Reviews Self tapping Nut

Glarks 120Pcs #8 x 1-1/2\ Phillips Modified Truss Head Wood Screws, Blue Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 1-1/2" modified truss head wood screws. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, blue zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Rexka 10 Sets Engine Splash Shield Screws for Ford - T30 Torx Head Bolts and Grommets for Undertray Engine Fender Liner Deflector Grille for Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln

  • Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat....
  • Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield....
  • Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut,....
  • Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus....
  • 10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm.
  • 10 pcs of Screw Grommet,Light Green Nylon.
Check Stock

CONFAST 1/4 x 4 Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry Block or Brick 100 per Box

  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • SLOTTED HEX HEAD-Can be driven with a nut driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

CONFAST 1/4 x 5 Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry Block or Brick 100 per Box

  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • SLOTTED HEX HEAD-Can be driven with a nut driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

E-Z Lok Externally Threaded Insert 303 Stainless Steel 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 316 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

CONFAST 1/4 x 3-1/4 Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry Block or Brick 100 per Box

  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • SLOTTED HEX HEAD-Can be driven with a nut driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

NEIKO 10068A Nut Driver Set, For Impact Drill and Driver, 20 Piece, 1/4” Hex Small Nut Driver Bit Set, Metric and Standard, 4-12 mm & 5/32”-1/2”, CR-V Steel, Nutsetter Driver Bits

  • PREMIUM NUT DRIVER SET: Each impact driver bit set is constructed of forged heat-treated chrome vanadium steel for high torque output and can be used as a nut driver set for impact drill or driver..
  • POWER NUT DRIVERS: The drill sockets in this drill bit socket set are power tool accessories designed to fasten bolts, and self-tapping screws, and come in a 6-point socket orientation..
  • QUICK-CHANGE: Each 1/4” hex shank nut driver can be used with a variety of quick-change chucks, and drills..
  • INCLUDES NUT DRIVER SET IN CASE: The plastic organizers store and carry around the 20 nut drivers and are compact, so you can keep them in your tool bag or toolbox easily..
  • NUT DRIVER, METRIC AND SAE SIZES: Metric: 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm. Standard: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 Inch..
Check Stock

CONFAST 1/4" x 1-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)

  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • SLOTTED HEX HEAD-Can be driven with a nut driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

JINHONGRUI License Plate Screw Bolt- Stainless Steel Car Tag Fastener with Skull Cap Covers, Rustproof Decorative Ghost Head Logo Front Rear Frame Mounting Hardware

  • LICENSE PLATE SCREW ASSORTMENT KIT- This license plate mounting hardware kit contains 4 different types and sizes of screws and bolts: M6*10mm short bolts, M6*25mm extended long phillips bolts, M6*20mm self-tapping screws, and M6*20 anti -theft mechanical bolts. Bulk screws with nylon plug-in or metal lock nut, meet the needs of front and rear license plate mount.
  • PERSONALIZED SKULL SCREW CAP COVER- The black license plate screw cap with ghost head logo, each skull sticker is printed on high quality automotive grade vinyl gel with high resolution graphics, is a very cool decorative car accessory for motorcycles, cars, trucks, trailers..
  • RUSTPROOF STAINLESS CAR TAG BOLTS- Using 304 stainless steel, this is one of the materials with highest rust and corrosion resistance. The silver chrome screws are uncoated, keep the license plate cool, clean and tidy. Including self-tapping screws, machine bolts, insert retainer and nut, complete license plate fasteners can easy fasten the tag plate frame cover..
  • ANTI-THEFT, RATTLE PROOF- 4 pcs Hexagon socket head anti-theft metric bolts with the special screwdriver, security screws can keep the thief away from your car. The black foam license plate pad is pasted on the back of the metal license plate, can reduce the vi....
Check Stock

E-Z LOK - 653-6 E-Z Lok Externally Threaded Insert 303 Stainless Steel/Metric M6-1.0 Internal Threads 3/8 -16 External Threads 10.31mm Length Made in US Pack of 5

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 303 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/4\-20 Internal Threads, 7/16\-14 External Threads, 0.437\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z LOK - 650-10 E-Z Lok Externally Threaded Insert C12L14 Carbon Steel M10-1.5 Internal Threads 9/16 -12 External Threads 13.08mm Length Made in US Pack of 10

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock