Reviews Robot Sd Card Module

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

• The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver..
• SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card)..
• 3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply..
• Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal....
• Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module....

Behringer X32 Digital Mixer Bundle

• X32 Digital Mixer: 40-input, 25-total-bus Digital Mixer with 32 Gain-Programmable Mic Preamps, 25 Motorized Faders, Virtual FX Rack, and 7" Color TFT.
• DN32-LIVE SD/SDHC and USB 2.0 Expansion Module: 32-channel SD/SDHC and USB 2.0 Expansion Module for Midas and Behringer Digital Consoles.
• SDHC Card 32 GB, Class 10: 32GB SDHC Card.
• Extreme PLUS microSDHC Card - 32GB, Class 10, U3, UHS-I: microSDHC Card with Class 10/UHS-I Video Compliance and 95 Mbit/s Maximum Transfer Speed - 32GB.

MP3 WMA Decoder Board Audio Wireless Bluetooth 4.2 Module 12V, USB/SD Card/Bluetooth/FM Switching Support

• [BLUETOOTH 4.2 SUPPORT]The mp3 module support Bluetooth 4.2. With blue backlight function, it support USB sound card function and Micro USB 5V power input. And also has power off memory function---memorize playing songs and volume before power off..
• [SUPPORT FOLDER SELECtION FROM secure digital memory card OR USB DISK ]The mp3 module support folder selection and then music playback (remote control operation or panel operation) from secure digital memory card or USB disk..
• [USB/SD CARD/BLUETOOTH/FM SWITCHING SUPPORT]The mp3 module support USB/SD card/Bluetooth/FM switching. Conversion prompt (Signal, Chinese, English voice prompt optional)..
• [MULTIPLE MUSIC FORMATS SUPPORT]The decoder supports MP3/WMA/WAV/lossless APE/FLAC format music. MP3 Songs: 2-320kbps, WAV/WMA: 1411kbps and below..
• [MULTI-FUNCTION SUPPORT]The mp3 module support secure digital memory card / USB flash switching, songs selection, volume adjustment, EQ, play /pause, stop, mute, shutdown, direct election song..

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

• ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
• ♛ The Display Module can support analog S P I and hardware S P I.
• ♛ The Display Module is designed with one socket for sd card.
• ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
• ♛ This is a new 2.8 inch serial S P I color display module without touch function.

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

• 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
• 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
• 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
• 【FAN Header】5V/12V, allows speed adjustment and measurement.
• 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.

LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa

• This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. Please note: With a SD Card base on back,SD card not included..
• You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card..
• All actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller..
• Print your 3D designs without PC, just with a g-code design stored on the SD card..
• LCD 12864 graphic smart display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking..

Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for Arduino UNO R3

• The module has built-in level adjustment circuit, which can realize level conversion between 5V and 3.3V microSD.
• Hardware connection: This microsd card is equipped with a level converter, which can not only connect 5v devices other than arduino, but also prevent the SD card from being damaged.

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

• 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
• 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
• 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
• 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
• 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
• 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

• ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
• ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
• ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
• ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
• ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.

Tiptop Audio ONE Eurorack Sample Player Module

1.44Inch TFT Display Module LCD Display Screen 128RGB x 128 Resolution Serial Peripheral Interface

• The display module is connected with other board via a serial peripheral interface. It is designed with one socket for sd card which makes it very convenient..
• The display model is a-TFT with a display size of 1.4in with the high quality driving IC chip ST7735S, the module works more stable..
• The lcd display screen is graphical 128RGBx128 dot . The LCD effective area is 25.5x26.5mm and the size of each pixel is 0.20x0.20..
• The lcd display screen is ideal for clear presentation of texts, graphics and images, with a large 1.8 inch sized screen and integrated SD card reader..
• We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Setting Up Your Daily Personal Newsletter

• ...argeable battery included, there is no need to buy extra batteries, which are eco-friendly..
• 【 Endless possibilities 】Neo robot kit uses CyberPi, which is the multifunction main board of this coding robot, the built-in ultrasonic sensor, obstacle sensors, buzzer sensor module, receiver & transmitter, and WIFI module, making the stem projects for kids ages 12-16 connect with the Internet and let children experience more about the Internet of Things (IoT). And for teachers' use, the wifi module makes multiple learning toys could be connected to do tasks together and simplifies the teaching by sharing the same programming simultaneously..
• 【More functions, more fun 】Besides the basic functions such as line-follow, obstacle-avoidance, and object follow, playability of ths robot car kit is greatly increased.
• this STEM toys can be controlled by voice, can hear, remember and speak. Voice commands are supported, e.g., move forward, dance, and the piano music module in the app can enlighten kids to play music. Microphone and scratch programming can implement the function of recording. Expand your imagination and creativity to create more ways to play with robotics....

Vilros Raspberry Pi Zero Compatible Multi Purpose Case-Clear Transparent

• Compatible With Raspberry Pi Zero, Zero W, Zero 2 W--(Enlarged HDMI port for full Pi Zero 2 Compatibility).
• Includes open & Closed GPIO Cover for all kinds of use.
• Removable SD card Cover allows SD port Access or Closed SD Port.