Reviews Roll Bar Winch Mount Plate

Smittybilt 76892 XRC Atlas Front Bumper for 2007-2018 Jeep Wrangler JK 2/4-Door

  • Innovative 4-piece design meets stringent international safety standards.
  • 3/16" cold rolled steel bumper with bolt-on skid plate and bull bar.
  • Lower design winch plate allows greater airflow.
  • Solid mount D-rings welded on the inside and out.
  • and marine grade stainless steel hardware.
Check Stock

TYT Winch Mounting Bracket, Heavy Duty Right Angle Mounting Winch Bracket, Heavy Duty Winch Mount Plate for 600lbs to 3500lbs Trailer Winch Mount（Black)

  • ▶Super Design: The winch mount is suitable for 600lbs to 3500lbs hand winches.This winch mounting bracket is constructed of high quality steel.The hand winch mounting plate has a tough spray coating finish for supreme durability and can prevent rust..
  • ▶Great Idea: Winch mounting plate to help your hand winch to mount available on the ground or on the wall, perfect for boat trailer, trucks, ATV..
  • ▶Easy To Install: Just mount this plate on the ground or wall tightly and then mount your winch on another side of this plate..
  • ▶Pay Attention: Please make sure your winch and plate tight and safe no matter where you are going to install..
  • ▶100% Satisfaction Guarantee: We'll refund your money if you are not 100% satisfied with this product, Please feel free to contact us if you have any questions, we will provide a perfect solution for you..
Check Stock

Front Winch Bumper Compatible with Toyota 2016-2022 Tacoma Guard Bull Bar W/Winch Mount 4×4 Front Bumper

  • Front Winch Bumper guard compatible with 4×4 2016 2017-2022 Toyota Tacoma. Precision designed to match your vehicle’s body lines.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions, front winch bumper guard come prepped with powder coated. Rust protection. Built to strict quality control standards.
  • 3/16″ Plate Front Bumper with 1/4″ Winch Mount,10,000 lb winch capacity (winch not included)..
  • Heavy duty mounting / recovery points that accommodate D-Ring shackles (Shackles not included). Fits 20″ LED dual row LED light bar (light bar not included).
  • Requires trimming of front bumper,easy bolt-on. No cutting and no drilling. Instruction is included. Material:Steel.
Check Stock

Winch Hitch Cradle Mount Plate, DACK Universal Receiver 10 x 4 1/2 Winch Mounting with 2''Receiver Hitch for Recovery Winches Heavy-Duty 15000Lbs Capacity for ATV UTV Truck

  • 【Heavy Duty Steel Construction】The load-bearing plate of DACK Winch Hitch Cradle Mount Plate is made of 5mm thick cold-rolled plate, and has a high-density, durable black powder coating to ensure that it will not rust when placed outdoors for a long time..
  • 【15000Lbs Large Capacity】This winch hitch mount weighing up to 5kg, easily tow your vehicle and ensure absolute safety..
  • 【Universal Winch Mount】Pre-drilled winch mount fits most winches, Package includes hitch pin and clip, as well as 10" on center fairlead bolt pattern and 10" x 4 1/2" standard winch mount pattern ensure the installation is more convenient..
  • 【Suitable for Most Vehicles】: The standard universal size ensures that the mounting plate is suitable for any four-wheel drive vehicle: truck, ATV, 4x4, trailer, etc. Suitable for standard 2 inch receiver..
  • 【WORRY-FREE VOUCHSAFING】DACK Winch Hitch Cradle Mount comes with Lifetime support and the hardware is rigorously tested before shipment. If you have any questions about the product installation, please feel free to contact us and we will....
Check Stock

Body Armor TR-19339 2014-2021 Toyota 4 Runner Hiline Front Winch Bumper

  • High Clearance Design That Accomodates Factory Trd Skid Plate.
  • Removable Bull Bar To Accommodate 2020 Models With Safety Sense.
Check Stock

ELITEWILL 2\ Receiver Universal Trailer Hitch Winch Mount Plate for ATV UTV Winch Cradle Mounting Bracket

  • Standard Fit:The winch mount is equipped with a standard 2-inch shank to fit fits all 2" trailer hitch receiver..
  • Universal Winch Mount:This receiver allows you using a trailer hitch to attach a winch to your ATV or UTV.And pre-drilled winch mount fits most winches,it can be installed as needed..
  • Front Or Rear Mounted:This trailer hitch can be mounted on the front or rear of the ATV or UTV, wherever a standard 2-inch receiver is properly installed..
  • Protect Your Winch:Winch mount black powder coating can protect the winch mount from sun and rain..
  • Durable Construction:This winch mounting plate is made of heavy duty steel that can make it durable and suitable for longer..
Check Stock

VONLX Universal Trailer Hitch Winch Mounting Plate with 2" Receiver, Winch Bracket Winch Mounting Plate Fit for ATVs, UTVs, Lawn and Garden Equipment Winch Bracket Mounting Bracket

  • [Winch Mounting Bracket] Universal winch mount provides a stable mounting position for your winch. Suitable for a variety of applications: ATVs, UTVs, lawn and garden equipment, etc..
  • [Features] The winch mount comes with a standard 2" shank to fit all 2" trailer hitch receivers..
  • [Material] Made of high-quality heavy-duty steel, the surface of the winch mounting plate is sprayed with a durable black powder coating, our winch mounting plate is not easy to rust, anti-corrosion, and durable..
  • [Strong and Durable] The durable construction of this winch mounting plate ensures its long service life. Protect your winch from rock damage and debris collisions as you hit off-road trails. Universal winch mounts hold between 1,300 and 16,500 lbs..
  • [Easy to Install] This trailer hitch attachment can be installed on the front or rear of the vehicle. Installation is simple and convenient..
Check Stock

SuperATV Heavy Duty Winch Mounting Plate for 2021+ Polaris RZR Trail 900 / S 900 / S 1000 | 3/16\ Steel Plating | UV-Resistant Powder Coating | Compatible With Many OEM and Aftermarket Winches!

  • ✔️【 Fits】2021+ Polaris RZR Trail 900 / Trail S 900 / Trail S 1000 | Designed to work with SuperATV’s Black Ops Winches | Please Note: This Polaris Winch Mount has dual mounting bolt patterns for the majority of aftermarket 3500–6000 lb. winches..
  • 【Machine Specific Mounting Plate】Made with 3/16” heavy-duty steel plating | UV-Resistant wrinkle black powder coating prevents corrosion | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern: 5.98” (152mm) 4.29” (109mm) | Strength you can count on!.
  • 【Strong and Dependable】Do you need the best Polaris RZR Winch Mount in the industry? SuperATV's is laser cut, brake press bent, and powder coated to ensure years of use. And it’s not just ultra strong—it’s also super simple to install. We include everything you need to have it on your machine in no time..
  • 【Winch Out With Ease】Both at work and at play, you don’t hold back on your Polaris RZR Trail! SuperATV’s RZR Winch Plate ....
Check Stock

TYT 3500 lb Advanced Load ATV/UTV Synthetic Rope Winch Kits, 12V Elelctric Winch with 2 Wireless Remotes and Winch Mounting Plate, Waterproof IP67 Recovery Winch for ATV UTV Towing Off Road Winches

  • Winch Pure copper motor: TYT 3500 lbs (1587kg) Orange frosted winch with synthetic winch rope length 9M x Φ5.5mm, which is able to withstand abrasive terrain without fraying. 12V DC 1.5Hp permanent magnet series wound motor and three-stage planetary gear system with free spooling clutch.(Do Not overload for 3500lbs).
  • Stable Control: Low-amp, sliding ring gear, gear ratio- 153:1, including orange mount plate, bar mount rocker control, 2 x wireless remote control, 1 x set of stainless steel fitting bolts, hawse fairlead, heavy duty hook and 3500 lb portable electric atv utv winch..
  • Precision Winch Braking System: Braking action is automatically applied to the winch drum when the winch motor is stopped and there is a load on the winch cable.(The winch can cause short circuits if wiring is wrong, please read the instruction carefully).
  • High-Performance: Fast line speed, high sensitivity of remote control. Waterproof and sandproof, unique brake design, excellent control. And, when TYT electric winch works, the sound is within 65 decibels. The roller fairlead creates a safe and smooth pull with the dependable 49-feet galvanized ....
Check Stock

TYT 12V 3500 lb Electric ATV/UTV Winch, Off-Road Waterproof Steel Cable Winch for ATV UTV Towing Trailer Winch with 2 Wireless Remotes and Winch Mounting Plate(3500 lb Winch)

  • Winch Pure copper motor: TYT 3500 lbs (1587kg) Orange frosted winch with steel cable length 15M x Φ5.0mm, which is able to withstand abrasive terrain without fraying. 12V DC 1.5Hp permanent magnet series wound motor and three-stage planetary gear system with free spooling clutch.(Do Not overload for 3500lbs).
  • Stable Control: Low-amp, sliding ring gear, gear ratio- 153:1, including orange mount plate, bar mount rocker control, 2 x wireless remote control, 1 x set of stainless steel fitting bolts, 4-way roller fairlead, heavy duty hook and 3500 lb portable electric winch..
  • Precision Winch Braking System: Braking action is automatically applied to the winch drum when the winch motor is stopped and there is a load on the winch cable.(The winch can cause short circuits if wiring is wrong, please read the instruction carefully).
  • High-Performance: Fast line speed, high sensitivity of remote control. Waterproof and sandproof, unique brake design, excellent control. And, when TYT electric winch works, the sound is within 65 decibels. The roller fairlead creates a safe and smooth pull with the dependable 49-feet galvanized super-duty aircraft cable. No load traction drag speed is 10.8 ft/min, all load The 3500 lbs drag speed is 2.6 ft/min..
Check Stock

Ronghui Silverado Front Bumper with Winch Plate and LED Lights and D-Ring for 2015-2016-2017-2018-2019 Chevy Silverado 2500/3500

  • Suitable for 2015-2016-2017-2018-2019 Chevrolet Chevrolet 2500/3500 models..
  • Bumper is equipped with 1x144W LED Spotlight Bar and 2x20W LED Light + 2x18W LED aluminum lights + 2x4.75T D-ring..
  • Front bumper is equipped with two 9500-pound rated D-rings on a sturdy mount, and is equipped with a sturdy tube on the rider, and provides additional lighting. Includes black isolator and gasket. The front bumper has a built-in winch plate that can support a 12,000-pound winch..
  • Material: 5/32" steel and 2" x 0.120" seamless tubes for excellent strength and stiffness. The winch can withstand 12,000 pounds and the three-stage black powder coating on the front bumper of the winch is more durable and corrosion resistant..
  • Easy to install. No drilling or cutting is required. Install directly with screws..
Check Stock

CURT 31010 Trailer Hitch Winch Mount for 2-Inch Receiver

  • SECURE MOUNT. This hitch-mounted winch plate allows you to attach a winch to your vehicle, using your trailer hitch. The slotted holes accept most winches, and it can be installed as needed.
  • STANDARD FIT. This receiver hitch winch mount is equipped with a standard 2-inch shank to fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin sold separately).
  • FRONT OR REAR. This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.
  • SOLID STRENGTH. This hitch-mounted winch bracket is constructed from steel to provide dependable strength for tough jobs.
  • CORROSION-RESISTANT. For long-lasting protection against the elements, this hitch-mounted winch mount is shielded in a durable black powder coat finish.
Check Stock

KEEPER - 36” Winch Bar Chrome - Use with Bolt-On or Weld Style Deep Storage Winch

  • Winch Bar is designed to use with bolt-on or weld style deep storage winches to tighten the winch strap and release load binder.
  • Additional Features: Features a knurled non-slip handle and a tapered, angled grooved tip for a secured easy handling and operation.
  • Ease of Use: Winch bar has a tapered, angled end for easy operation.
  • Operation: Easily releases load binders and tension winches.
  • Compatibility: Compatible with Keeper model #04928 weld mount trailer winch and other standard weld mount trailer winches.
Check Stock