings.
  • Kits contain upper and lower tapered bearing sets (cup & cone) along with specially designed seals tkeep water and dirt out and grease in.
  • Compatible With/Replacement For: Aprilia Caponord 1200 2014-2017, EVT Caponord 2001-2007, RST 1000 Futura 2001-2004, RSV Mille 2000-2003, RSV Tuono 2002-2005, RSV4 APRC R 2009-2015, RSV4 FACTORY 2009-2015, RSV4 RF 2016-2018, RSV4 RR 2016-2017, RSVR 2004-2008, SL 1000 Falco 2000-2003, Tuono 1000 R 2006-2015, Tuono 1100 V4 2016-2018, Tuono 1100 V4 RR 2016-2018, Ducati 1098 2007-2008, 1098 R 2008, 1098 R Bayliss 2009, 1098 S 2007-2008, 1098 S Tricolore 2007-2008, 1198 2009-2010, 1198 R 2010.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Crank Shaft Bearing Kit built to meet OEM specifications.
Check Stock

Auto Express Honda GX390 13 HP Short Block Engine Crank Shaft Camshaft Crankcase New

  • Includes: Engine Block with Piston and rings, Piston Pin, Connecting Rod, Crankshaft, Crank Seals, Crankcase Cover, Camshaft Balancer, Shaft, Low Oil Sensor, Governor, Oil Dipstick/Fill Cap.
Check Stock

Rita Hazan Triple Threat Split End Repair-Anti-breakage Hair Repair 1.7oz

  • SEALS—Immediately seals broken hair and split ends.
  • Pump a dime size amount and apply to damp or dry hair from mid-shaft to ends. Style & Dry as usual..
  • Serum laser targets breakage, repairing it instantly.
Check Stock

GStar Premium 2 Hose 12' Hookah Set (Blue)

  • GStar Premium 2 Hose 12" Pumpkin Hookah Set.
  • Parts: (1) Glass Vase, (1) Shaft w/ Downstem, (2) Hoses, (1) Ceramic Bowl, (1) Ashtray - All Rubber Seals Included.
  • Easy to Assemble, Disassemble, Clean & Store Away - Perfect for Home or for Travel.
  • The Vase is 3.75" tall and the stem/shaft is 9" Tall.
  • Comes with warranty, please contact your seller if you have issues such as missing or broken pieces with your hookah set, they are here to help.
Check Stock

McDermott Silky Shaft Wax Special Micro-Protection Formula Carom Billiards Pool Cue Care Wooden Shaft Maintenance Accessories 50gram

  • Specifically developed by McDermott's Advance Micro-Protection Formula to provide excellent cue care experience for your beloving cue shaft collection.
  • Significantly help cleans, seals and improve your wooden cue shaft's condition in just 1 step by evenly apply a small amount onto the shaft using a clean cloth or by hand - Easy process for making your shafts smoother to the touch.
  • Made from natural olive oil and beeswax with no residue or buildup after appliance - Green ECO Product.
Check Stock

Vacuum Pump Reseal Kit for Cummins Vacuum Steering Pumps 91-02 Wabco Dodge Ram Diesel VITON DOUBLE LIP SEAL

  • Only Kit with Viton Shaft Seal With Double Lip (Rides On New Shaft Areas).
  • Includes Main Seals Required For Leak Free Rebuild.
  • For a fully leak free seal, we suggest a bead of RTV instead of a pump to case gasket.
Check Stock

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

  • J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions..
  • 1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions..
  • Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation..
  • Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M..
  • Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones..
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

  • Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
  • Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
  • Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
  • Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
  • 100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock