Reviews Shaft Parts

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • ... also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the parts is more even, and the friction and the efficiency of transmission or driving force are greatly increased..
Check Stock

Stainless Steel Shaft, Linear Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the parts are more evenly stressed, and the efficiency of the driving force is enhanced..
  • APPLICABLE MATCHING - Circlip groove hexagonal shaft has the advantages of round shaft and hexagonal shaft, and can be used with different hexagonal hole matching robot parts..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wearproof, durable, long service life, stable performance, to meet your different needs..
  • COMPATIBLE WITH - Can pass through bearings with an inner diameter of 8mm, used in conjunction with robot parts matching hexagonal holes, to enhance load carrying capacity and transmission capacity..
  • THREAD - The hexagonal shaft with spring groove and thread is convenient to limit the axial movement of the bearing in the combination, effectively improving the work efficiency..
Check Stock

ST2000Z 1967-95 forGM Cars Upper Steering Column Snap Ring

  • 【High Quality】The Lower Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is made of high quality material and maintain a good strength to give the parts long time performance..
  • 【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • 【Compatibility】This Steering Shaft fits for 004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Toyota Tacoma 4WD and PreRunner 2WD in Lower Steering Column..
  • 【Replace OE Part】# 4520304021, 45203-04021. This Steering Column Intermediate Shaft will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • 【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the RLower Intermediate Steering Shaft Assembly, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Rescue Equipment Three-Piece Set RC Steel Rope / Pulley / Lock Sleeve for RC Model Car Climbing Vehicle

  • 2A means center shaft is 1.95mm and close-fitting with 2mm shaft. 2B means center shaft is 2.05mm and loose-fitting with 2mm shaft.
  • The products are for toys pulleys spare parts, suitable for DIY model technology production.
  • Made of high quality plastic, wearable and long service life.
  • This is the pulley set including 7 kinds of gear parts. It can meet your DIY needs.
  • Small parts, easy to use, great model making accessories for all kinds of cars, robots, etc.
Check Stock

ECCPP Complete Rear Drive Shaft Prop Shaft Assembly Fit for Porsche Cayenne 2003-2010 for VW Touareg 2004-2008

  • COMPATIBLE VEHICLES - Compatible for Porsche Cayenne 2003 2004 2005 2006 2008 2009 2010, Compatible for Volkswagen Touareg 2004 2005 2006 2007 2008 2009 2010. Please enter your Year / Make / Model information in the query tool at the top left to confirm your fitment.
  • COMPREHENSIVE TEST - The drive shaft is a rotating body with high speed and few supports. So we have balanced and tested the drive shaft. In addition, we will carry out strict tests on the specification of the drive shaft and the power transfer efficiency of the universal joint, to ensure that the drive shaft meets optimum performance and specifications.
  • WHY REPLACe - When your drive shaft fails, the car would start with a clucking sound, and the chassis would always produce abnormal noise and the car body would produce obvious vibration during driving. This is usually due to wear and tear of the drive shaft and its parts, deformation and loss of dynamic balance. It will make your car less powerful and use more energy, and make your driving experience worse. So it is necessary to inspect and replace timely.
  • DIRECT REPLACEMENT - OE standard specification, lubricated has been carried out. You will get 1 drive shaft with center support bearing and 1 bearing support fR-ame with 2 bolts. Pl....
Check Stock

1/4\ x 2\ C360 Brass Flat BAR 13\ Long Solid .250\ Plate Mill Stock H02

  • Wide Applications --- These rods can be cut and formed into replacement parts for almost anything, you are only limited by your imagination. Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars..
  • Scope Of Application--- Suitble for high speed machining operations and intricate parts of manufacture.
  • Easy To Cut --- It is the combination of machinability, thread rolling and knurling.
  • Good Quality-- Made of premium brass, good strength, high resistance to corrosion.
  • What You Get --- We have prepared 1pcs high quality brass rod for you to meet any of your needs and you deserve them..
Check Stock

Hilitchi 120-Pcs [100 to 500K] ohm 3296W Multiturn Trimmer Potentiometer Assortment Kit - [12 Value]

  • knob Size: 14 x 17 mm / 0. 55" x 0. 67" (d*h).
  • material: metal, electronic parts, carbon film.
  • package: 5 x Potentiometer 5 x knobs some x nut parts.
Check Stock

2 Pcs 0.94 Microwave Turntable Coupler Microwave Oven Turntable Roller Guide Support with D Port Shaft Length 0.94 / 24mm

  • High-quality Microwave Turntable Coupler - Made of high temperature resistant PPS material, not easy to scratch, durable, long service life, suitable....
  • Product Size - Shaft length: 0.94"/24mm. Please measure the shaft length before purchasing, shaft outer diameter, and shaft inner diameter of the....
  • Replacement Parts for Microwave Ovens - Excellent replacements for old parts or damage, good microwave oven accessories, make your microwave oven a....
  • Package Include - 2 x microwave oven rotating cores, suitable for rotatable connectors, strong bearing capacity, necessary for the rotation of the....
  • Reminder - As long as the size in the picture is the same, all brands of microwave ovens can be used. (Because of the different measuring methods, it....
Check Stock

Fluval 404-405 Tune Up Kit

  • Bundle Includes: Magnetic Impeller, Impeller Cover, Ceramic Shaft and Rubber Support, Motor Seal Ring.
  • All items in the bundle are replacement parts created for the Fluval 405 External Canister Filter.
  • The Impeller Cover, Ceramic Shaft and Rubber Support, and Motor Seal Ring are also suitable for Fluval 305 External Canister Filter.
  • Extend the working life of your aquarium filter with our tune-up kit of spare parts.
Check Stock

Go Kart/Mini Bike Clutch Centrifugal Clutch Engine Clutch 5/8 Inch Bore #35 Chain 12 Tooth 12T Chain 6.5HP

  • Fit 2 - 6.5 HP Small Engines Parts Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3 4 Bore 12 Tooth #35 Chain.
  • Fit Briggs & Stratton 2 - 6.5 HP with 3/4" Shaft 212 212cc Predator Engine Clutch.
  • Fit Centrifical Tecumseh Engines 2 - 6.5 HP with 3/4" Shaft and Any Other Go Cart Motor Auto Engines with 3/4 Crank Shaft and 3/16" Key Way.
  • 3 4 inch Bar Centrifugal Clutch Performance Parts.
Check Stock

Dorman 425-183 Steering Shaft Compatible with Select Models

  • 【High Quality】The Intermediate Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is....
  • 【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent....
  • 【Compatibility】This Steering Shaft fits for Cadillac Escalade ESV EXT.
  • 19153614, 425-176 . This Steering Column Intermediate Shaft will meet or exceed OEM....
  • 【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the Intermediate Steering Shaft Assembly,....
Check Stock

Electric Scooter Folding Pole Base, Electric Scooter Replacement Part Accessory for Xiaomi M365 (Grey)

  • DURABLE MATERIAL - The folding pole base is made of high quality metal material, sturdy, anti-rust and very durable, easy to install and connect to the folding pole. More resistant than original part..
  • EASY TO USE - The replacement parts for the poles are foldable and easy to use. Regular replacement is good for better use, fabricated with high precision with good impact strength and wear resistance for perfect fitness..
  • UPGRADING PARTS - Replacement or upgrading parts for Xiaomi M365 shaft locking. Reinforced and upgraded design for a better drive, less mechanical play and more firmness..
  • COMPATIBLE MODEL - Shaft Locking Screw Replacement Parts perfect fit For Xiaomi M365 Electric Scooter..
  • FOLDING DESIGN - The folding pole base adopt folding design, mini size, easy to carry and storage..
Check Stock

TEKTON 6943 Precision Pick and Hook Set, 4-Piece

  • Heat treated, chrome vanadium steel shafts.
  • Cushioned, non-slip grips for extra control.
  • Knurled shaft grip area for precise work.
  • Ideal for assembly, repair, or removal of small parts.
  • Set Includes: 1-pc. Full Hook, 1-pc. 45-degree, 1-pc. 90-degree, 1-pc. Straight Pick.
Check Stock