Reviews Through Shaft

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock

Hamilton Beach Commercial BigRig Immersion Blender

  • ...lude 12-in / 305mm, 14-in / 355mm, 16-in / 406mm, 18-in / 457mm, and 21-in / 533mm. (Sold separately).
  • WALL MOUNT AND CORD HOLDER – Separate accessory for hanging up the unit when not in use, and a notch integrated into the unit for neat, easy storage..
  • MOST POWERFUL MOTOR IN ITS CLASS – The BigRig powers through soups, sauces, salsas, and salad dressings..
  • PATENT PENDING SERVICEABLE CORD – High-visibility 12 ft/ 365cm yellow power cord can be serviced by an HBC-accredited service center..
  • UNIQUE 2-POSITION COMFORT HANDLE – Plus an ergonomic shaft grip offers multiple hand positions for ease and comfort during blending..
  • HEAVY DUTY STAINLESS STEEL BLADE WITH GUARD – Blends, chops, purees or emulsifies ingredients quickly. The guard prevents splashing and moves the ingredients around for better blending..
  • SOFT TOUCH CONTROLS AND CONTINUOUS RUN – Patent pending Light-touch and trigger controls with an option for continuous run operation allow operators to quickly power through high volume blending jobs..
Check Stock

F273401 73404 Pilot Assembly For Portable Buddy Mr Heater MH9B MH9BX and Dewalt Small Propane Heater

  • Part #32017. Mr. Heater replacement temperature / fuel control knob for MH9BX Mr. Heater Portable Buddy Propane Heaters (mfg 2009 through Present)..
  • This knob has a 23.5mm OD shaft size. Please measure outside diameter of knob shaft for proper fit..
  • For use on Mr. Heater, Heat Star, and Enerco MH9BX (mfg 2009 through Present) Portable Buddy Propane Heaters..
  • (*Use Part #73418 knob for heaters manufactured prior to 2009, where the knob has 12.7mm shaft base*.).
Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SF 1 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 1.44\ Bore, 3.125\ OD, 2.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Stainless Steel Shaft, Linear Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the parts are more evenly stressed, and the efficiency of the driving force is enhanced..
  • APPLICABLE MATCHING - Circlip groove hexagonal shaft has the advantages of round shaft and hexagonal shaft, and can be used with different hexagonal hole matching robot parts..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wearproof, durable, long service life, stable performance, to meet your different needs..
  • COMPATIBLE WITH - Can pass through bearings with an inner diameter of 8mm, used in conjunction with robot parts matching hexagonal holes, to enhance load carrying capacity and transmission capacity..
  • THREAD - The hexagonal shaft with spring groove and thread is convenient to limit the axial movement of the bearing in the combination, effectively improving the work efficiency..
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock