Reviews Counter Shaft

NEW 5HP COMPRESSOR DUTY ELECTRIC MOTOR, 56HZ FRAME, 3450 RPM, 7/8\ SHAFT DIAMETER, NEMA RATED MOTOR

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

All Balls Racing 25-4039 Countershaft Seal Kit

  • Specs: Counter Shaft Seal Kit, Kit includes case hardened bushing, replacement outer seal along with any O-rings, snap rings or lock washers required tcomplete the repair..
  • Meets or Exceeds OEM Specs for Fit and Performance.
  • Compatible With/Replacement For: Kawasaki KFX250 Mojave 1987 - 2004, KL650 A (KLR) 1997 - 2007, KL650 E (KLR) 2008 - 2014, KLX650R 1993 - 1996.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Counter Shaft Seal Kit built to meet OEM specifications.
Check Stock

Zreneyfex Trimmer Head for Echo GT-225 GT-230 GT-2400 99944200908 Speed Feed 400 Bump

  • Fits Echo SRM Trimmers GT-225 GT-230 GT-2400 GT-100 GT-140 GT-160 GT-200 GT-225i GT-251 GT-1000 GT-1100 GT-2000 GT-2100 GT-2101 GT-2102.
  • Specification: The diameter is 4in, and the thread is 10 x 1.25mm..
  • This trimmer head is left-handed/counter-clockwise threaded for SRM models which are straight-shaft trimmers (their heads turn counter-clockwise). It can not fit curved-shaft trimmers (their heads turn clockwise)..
  • Package included: 1 x trimmer head + 2 eyelets..
  • Two Years Hassle-Free Warranty. 100% brand new and high quality guaranteed..
Check Stock

3pcs/Pack Brass Mini Ball Valve Shut Off Switch 1/4" NPT Male x 1/4 INCH NPT Female Rated to 600WOG for Water Air Compressor Etc

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

All Balls Racing 25-4001 Counter Shaft Seal Kit

  • Meets or Exceeds OEM Specs for Fit and Performance.
  • Compatible With/Replacement For: Husaberg 390FE 2010-2011, 450FE 2009-2011, 450FX 2010-2011, 570FE 2009-2011, 570FS 2010-2011, FE250 2013, FE350 2013-2014, FE450 2014, FE501 2013-2014, Husqvarna FC 250 (EURO) 2015, FC 250 2014-2019, FC 350 2014-2019, FC 450 (EURO) 2015, FC 450 2014-2019, FC 450 Rockstar Edition 2018, FE 250 2014-2019, FE 350 2014-2019, FE 350S 2015-2016, FE 450 2014-2019, FE 501 2014-2019, FE 501S 2015-2016, FS 450 2018, FX 350 2017-2019, FX 450 2018-2019, TC 125 2014-2015.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Counter Shaft Seal Kit built to meet OEM specifications.
Check Stock

Hydraulic Gear Pump Sizes from 0 to 18 gpm 3625psi SAE A Flange Side Ports CCW-Rotation, PFEG Series (Shaft: 3/4\ Diameter keyed, 12cc: 9gpm at max. RPM)

  • IMPORTANT: SHAFT MUST ROTATE COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE..
Check Stock

Cody James Men's Stockman Cowboy Boot Broad Square Toe Brown

  • Premium Full-Grain Leather Foot And Shaft.
Check Stock

Dixon Valve GL347 2 1/2\ Face 0-400 PSI Lower Mount Gauge, (Box of 10)

  • Application in textiles, machinery, winding hill, printing, large stamping, conveyor packaging.
  • 5 digit pull counter is used to accumulate the number of times of the recording instrument or mechanical reciprocating movement.
  • Connect the auxiliary shaft of the counter pulls the arm to instrument or machine for pulling counting.
  • The digital display directly, with a rotating return to zero device. After returning to zero, it can start counting from zero.
  • Easy to operate, and count accurately, is practical counter tool..
Check Stock

Flagg-Air 340HT-J Septic Aerator – Jet Replacement

  • Economical and reliable replacement comparable to Jet Aerator. 12" mounting bracket designed to fit 10" tank riser opening..
  • Motor is fully enclosed - Rated for continuous duty - Oversized, pre-lubricated and sealed bearings.
  • High quality stainless steel shaft - Corrosion resistant bronze counter shaft.
  • Meets or exceeds all specifications of the OEM product.
Check Stock

5 HP 3450 RPM, 56 Frame, 230V, 22Amp, 7/8\ Shaft, Single Phase NEMA Air Compressor Motor - EM-05

  • Single phase, Full Load amps: 22Amp, 230V.
  • Frame Type: 56HZ, 7/8" Keyed shaft, Shaft length:2 3/8".
  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY.
Check Stock

2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8\ Shaft, Single Phase NEMA Air Compressor Motor - EM-02

  • Single phase Full Load amps: 15/7.5Amp, 120/240V.
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16".
  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY.
Check Stock

NEW 2 HP SPL Compressor Duty Electric Motor, 3450 RPM, 56 Frame, 5/8\ Shaft Diameter,120/240 VOLT

  • 2 HP SPL COMPRESSOR DUTY ELECTRIC MOTOR, ODP (OPEN DRIP PROOF) FOR DRY INDOOR ENVIRONMENTS.
  • 1 PHASE, 56 FRAME, 3450 RPM, 120V/240VAC, 5/8" SHAFT DIAMETER.
  • CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR.
  • Amperage: (7.5 FLA @ 240V) (15 FLA AT 120V), Voltage: 120V/240V (NOT SUITED FOR 208V INCOMING).
  • CCW (COUNTER CLOCKWISE ROTATION) WHEN VIEWED FROM SHAFT END. MODEL: 56S34D2M EMZ BRAND AND EMZ INDUSTRIES INC.
Check Stock

Blender Replacement Parts for Magic Bullet, Compatible with 250W Magic Bullet Blender (MB gear)

  • ⚙️ [COMPATIBLE MODEL] The replacement accessories for Magic Bullet is ONLY compatible with 250W Magic Bullet Blender (MB1001 Series), Does NOT fit Mini Magic Bullet or Baby Bullet..
  • ️ [EASY TO INSTALL] 1. Take a towel, with a towel wrap blade with his left hand holding.2. Right hand holding the connecting shaft, connecting shaft rotate clockwise to fall.3. When installing counter-clockwise to tighten..
  • [PACKAGE INCLUDE] 2 Blender Base Gears + 2 Blender Blade Gears + 4 Gaskets. Without any risk shopping with us. If you have any question, we will help you within 24 hours..
Check Stock