Reviews Self tapping Mounting Bolt

Craftsman LT1000 MOWERS Rebuild KIT 130794 134149 144959 153535 for Husqvarna Yard, Garden & Outdoor Living,Lawnmowers

  • (2) 130794 Complete Deck Spindle Assemblies [3 BOLT MOUNT TYPE].
  • (6) Self Tapping Spindle Mounting Bolts,.
Check Stock

4 Pcs 6\ Door Security Slide Latch Lock, Barrel Bolt Heavy Duty Solid Stainless Steel 304, Thickened 1/8 inch, 9.7 oz/Pack, Brushed Nickle

  • Material: heavy duty premium solid stainless steel 304, brushed nickle surface finish.
  • Size: length 6"(152 mm), width 1 ½"(38 mm), thickness ⅛"(4 mm), thickened bolt core, diameter ⅜"(10 mm).
  • Weight: 9.7 oz(275 g)-single, 2.6 lb(1180 g)-4 pcs.
  • Self-Tapping Screws: M4-20mm, length ¾"(20 mm), diameter ¼"(4.5 mm).
  • 8 mounting holes, 32 pieces screws stainless steel 304, making the bolt sturdy, and the latch core is flexible, smooth.
Check Stock

Huouo 2 PCS Flagpole Cleat Hook 6 Inch Silver Cast Hardware for Flag Rope

  • Flagpole cleat length 6 inches, Distance between bolt centers is 1 inches, Specific dimensions look for picture 2.
  • Package includes 2 Pcs cleat and 4 Pcs self tapping flat head mounting screws.
  • Standard light duty zinc cast cleat, Durable and handle.
  • Easy to replace the broken one of flag pole and use for keeps the rope from blowing in the wind.
  • Great use for fastening rope to flagpole, small boats, awnings, tarps and more.
Check Stock

ARB 4x4 Accessories 170112 Differential Axle Breather Kit for drivetrain differentials transmissions and transfer cases

  • The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements..
  • The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in....
  • The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge..
  • 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant.8mm tubing has been selected over the standard 6mm tubing to....
  • The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which....
Check Stock

Bundle-BougeRV 120W Portable Solar Panel with 1100Wh Portable Power Station 1200W with 23 Quart (22L) Car Refrigerator

  • 【MORE SUNLIGHT, MORE OUTPUT】Tilting design will get up to 50% more solar energy collection compared to horizontally mounted panels, which helps your solar panel to generate more power in different seasons for optimum performance..
  • 【SUITABLE ROOF】Adjustable solar panel mounting bracket is supported by solar panels of most brands, designed for off-grid solar systems and the max width of the solar panel is 41inch. It can be used on RV, flat roofs, MARINE, boats, ground, garages, motorhomes, or other flat surfaces..
  • 【EASY INSTALLATION】Quick assembly with stainless steel fasteners and precise hole placement. Only 4 steps are required to complete the installation of solar panels. We have a PDF version of the operation manual, you can ask us for the installation manual at any time..
  • 【DURABLE DESIGN】Made of rust-free aluminum alloy, Long-lasting and endure all climate condition, lightweight for portable design..
  • 【WHAT YOU CAN GET】Aluminum Mounting Rails*4，Aluminum Tilt Angle Bracket*2，Steel Knob Bolt*6，Steel Wing Nut*6，Steel Flange Nut*4，Steel Split Lock Washer*4，Steel Flat Washer*4，Steel Hex Bolt*4，Steel Self-tapping Screws*6，Plastic Retaining Ring*6..
Check Stock

Front License Plate Frame for Ford Bronco, Aluminum Alloy License Plate Mounting Bracket Holder for Ford License Plate Accessories 2021 2022 2023

  • 【Compatible With Ford Bronco】The front license plate cover is compatible with Ford bronco 2021 2022 w/HD Modular Bumper, If your car with plastic or capable bumper you need to drill 2 holes in the bumper and use 2 self tapping screws..
  • 【Easy to install】Direct bolt your license plate to the bracket and snap the holder in place. If your truck has a plastic or capable bumper, you will need to drill 2 holes and use 2 self-tapping screws..
  • 【Premiun material】This license plate bracket made of high-quality aluminum alloy. Different from other plastics on the market, it is not easy to bend. The durable black powder coating ensures that your license plate frame will not rust after years of use in various weather conditions..
  • 【Beautiful & Fashionable】Position the license plate under the steel bumperto that match the aesthetics of the bronco,make your car beautiful and fashionable.Custome design meets all states requiring the plate be 14” from the ground..
  • 【Package includes】1* heavy-duty bronco license plate Frame bracket,4pcs nuts and 4pcs bolts for mounting the license plate..
Check Stock

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

  • Brand New Southwest Speed Front Engine Mounting Kit that includes O.E. Replacement Front Engine Mounts, and Powder Coated Black Engine Mounting Brackets that fits 1955-1957 Chevy's with Small Block Chevy V-8 Engines (SWS # 400-6897) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components.
  • This Southwest Speed 1955-1957 Chevy front engine mounting kit mounts the Small Block Chevy engine in the correct location in 55-57 Tri-Five Chevy’s The front engine mounts includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on 55-57 Tri-Five Chevy's > This kit will do both sides, and includes everything pictured to restore the mounts back to new condition.
  • The Mounting brackets are Powder Coated Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
  • Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of t....
Check Stock

Partsam Rectangle 14x Amber/Red 4" Truck Boat Trailer Side Marker Indicator lights 8-LED Surface Mount

  • Package includes 14 Pieces (7Red+7Amber) Universal 4 Inch Led Side Marker Indicator Lights. NOTE: This marker lights set includes standard nut and bolt for anchoring, not self tapping screws(bot specs: 0.3cm diameter and 2.6CM long). You may need to drill new mounting holes all the way through, then use the bolt and nut to install.
  • 7 Pieces Red Led Marker Lights and 7 Pieces Amber Led Marker Lights.
  • Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts.
  • Each Clearance Light is built in 8 LEDs miro reflectors, provide you super night visability on the road.
  • HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE.
  • This Rectangle led trailer light is surface mount and you can mount anywhere as long as the size fit.
  • Usage: side marker lights, roof lights, corner lights, rear lights, identification lights fender lights,cab lights, clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time. If you use it as the front turn signal lights, it may not be that bright, thanks.
  • Application: Works on any 12V DC vehicles. Perfectly suitable for all kinds of trucks, Trailer, Semi-trailer, Lorry, Off-road vehicle, ATV, SUV, UTE, Pickup, Tractor, Bus, Car, Boat, Car....
Check Stock

Taylor Made Products 1162 Marine Turn Latch - Set of 2

  • Black thermoplastic comes with self-tapping screws (2 per pack).
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • ... 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember Is Not A Universal Fit Unit. | * This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas..
  • Kit Includes: Southwest Speed 1955-1957 Chevy Tri-5 Tubular Auto/Manual Transmission Crossmember (# 400-7084) | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion | * Southwest Speed Polyurethane Transmission Mount (# 400-7031) | * Black Performance Polyurethane | * Will Outlast Traditional Rubber Mounts | * Zinc Finish.
  • Crossmember Specs: | * Center Crossmember Overall Width: 32" | * Crossmember ....
Check Stock

LIBRA 10 x 2-1/4 Self-Adjusting Electric Trailer Brake Assembly 2 Pairs - 21004

  • Premium LIBRA 10" x 2-1/4" Self adjusting electric trailer brake assemblies (2 left + 2 right) for two axle.
  • works with most 3,500 lbs trailer axles in the market.
  • Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included.
  • Exchange with Dexter brake # 023-026-00/023-027-00.
  • Self adjusting, no need to manual adjust.
Check Stock

Craftsman Mtd 918-04822B Lawn Tractor Mandrel and Pulley Assembly Genuine Original Equipment Manufacturer Part

  • This part is compatible with models including.
  • 13AJ771S031,247289800,247288831,247288830,13AJ77SS099,13AN77SS099,CMXGRAM7368327,17AKCACS299,13AL78SS099,247290001,247290000,13A726JD099,247290003,247289010,247290002,247288840,247288843,13A726JD091,247288842,247288841,13A277SS099,13WX90AS056,769-05404,13AJ795S004,13WX791T031,247289020,13AN771S299,247203770,247203771,13B226JD099,316286040,247290005,247290004,17BKCACS099,13RX90AS056,13AO772S055,247286040,13BJ78SS099,17ADFACS093,13AX91AT056,247286720.
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including.
  • 618-04822,918-04822A,918-04822,918-04822A-0637,918-04889,618-04889,918-04889A,918-04950,618-04950.
  • Genuine Original Equipment Manufacturer part. Compatible Brands: Craftsman,Mtd.
  • Special details: The housing mounting holes for mandrel assembly 918-04822B aren't threaded.
  • order 4 of the self-tapping bolt part number 710-1260A separately to attach the mandrel to the tractor deck.
  • Mandrel and pulley assembly 918-04822B provides support for the pulley shaft and spins the blade on the mower deck of the lawn tractor.
Check Stock

E-Z Lok Externally Threaded Insert 303 Stainless Steel 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 316 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock