Reviews Rip Saw Blades

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

RIKON Power Tools 10-324 14\ Open Stand Bandsaw

  • Ball-Bearing Blade Guides - Upper and lower ball-bearing blade guides and thrust bearings reduce friction, increase blade life and contribute to the smooth operation of the machine during cuts.
  • Rack and Pinion Guide Post – Adjust the cutting depth easily with the turn of a knob. New inch scale helps set guide heights.
  • Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6" give added support of lumber being ripped or re-sawn.
  • Rear 115V Power Outlet – Handy electrical outlet for plugging in lights, radios, phone chargers and more.
  • Takes 111” Blades – Band saw accepts all styles of 111” long blades from 3/16” to 3/4” in width.
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)

  • ...ers with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5mm).
Check Stock

Café Listo 7 Oz 200g 100% Pure Authentic Instant Coffee From El Salvador

  • PRECISE RIP CUTS AND CROSSCUTS: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down..
  • REPEATABLE ACCURACY: The Bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time..
  • SAVE TIME: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every....
  • EASY SETUP: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time..
  • STABILITY: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts..
Check Stock

GALAX PRO Saw Blade Set, Pack of 4 Assorted 60T HSS Metal/24T TCT Wood/Diamond 4-1/2-Inch Circular Saw Blade with 3/8\ Arbor for Fast Cutting…

  • ...ers with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5mm).
Check Stock

BORA Rip Guide with Saw Plate + Rip Handle BORA Cutting System Rip Guide for Circular Saws 544008

  • PRECISE RIP CUTS AND CROSSCUTS: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down..
  • REPEATABLE ACCURACY: The Bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time..
  • SAVE TIME: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every....
  • EASY SETUP: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time..
  • STABILITY: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts..
Check Stock

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

  • PATENTED PUSHBLOCK MAKES NARROW RIP CUTS ON THE TABLE SAW SAFER AND EASIER TO CONTROL- Make your table saw rip cuts down to a 1/4" wide smooth, easy, and safe! The Delmar Tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade..
  • THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
  • USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for eac....
Check Stock

GALAX PRO 20V 4-1/2" Cordless Circular Saw with 2.0Ah battery, Laser Guide, Rip Guide, 2 Pcs Blades(24T+ 60T), 3400RPM, Max Cutting Depth 1-11/16"(90°), 1-1/8"(45°)

  • Power motor and 2 blades: Blade size 4.5 inches, no load speed 3,400 RPM for faster multi-purpose cuts of wood, soft metal, tile, drywwall, plastic and more with ease.
  • It comes with 2 blades, 24 teeth wood saw blade and 60 teeth metal saw blade which can be easily changed with the allen wrench.
  • Adjustable cutting angle: The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”.
  • Perfect for miter cuts, bevels, framing and edging.
  • Angle guide and quick adjustment gives you a huge degree of versatility in your cuts.
  • Laser guide: To ensure a parallel cut, laser guide is available in our compact circular saw.
  • With the laser indicator as the guide during the cutting process, your line will be illuminated by the beam, it ensures a professional and precise cutting line.
  • Safety and ergonomic: Features double protection switch, prevents the machine from accidentally opening, promises a safer cutting job.
  • Soft rubber handle designed to comfortably fit in hand for improved control with minimal vibration.
  • Vacuum adaptor allows to hook up with a vacuum, sucking away all sawdust coming from the cutting.
  • What you get: 1 x mini circular saw, 1 x 2.0Ah li-ion battery, 1 x 24T TCT saw blade, 1 x 60T HSS saw blade, 1 x fast charger, 1 x rip guide, ....
Check Stock

Mini Circular Saw, ENVENTOR 4.8A Compact Circular Saw, Laser Guide, 4000RPM with 3 Saw Blades 3-3/8" Max Cutting Depth 1-1/16", Ideal for Wood, Soft Metal, Tile and Plastic Cuts

  • 【POWERFUL MOTOR AND COMPACT SAW】580W/4.8Amp powerful motor provides 4000RPM No-Load Speed for cutting wood, metal, tile, aluminum plastics, and PVC tube with ease. 3 Blades: 1x24T TCT(85mm) for wood cuts/ 1x44T HSS(85mm) for wood and soft-metal cuts/ 1 grit diamond blade(85mm) for tile cuts, extending the applications of the compact circular saw. Great tool for home decoration and the perfect gift for woodworking and DIY lovers..
  • 【CUTTING DEPTH】ENVENTOR mini circular saw Cutting depths of up to 1-1/16", The Left-sided blade design gives you a clear sight of the cutting line. A parallel guide attachment ensures straight, precise cuts easily and quickly..
  • 【PRECISE LASER GUIDE and SAFE DESIGN】Legible laser guide can assist you to cut a precise straight line. Greatly improve your work efficiency. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case of any accidental start up. Grip with integrated safety trigger for safer control..
  • 【ERGONOMIC & SAFETY DESIGN】Compared to conventional compact circular saw, its lightweight and compact design makes it portable to carry both indoor or outdoor. The double protection switch prevents the machine from accidentally openi....
Check Stock

LED Lighting Set for Infinity Gauntlet 76191 Collectible Building DIY Light Kit Compatible with Lego Thanos Right Hand Gauntlet Model with RGB Remote Control Lights Without Blocks

  • PRECISE RIP CUTS AND CROSSCUTS: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down..
  • REPEATABLE ACCURACY: The Bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time..
  • SAVE TIME: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every....
  • EASY SETUP: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time..
  • STABILITY: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts..
Check Stock

LIGHTIMETUNNEL 25 PCS Oscillating Saw Blades Universal Metal Wood Multitool Quick Release Tool Saw Blades Fit Black & Decker Porter Cable Dewalt Milwaukee Chicago Rockwell Makita Craftsman

  • ▶▶Universal Compatible Tools : Our 25 Pack quick release saw blades are compatible with many oscillating tools on the market, such as Black & Decker, Makita, Ryobi, Chicago, Craftsman, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More..
  • ▶▶Widely Use Range: LIGHTIMETUNNEL Oscillating saw blades kit contain 7 different types of standard saw blades and precision saw blades-with standard tooth, japanese tooth and precision tooth. Each type of oscillating saw blade is specific for a particular purpose. Ideal for fit for cutting wood, plastics, metals, sawing, cutting, scraping, sanding, shaping, polishing and removing grout and so. It also can meet a variety of needs, which could be used for workshop, household DIY or other place..
  • ▶▶High Quality Saw Blades Set: Our oscillating tool blades are made of high carbon steel and stainless steel, adopting electroplating technology in saw blades surface coated black finish which protects against corrosion.It's featured high heat resistant material and excellent weld technology, which makes our saw blades tougher, wear, resistance and long-lasting, easy cutting and long service life..
  • ▶▶Precision Cutting Design: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure....
Check Stock