Reviews Screen Axis

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and....
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of....
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing..
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very....
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and....
Check Stock

UJIKHSD 6CH RC Helicopter Brushless Motor RC Drone Single Propeller Without Ailerons 6-axis Gyro Stabilization RC Airplane Altitude Hold Girls Adults Remote Control Helicopter

  • ✈ 3D and 6G (compatible with electronic 3-axis gyroscope and 6-axis gyroscope at the same time) mode integrated remote control can be freely....
  • ✈ 3D mode uses a 3-axis gyroscope, which is very responsive. Can do aerobatics, can easily do rolls, inverted flying, hurricanes, pendulums and....
  • ✈ The 6G mode uses a 6-axis gyroscope, and the flight is stable, especially suitable for beginners to fly..
  • ✈ 6-channel remote control, with 3D stunt IDLE switch, throttle hold TH.HOLD switch, large-screen LCD display, low voltage alarm and other....
  • ✈ There is a special setting for the hovering midpoint of the aircraft. Enter the setting mode to set the hovering point of the aircraft according....
Check Stock

Digi-Pas 2-AXIS ULTRA-Precision Digital Level 1-acrsec (0.005mm/M), Inclinometer, DWL8500XY + PRO Software (NIST-Traceable)

  • Digi-Pas 2-AXIS, ULTRA-Precision, Wireless, Digital Level/Inclinometer, REVOLUTIONIZE precision alignments by SIMULTANEOUSLY display both X&Y axis level states WIRELESSLY on your Smartphone, Tablet and PC screen while you are adjusting machine footings. This allows with ONE-MAN operation, thus completely eliminates using 2 units of single-axis levels, with TWO-MEN operation as experienced on Old-fashioned Spirit level or single-axis inclinometer..
  • Tedious repetition on going ‘back-and-forth’ checking 'bubble' level position in-between tiny graduation lines is NOW THINGS OF THE PAST. Digi-Pas SMART LEVEL greatly CUT-DOWN precision alignment TIME (by >70%) and in combine with one-man operability allow GREAT COST SAVING as well as improve QUALITY of installation, setup & maintenance of large-sized CNC machines, XY-Table Ball-Screw STRAIGHTNESS & SURFACE FLATNESS and equipment requiring delicate alignments or sensitive to vibration..
  • Real-time MONITORING and LOGGING (save in Excel) on leveling states, planar angles, 3D straightness/surface-flatness profiling and VIBRATION amplitudes. ANALYSIS on both static & dynamic positional stability....
Check Stock

3 Axis DRO Digital Readout for Milling Machine Lathe Machine 3pcs Magnetic Scale 5um IP67 Sealing Protection (3pcs Customized Magnetic Scale)

  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
  • High Quality-34 bit core chip, 64M running memory, possess high integration, strong anti interference ability、Imported chips, faster data processing.，Mean Well Power long life time ,.
  • The 3 Axis digital readout display meter system is equipped with a variety of intelligent functions:MM/INCH, SDM 200 sets memory, bevel processing, power-off memory, circumference drilling, oblique line drilling, 1/2 centering,Axis sunmming functuon etc. Extra RPM function,Also a calculator is equipped for more convenient usage.
  • Order Details : 3Axis LCD DRO + RPM+ Hall Sensor + 3pcs Magnetic Scale +USA plug + Bracket + Screw+ User manual.
Check Stock

2 Axis DRO Digital Readout LCD Display Magnetic Sccale DRO 1um 320MM(12")+5um 920MM(36") Lathe Machine

  • Order Details : 2Axis LCD DRO + 2pcs Magnetic Scale +USA plug + Bracket + Screw+ User manual.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
  • High Quality-34 bit core chip, 64M running memory, possess high integration, strong anti interference ability、Imported chips, faster data processing.，Mean Well Power long life time ,.
  • Magnetic Scale-Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class.
  • The 2 Axis digital readout display meter system is equipped with a variety of intelligent functions:MM/INCH, SDM 200 sets memory, bevel processing, power-off memory, circumference drilling, oblique line drilling, 1/2 centering,Axis sunmming functuon etc. Extra RPM function,Also a calculator is equipped for more convenient usage.
Check Stock

Panasonic LUMIX GX9 4K Mirrorless ILC Camera Body with 12-60mm F3.5-5.6 Power O.I.S. Lens, DC-GX9MK (USA Black)

  • 20.3 MP high resolution MOS Sensor with Tuned 3 Dimensional Color Control to detect hue, saturation and brightness for optimal results.
  • 5 Axis Dual I.S. combines an O.I.S. (Optical Image Stabilizer, 2 axis) and an I.B.I.S. (In Body Image Stabilization, 5 axis).
  • 5 axis Dual I.S. enables up to 4 stop slower shutter speeds.
  • Live View Finder 2760k dot high resolution LFV tilts up by approx. 80 degrees with nearly 100% color reproduction.
  • 1. 39x / 0. 7x (35mm camera equiv.) magnification and 100% field of view.
  • 49 Focus Points plus Custom Multi AF mode quickly and freely select focus blocks from via the touch enabled LCD screen.
  • [4K Technology] 4K 30p video, 4K Live Crop and 4K PHOTO burst with a new Light Composition mode to capture perfect moments.
Check Stock

XK K110S 6CH Brushless 3D6G System RC Helicopter RTF Mode 2 Compatible with FUTABA S-FHSS

  • Without aileron design, the blades are designed with aerodynamic principles to provide strong power and body self-stability..
  • The use of 1106 external rotation brushless motor is more powerful, 3.7v 450mah 25c large-rate battery.Set 3D and 6G (compatible with electronic 3-axis gyroscope and 6-axis gyroscope at the same time), the integrated remote control can be switched freely..
  • The 3D mode uses a 3-axis gyroscope, which is responsive. Can do aerobatics, can easily make roll, inverted flight, hurricane, pendulum and other actions.The 6G mode uses a 6-axis gyroscope, and the flight is stable, especially suitable for beginners to fly..
  • 6-channel remote control, with 3D special effects IDLE switch, throttle hold TH.HOLD switch, large-screen LCD display, low voltage alarm and other functions. Specially set the hovering point of the aircraft, enter the setting mode to set the hover point of the aircraft according to your needs..
  • Equipped with a dedicated USB charger, which can charge 2 batteries at the same time..
Check Stock

Zhiyun Crane 2S 3-Axis Handheld Gimbal Stabilizer for DSLR Cameras

  • Upgraded Algorithm. Dynamic Stabilization: Highly optimized in motor control algorithms and motor power, CRANE 2S handles large cameras such as the BMPCC 6K, Panasonic S1H, EOS 1DX Mark III in total ease. More than that, you can also mount multiple accessories on it..
  • Stay Focused All the Way: Together with TransMount Image Transmission System, fous pullers will be able to focus and zoom while live monitoring the shots. Even more, they will also be able to change gimbal parameters and modes if needed..
  • Bigger Screen to Boost Your Productivity: The new 0.96″ OLED screen offers a bigger vision. With it, you will be able to go through the entire menu within seconds and switch between different modes swiftly..
  • Axis Locking Mechanism 2.0: The upgraded axis locking mechanism 2.0 adopts a two-phase locking design that guarantees zero swinging of the gimbal during traveling or storage..
  • Say Hi to Buttery Smooth Movement: Six gimbal modes, from basic to advanced, are all easily accessible on CRANE 2S: Pan Following, Locking, Following, Full-Range POV, Vortex, Go mode..
Check Stock

Creality Sermoon D1 3D Printer Silent Motherboard Double Z-axis Sheet Metal Base 4.3-inch Touch Screen Large Printing Size 280 x 260 x 310mm

  • Silent Mainboard&Excellent Extrusion Kit: Sermoon D1 equipped with self-developed 32 bit silent mainboard, which makes it possible to enjoy your....
  • Industrial-grade Printing: Semi-closed chamber with sheet metal base features provides higher stability and a silent printing environment. Aluminum....
  • Double Z-axis: Sermoon D1 use the double Z-axis design concept. By using double z-axis, T-type double screw rod, V-wheel synchronous component and....
  • Convenient and smart: Sermoon D1 is endowed with 45 degree installed 4.3-inch Color Touch Screen, which makes it easy to view and operation. The....
  • What you will get: A Ceality Sermoon D1 3D printer which combines perfect fusion of modern aesthetics and technological, lifetime technical....
Check Stock

Creality HALOT ONE Resin 3D Printer with 5.96 inches 2K Mono LCD Intergral Light Source and Fast Printing Precise Z-axis Module and WiFi Control Assembled Out of The Box

  • INTEGRAL LIGHT SOURCE-This Creality resin printer uses new generation optical system, which adopts the light principle of reflection+refraction.....
  • HIGH PERFORMANCE MAINBOARD-Self-developed new generation mainboard boasts a main control chip equipped with the ARMcortex-M4 processor to embrace a....
  • FAST PRINTING AND PRECISE RESULTS-Creality SLA Printer is equipped with a 5.96 inches monochrome LCD of 2K HD 2560x1620 resolution, only taking....
  • 5" DIGITAL HD TOUCH SCREEN-The 3d resin printer HALOT ONE is equipped with 5 inches brand new touch screen with simple interface for easy....
  • PRECISE Z-AXIS MODULE-The Z-axis of 3d printers resin is designed to have linear rails and T-shape screw rod. Steadiness enables super smooth....
Check Stock

FeiyuTech AK2000s Gimbal Camera Handheld Stabilizer with Versatile Handle LCDscreen for DSLR Camera Sony a6300 a6400 a6500 Canon M50 EOS Panasonic Nikon Fujifilm(Advanced Version),Official-Authorized

  • 【Max Payload 4.85lb】 easily compatible with SONY A9 A7 Canon EOS R, M50, M6 Panasonic GH4 GH5 GH5S Nikon DSLR/Mirrorless cameras..
  • 【Detachable Versatile Handles】 two way to held , switch between single handle and underslung position,which makes it can be touch different shooting scenes..
  • 【Touch Screen Display】: It is pretty straight-forward to get information from OLED screen..
  • 【3 Axis Motor-lock Design】: Each axis is equipped with physical motors locks,makes the balance more convenience,and easy to pack..
  • 【Quickly charge,long battery life】: AK2000S has a USB C quick charging port,only need 1.5 hours to fully charge it. 7 hours for normal working state,14 hours for standby mode..
Check Stock

Napoleon Dynamite Wig and Glasses Kit

  • ...ulators, supporting multiple style interface switching, and supporting key mapping.
  • Convenient and easy to use, it supports multiple ways to play/add new games, collect and search, or other convenient operations..
  • 【4500 mAh Li-polymer Battery and 4.0 INCH IPS Multi-touch Screen】You can use RG405M for 8 hours, support fast charging with Type-C cable, it has 4.95-inch OLED touch screen with 960*544 screen resolution and more saturated colors! RG405M supports PSP point to point 2X resolution with integrated touch full lamination technology for more sensitive touch!.
  • 【Upgrade Unisoc Tiger T618 Chip 】 The Unisoc Tiger T618 64-bit cota-core 2 core A75+6 core A55 at up to 2.0GHZ gives the RG405M low power consumption and high performance. the RG405M's memory is 128GB high-speed eMMC 5.1 HS400, the more memory running, the faster the system response time..
Check Stock

Etpark PS4 Wired Controller, 6.5ft USB Cable wired Gamepad Compatible for Playstation 4/pro/Slim/PC(Blue-Wired)

  • The Controller is specially designed for PStation 4 console, adapting Dual Shock 4 wired controller program, it's a perfect replacement for Original PS-4 gampad with much less cost..
  • In addition to induce tilt angle of the controller, it can also capture the 3 axis acceleration information of three-dimensional space X、Y、Z, and transmit all information captured to the game system quickly. With this function,players can use this PS-4 controller to operate special games..
  • It’s equipped with latest motion sensing technology, built-in three-axis gyroscope and three-axis accelerator. With the three features, it can detect omnidirectional dynamic information including Roll, Pitch and Yaw..
  • It’s also featured with a new function: dual-point capacitive sensing touch pad on the front of the controller. The share button makes social interactions easy with instant gameplay video and screen uploads..
  • Note: The central button is a tactical button and not a touch sensitive pad. The controller does not have MIC and Audio Jack function, headsets are not supported. The controller is dedicated to PS-4 and PC(Windows 7/8/XP,Windows 10 system may be incompatible)..
Check Stock