Reviews Reverse Twist Drill Bit And Tap Set

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set

  • 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
  • 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
  • VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
  • HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
  • CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Drill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

Cordless Drill Power Set, 21V Cordless Drill Set with 3000mAh Battery & Fast Charger, 117 Piece Power Tool Set Combo Kit with Power Drill Driver, 3/8\ Chuck Electric Drill Set with 25+1 Clutch

  • ...tch delivers 2 speeds (0-360rpm & 0-1380rpm) for a range of fastening and drilling applications.（Be sure to press the toggle botton to the left or right.）.
  • 【 21V Drill & Max 3/8" Chuck】- 21V drill delivers 3/8" chuck providing maximum accessory compatibility and durability. Cordless drill set has the forward/reverse switch design..
  • 【LED Light & Ergonomic Design】- Drill has the light when you are working in dark places. The light and size of drill is convenient and comfortable. This cordless drill set also with ergonomic design of rubber-covered handle for being breezily operated in one hand..
  • 【117 Pcs Drill Tool Set 】-Premium drill set includes cordless drill,21V battery*2, hole saw kit, sleeve, electric tape, Wall Plug / Screw Anchor Set, electric pen, slotted screwdriver, phillips screwdriver, magnetic bit holder, slotted precision screwdriver , phillips precision screwdriver , blade, twist drill, Metal Drill Bit, Brad Point Drill Bit, Wire cutters, needle nose pliers, box cutter, claw hammer, wrench, tape measure, spirit level, charger, storage box..
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • ...g off or mixed use. And the blue labels with drill bit sizes on are designed for easy identification of the bit size..
  • 【COMPLETE DRILL ACCESSORIES KIT】- Screwdriver bit set: 66 x 1" screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS black oxide twist drill bits, 21 x masonry drill bits, 4 x drill stoppers, 17 x brad point drill bits, 4 x spade drill bits, 1 x extension bit. Other accessories: 4 x hole saws, 1 x arbor adapter for hole saws, 1 x countersink, 1 x nail punch, 1 x bit holder..
  • 【WARRANTY & GIFT IDEA】- We will gladly send you the replacement set if you are unhappy with any parts of this kit. The titanium drill bit set, brad point drill bit set, masonry drill bit set, spade drill bit set, hole saw kit and screwdriver bit set are sold separately in COMOWARE, which can be the good replacement or supplement to your toolbox. This drill driver bit kit combines the versatility and practicality that homeowners would appreciate. It is a nice gift-giving option as well..
Check Stock

Drill America - D/ACO44P12 #44 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 4-36 hss plug tap and matching #44 hss drill bit in plastic pouch.
Check Stock

ACETOP 6 Pcs Combination Tap Drill Bit HSS Titanium Coated 3-in-1 Metric Hex Speed Drill Thread Tap Set Spiral Screw Tapping Bit Tool for Drilling Tapping Countersinking, M3 M4 M5 M6 M8 M10, Gold

  • [Specifications and packaging]: 6 pcs multi-function drill tap bits.Include size: 6-32NC, 8-32NC ,10-32NC, 10-24NC, 12-24NC, 1/4-20NC..
  • [Fitment]: Hex shank tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Drill tap bit set is a classic high speed steel structure + titanium coating..
  • [Advantage]: Combination titanium drill bit 1/4 inch hex shank fits into power tools more easily and securely..
  • [Quick Replacement, One-Click Drilling]: Thread drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

HSS 5/16-36 Right hand Thread Tap and 7.3mm Drill bit

  • Model: 5/16-36 Tap and 7.3mm Drill bit set, Material: HSS.
  • Tap: debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • Characteristics : Heat treated and tempered for file hard threads and a long, useful life.
  • You will Get : 1x 5/16-36 TAP & 7.3mm Drill bit.
Check Stock

Makita A-97748 1/8\ Black Oxide Drill Bit, 1/4\ Hex Shank

  • [Specifications and packaging]: 33 Piece hex shank twist drill bit set.Plastic case..
  • [Fitment]: Wood drill bit set for metal/wood/plastic sink. Suitable for home DIY, and general building/engineering use..
  • [Material]: Impact drill bits use classic high speed steel construction with titanium coating for capability and durability..
  • [Advantage]: Hex shank twist drill bit set drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • [Quick Replacement, Safe Installation]: Titanium drill bit fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
Check Stock