Reviews Resistance Strain Gage

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • .... The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Fowler 54-646-401-0 Electronic Dial Bore Gage Set with 1.4–6\/35-150mm Range

  • Accurate Measurements: The bore gage features an electronic indicator with resolution of 0.00005"/.001mm and measuring depth of 9 inches.
  • Durable Construction: This electronic indicator provides both inch and metric readings.
  • two-point contact system is used to detect geometry problems such as ovality and taper.
  • carbide-tipped contact points provide extended wear and improved abrasion resistance.
  • The easily adjustable bore gage is self-centering and includes a 2-inch contact extension holder.
  • Minimum Hold Feature: This electric gage locks and holds the bore size as the gage is rocked within the part to be measured.
  • Set Includes: A storage case, 2 batteries, 15 measuring anvils, 4 spacers and an instruction manual.
Check Stock

Fowler 52-646-300-0 Cylinder Dial Bore Gage with 6 Measuring Range

  • ACCURATE MEASUREMENTS: This Bore Gage Features A Dial Indicator With A Graduations Of 0.0005" And A Measuring Depth Of 9.5".
  • EXTENDED RANGE: This 2-6" Bore Gage, With A Two-Point Contact System, Is Used For Measuring Hole Diameters And To Detect Geometry Abnormalities. The Carbide-Tipped Anvil Contact Points Provide Extended Wear & Improved Abrasion Resistance.
  • SELF-CENTERING: The Easily Adjustable Bore Gage Is Self-Centering For Fast And Accurate Measurements.
  • USER-FRIENDLY: The Insulated Grip Allows For easier measuring and is easily adjustable.
  • SET INCLUDES: This bore gages comes with a protective fitted case and 2 Inch extension.
Check Stock

Fowler 52-646-400-0 Extender Dial Bore Gage Kit with 1.4-6 Measuring Range

  • ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
  • EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
  • SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.
Check Stock

HFS (R) 36 PCS Grade B GAGE Gauge Block Set

  • [Accuracy]: AS-2 003e Grade B : +/- 0.000050". Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade AS-2 gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters..
Check Stock

Fower 52-646-220-0, X-Tender Metric Dial Bore Gage with 35-160mm Measuring Range

  • Accurate Measurements: This bore gage features a dial indicator with graduations of 0.01mm and a measuring depth of 9.5".
  • Extended Range: This bore gage with a two-point contact system is used for measuring hole diameters and to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • Set Includes: A bore gage with an insulated grip, two measuring feet ranging 35-50mm and 50-160mm respectively, 16 interchangeable anvils, spacers for fine adjustment of the range, a 55mm extension holder, and a fitted case.
  • Self Centering: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • Requires standards for setting nominal sizes (not supplied).
Check Stock

52-646-300-0 Cylinder Dial Bore Gage 2“-6 Measuring Range .0005 Graduation 9.5 Measuring Depth with Carbide Anvils and Insulated Grip

  • Complete set -- The whole set include 1 x Dial Indicator, 1 x Chrome Plated Handle, 1 x Contact Extension, 3 x Washers, 10 x different size Anvils, all parts are collected in a fitted case..
  • Premium Quality -- High strength steel made and chrome plated handle, it is pretty hard and have a great rust resistance ability. Aluminum made gage with PVC covered could effectively protect the gage away from damage. The transparent lid on the gage is anti-scratch, anti-fluid..
Check Stock

Mitutoyo - 516-930-26 Steel Rectangular Micrometer Inspection Gage Block Set with Optical Parallel, ASME Grade 0, 0.0625 - 2.0\ Length (9 Blocks)

  • Micrometer inspection gage blocks are sized for use with a Mitutoyo Micro Checker (sold separately).
  • Grade 0 gage blocks supplied with a Mitutoyo certificate of inspection that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9.
  • High-carbon, high-chrome steel provides high hardness and wear-resistance.
  • Nominal length (in inches) indicated with laser-etched, black characters.
Check Stock

Aluminum Alloy Pin Gage Handle Double End Go No Go Gauge Handle (1-2mm)

  • 【DEDICATED HANDLE】 Our pin gage handle with dedicated handle for pin gage, go-no go gage and plug gage..
  • 【CLAMPING RANGE】 There are optional clamping range from 0.3mm to 16mm for you to choose..
  • 【ALUMINUM ALLOY】 The pin gage handle is made of aluminum alloy material, with delicate appearance and long durability..
  • 【EASY TO USE】 The pin gage holder with simple structure, and detachable design, is easy to use..
  • 【BEAUTIFUL APPEARANCE】 The pin gage handle with green and red color of each end, which is beautiful and convenient to use..
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

Starrett S167CHZ Combined 167AH And S167B Radius Gauges Inch Set With Holder, Satin Finish, 1/64\ - 1/2\ Range, 1/64\

  • Set of 25 radius gauges for measuring concave and convex surfaces in woodworking, metalworking, machining, layout, and pattern-making applications.
  • Each gauge has five measuring surfaces for concave or convex radii, and is stamped with the radius size for accurate sizing.
  • Range from 1/64 to 1/2" in 1/64" increments.
  • Stainless steel with satin finish provides durability and rust resistance.
  • Includes 4"/100mm gauge holder for measuring in narrow or constricted locations and a protective case for storage.
  • Each gage is clearly marked with its radius.
  • Each gage has five different gagine surfaces for both convex and concave radii.
  • All gages have precision finished radii with extra smooth, accurate edges.
Check Stock

HFS(R) 6 Pc Precision Telescoping Gage Set 5/16\ - 6\ Range T-Bore Hole Gauges w/Pouch

  • [MATERIAL]: It is made of carbon steel with chrome plating on the surface.
  • [PACKAGE INCLUDE]: Range: 5/16" - 6" (8mm to 150mm),6PCS in total(1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall).
  • [OPERATION METHOD]: Use the gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with micrometer or caliper to determine the final hole size.
  • [HIGH PERFORMANCE]: The rigid handle and double acting design (automatic centering) can quickly check the internal dimension. The spring tension is constant and the hand feel is even..
  • [APPLICATION]: It is used to obtain the exact size of holes and slots, which is suitable for factories, schools, offices and other places.
Check Stock