Reviews Shaft Material

Four Seasons 26777 Cap & Valve Air Conditioning System Seal Kit

  • 【High-quality material】Air Conditioning Compressor Shaft Seal Kit,It is made of high-quality rubber and metal, which has the advantages of anti-aging, oil resistance, corrosion resistance, etc., and has a long duration of use and is not easy to damage..
  • 【Direct Replacement】A/C Compressor Shaft Seal,This seal kit allows you to directly repair the original seals on some vehicle applications, and provides accessory assistance for the daily maintenance and updates of the vehicle, with high adaptability..
  • 【Standard Specifications】A/C Compressor Shaft Seal Kit,Manufactured in accordance with standard specifications, strictly in accordance with the factory quality control, and its performance is stable after multiple tests after installation..
  • 【Easy installation】Automotive A/C Compressor Oil Seal,The accessory installation method is simple, disassemble the original worn-out parts and re-install it, no complicated operation is required, and it is easy to use..
Check Stock

Carlisle Standard Polyethylene Clad Aluminum Canoe Paddle with T-Grip (Black, 54-Inch)

  • Blade Material: High-Impact Polypropylene.
  • Shaft Material: Vinyl Clad Tempered Aluminum with High-Impact Polypropylene T-Grip Handle.
  • Colors Available: Black, Green, Red, Yellow, Olive, and Yellow blade & Grip with Blue shaft.
  • Lengths Available: (in.) 51, 54, 57, 60, 63, 66.
Check Stock

Stainless Steel Shaft, Linear Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the parts are more evenly stressed, and the efficiency of the driving force is enhanced..
  • APPLICABLE MATCHING - Circlip groove hexagonal shaft has the advantages of round shaft and hexagonal shaft, and can be used with different hexagonal hole matching robot parts..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wearproof, durable, long service life, stable performance, to meet your different needs..
  • COMPATIBLE WITH - Can pass through bearings with an inner diameter of 8mm, used in conjunction with robot parts matching hexagonal holes, to enhance load carrying capacity and transmission capacity..
  • THREAD - The hexagonal shaft with spring groove and thread is convenient to limit the axial movement of the bearing in the combination, effectively improving the work efficiency..
Check Stock

G4Free Golf Bag Umbrella for Club Protection Flex Umbrella (Black)

  • 360° Direction Canopy. Convenient flex spring top in shaft allowing the canopy pivot in any angle to easily access your golf club and quickly pullback for protection..
  • Protect Your Clubs. This golf bag umbrella protects clubs in the golf bag against inclement weather. Durable 210T Pongee material with deep canopy design. The top protective inner liner protects your golf clubs from scratching the umbrella frame..
  • Telescopic Umbrella Shaft. Multiple locking sections in the shaft to adjust the shaft to 3 different lengths. Extended max length is 54.3 inch and retract to 45.6 inch. Folded to 36.2 inch for easy storage in golf bag side pockets. Come with an umbrella cover to protect the umbrella canopy..
  • Water Resistant Fabric. Lightweight as 0.7lb. The material of this golf club umbrella is made of water resistant 210T pongee fabric, thick metal shaft, tough fiberglass ribs and molding-in-one tips, making it windproof in the rainy days and hard condition..
  • Ergonomic Rubberized Handle. Classic and elegant looking, sure-grip rubberized material is the best choice for golfer. We will stand for the quality of this umbrella and we provide 12 months warranty on it..
Check Stock

uxcell 4mm Drive Shaft, L250mm Shaft, L200mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • The material OF SHAFT - stainless steel..
  • SIZE - suit for motor shaft diameter: 3.17 mm.
  • drive shaft size: 250 x 4 mm (length*diameter).
  • shaft sleeve size: 200 x 9.5 mm (length*outer diameter).
  • NOTE - there are bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in a whirl..
  • APPLICATION - compatible with DIY model..
  • PACKAGE CONTENT - 1 x Drive shaft assemble kit..
Check Stock

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

Rudedog USA 5003 Lock Collar with Grommet Kit. For 3/4\ Hex Bar only

  • Used for shaft fixing and positioning, SBR linear rail stopper, for DIY CNC Routers Lathes Machine..
  • Design fully engages the shaft. Easily installed.
  • High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong..
  • The shaft can be clamp-on tightly by set screw, the shaft will not be damaged.
Check Stock

Sutemribor Diameter 2-10mm Aluminum Round Rods Bar for Knife Handle Material, Bolsters, Metal Craft & Metal Working Hobbies DIY Craft, 20PCS

  • √ Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm.
  • √ Package: 8 sizes for each material, 20pcs in total.
  • √ Wide Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars and DIY craft making.
Check Stock

1/12 CVD Rear Drive Shaft Metal Vehicle Parts Compatible with WLtoys 12428 12423 RC Model Car Accessory ( Blue)

  • 【Fit for】The RC drive shaft is special designed for WLtoys 12428 12423 1/12 RC car model..
  • 【Metal Material】The RC drive shaft adopt quality metal material fine manufacturing, achieve maximum durability..
  • 【Exquisite Workmanship】The RC drive shaft has exquisite workmanship, is used for enhancing remote control car performance..
  • 【Different Color】There are several colors available, it can maintain you different needs..
  • 【Great Accessory】The RC drive shaft is high precision, wonderful accessory for the old broken one..
Check Stock

0.040\ x 24\ x 24\

  • Product type: High quality aluminum solid round rod lathe bar stock assorted.
  • Material: High hardness aluminum, corrosion-resistant, sturdy and durable.
  • Diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
  • Feature: The surface is smooth, easy to shape, no cracks formed.
  • Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
Check Stock

K&S Precision Metals 5078 Bendable Brass Strips.032\ X 1/4 & 1/2 X 12\ Long, 3 Pieces per Pack, Made in The USA

  • 1. Materials included: Brass, stainless steel, aluminum.
  • 2. Diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
  • 3. Package: 1pc for each size, 7 sizes for each material, 21pcs in total, stored in a transparent box.
  • 4. Feature: Good material for DIY craft making, sturdy and durable.
  • 5. Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
Check Stock

Utoolmart K10 Tungsten Steel Lathe Round Rod Solid Shaft Bar 6mm Dia 100mm Length 1Pcs

  • 【Dimension】-Material: K10 Tungsten Steel.
  • HRC: 50.Size: 6mm x 100mm / 0.24" x 3.94"(D*L)..
  • 【Material】-K10 Tungsten Steel, strong rust-resistant and corrosion-resistant, sturdy and durable..
  • 【Advantage】-The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily..
  • 【Application】-Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars..
  • 【Note】-Please add some oil during storage and reduce contact with air or do not expose to air for rust protection..
Check Stock