Reviews Ring Die Pellet Mills

PRM Traxodent Retraction Caps Small Size 1 Pkg/120

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3623 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

Spex Sampleprep 3614ST Steel Pellets for 3614 Die 40 mm

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3614 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

Epidri Pellets Racemic Epinephrine Size 3 Yellow 1.9 mg 350/Box

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3614 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

SPEX 6775-115 Freezer/Mill, Small, 115V, 60 Hz

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

GAMO Spire Point Double Ring .22 Caliber Magnum Pellets (Tin of 250)

  • Double ring design enhances mushroom effect.
Check Stock

Z GRILLS 20 LB BBQ Pellets 100% Hardwood Natural Wood Smoker Grill Competition-Blend

  • Made from 100% all-natural, pure flavor hardwoods in American mills with absolutely no fillers or binders..
  • Kiln-dried, low moisture content for quick ignition and the perfect blue smoke..
  • Burns more efficiently and completely with low ash for easy clean-up..
  • Perfect for any pellet grill , Z GRILLS, Traeger, Camp Chef, Pit Boss.
  • No risk to order. If any damaged, we promise to reship or refund..
Check Stock

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Jenway (Bibby Scientific US) 8307045 Cole-Parmer Instrument Company 10x10 mm Cell Test-Tube Holder, 6320D

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

Traeger Grills Pro Series 22 Electric Wood Pellet Grill and Smoker, Bronze & PEL314 Pecan 100% All-Natural Hardwood Pellets - Grill, Smoke, Bake, Roast, Braise and BBQ (20 lb. Bag)

  • Product 1: Your purchase includes One Traeger Grills Pro Series 22 Pellet Grill and Smoker. Cover not included.
  • Product 1: Grill dimensions – 27” D x 41” W x 49” H | Weight – 103 lbs. | Cooking Capacity – 572 Sq. In. | Accommodate – 4 Chickens, 5 racks of ribs or 24 burgers | Main rack – 418 Sq. In. | Extra rack – 154 Sq. In. | Hopper Capacity – 18 lbs.
  • Product 1: Never use gas or charcoal again: cooking with wood just tastes better. Traeger created the original wood-pellet grill as the ultimate way to achieve wood-fired taste. Rugged all-terrain wheels easily conquer any backyard terrain..
  • Product 1: The series touts precise temperature control, the Digital Pro Controller has Advanced Grilling Logic to keep temps within plus/minus 15 degrees F for guaranteed precision grilling. 450 °F Max Temp.
  • Product 2: PECAN WOOD FIRED FLAVOR: Traeger Pecan Hardwood Pellets offer an ultra-versatile, slightly nutty flavor that works with any meat, not to mention veggies, fish, and even baked goods..
  • Product 2: NOT ALL PELLETS ARE CREATED EQUAL: The best wood-fired grill on the market demands the best wood pellets on the market. Real taste doesn’t just happen, it’s tied to quality materials and achieving perfect smoke. It starts with all-natural....
Check Stock

Gamo 632092954 Air Rifle Pellets Combo Pack.177 Caliber, Quantity 1000 (Magnum, Masterpoint, Hunter, Match)

  • Combo pack contains 4 types of . 177 Caliber performance pellets.
  • The pointed tip of the Magnum increases the penetration and the double ring design aids in the mushroom effect on impact.
  • The aerodynamic design of the Master point concentrates mass to provide more accuracy at longer distances, and the pointed tip increases penetration on small game.
  • Due to the heavier weight and dome configuration of the Hunter, this pellet performs with terrific impact, even with long distance shots.
  • Match is a precision pellet. A relatively light weight and flat head that cuts targets cleanly makes this pellet tops for shooters wanting tight groups.
Check Stock

Pit Boss Whiskey Barrel Blend Hardwood Pellets, 40 lb

  • SIGNATURE BLEND WOOD FIRED FLAVOR: The flavors of hickory, maple, and cherry hardwoods combine for in our Traeger Signature Blend Hardwood Pellets for flavor that can take on just about anything you cook.
  • From classic BBQ meats, to fish and veggies, this versatile blend gives you full-bodied flavor you’ll go back to time and time again.
  • NOT ALL PELLETS ARE CREATED EQUAL: The best wood-fired grill on the market demands the best wood pellets on the market. Real taste doesn’t just happen, it’s tied to quality materials and achieving perfect smoke.
  • It starts with all-natural hardwood pellets made in American mills.
  • TRAEGER HAS SPENT YEARS DEVELOPING THE PERFECT PELLET: Our hardwood’s unique compact cell structure results in a balanced, dependable burn.
  • Traeger has spent years mastering the development of hardwood pellets that have just the right amount of moisture content—the sweet spot—to maintain a perfect burn-to-smoke ratio.
  • PAIRS WELL WITH EVERYTHING: Pairs especially well with Beef, Poultry, Pork, Lamb, Seafood, Baked Goods, Vegetables.
  • FEATURES: Made in USA, Premium Quality, All-Natural, Clean Burn, No Binders, Low Ash, 20lb Bag.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock