Reviews Headspace Gage

Forster Products NATO Chamber Headspace Gage, Rimless, Hardened Steel, Precision Ground, 7.62 NATO Maximum

  • 7.62 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. These rimless chambers require a slightly longer maximum headspace than commercial 308 Win calibers. The 7.62 NATO Headspace Gages do not conform to SAAMI tolerances..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015..
  • QUALITY ASSURED: Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Check Stock

308 Winchester Headspace Gauge Set GO and NO-GO

  • 243 WIN: Use to check headspace of 243 Win., 260 Rem., 7mm-08, 308 Win., 338 Fed, & 358 Win..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo..
  • PRECISION MACHINED: Manufactured from top-quality, hardened ....
Check Stock

Nathan Zipster Running Belt.Bounce Free Waist Pack. Pockets with Zippers. Runners Fanny Pack. Fits All iPhones, Android, Samsung etc. for Men and Women

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455".
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

Forster Products Sammi Dimensioned Headspace Gage, Rimless, Hardened Steel, Precision Ground, 350 Legend, NO-GO

  • 350 LEGEND: Use to check headspace of 350 Legend..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference betwee....
Check Stock

Forster Products Sammi Dimensioned Headspace Gage, Rimless, Hardened Steel, Precision Ground, 350 Legend, GO

  • 350 LEGEND: Use to check headspace of 350 Legend..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo..
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Check Stock

Forster Products 223 Remington NOGO Headspace Gage

  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Check Stock

Forster Products 30-06 NO GO Headspace Gage

  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement..
  • If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Check Stock

Forster Products 303 British NO GO Headspace Gage

  • NO-GO: Corresponds to the maximum recommended headspace for chambering new bolt-action rifles.
  • If a rifle closes on a NO-GO gage, it may be within SAAMI specs, or it may have excessive headspace.
  • To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage.
Check Stock

Forster Products 30-06 Field Headspace Gage

  • FIELD: Corresponds to the longest safe headspace. If a rifle closes on a FIELD gage, its chamber is dangerously close to, or longer than, SAAMI-specified maximum chamber size. If chamber headspace is excessive, the gun should be taken out of service until it has been inspected and repaired by a competent gunsmith. FIELD gages are slightly shorter than the SAAMI maximum in order to give a small safety margin..
Check Stock

Forster Products 243 Win., 260 Rem., 7mm-08, 308 Win., 338 Fed, & 358 Win. FIELD Headspace Gage

  • FIELD: Corresponds to the longest safe headspace. If a rifle closes on a FIELD gage, its chamber is dangerously close to, or longer than, SAAMI-specified maximum chamber size. If chamber headspace is excessive, the gun should be taken out of service until it has been inspected and repaired by a competent gunsmith. FIELD gages are slightly shorter than the SAAMI maximum in order to give a small safety margin..
Check Stock

Forster Products 300 Winchester Magnum NO-GO Rimmed and Belted Headspace Gage

  • NO-GO: Corresponds to the maximum recommended headspace for chambering new bolt-action rifles.
  • If a rifle closes on a NO-GO gage, it may be within SAAMI specs, or it may have excessive headspace.
  • Use to check all standard belted Mags with .535″ O.D.: 257 Wby., 257 STW, 264 Win., 6.5 STW.
  • 6.5 Rem. Mag, 270 Wby., 275 H&H, 7mm Rem. Mag, 7mm Wby Mag, 300 H&H, 300 Wby., 300 Win. Mag,.
  • 30-338 Win. Mag, 308 Norma Mag, 338 Win. Mag, 8mm Rem. Mag, 340 Wby., 350 Rem. Mag, 358 STA, 375 H&H, 416 Rem., & 458 Win. Mag..
Check Stock

Autosampler Vials Cap,9mm Blue Polypropylene Screw-Thread Caps with PTFE Red/Silicone White Septa by Biomed Scientific

  • Size: 22.5*46mm, the vial mouth outer diameter is 20mm,20 mm crimp seal finish are designed to fit most headspace autosamplers.
  • Material: Manufactured from clear Type I borosilicate glass, of which can withstand high internal pressure, the vials have a wall thickness of 1.1mm.
  • Beveled Finish Vial : Reduced the amount of sealing surface between the crimp seal and the glass surface,Also A bevelled top Headspace Neck might be required for some special closure systems (PerkinElmer).
  • Flat Bottom Vial: when vials have to run within the instrument on a slightly downwards tendency and preferred for manual headspace autosamplers,Flat bottom maximizes heating efficiency..
Check Stock

Aluminum Alloy Pin Gage Handle Double End Go No Go Gauge Handle (1-2mm)

  • 【DEDICATED HANDLE】 Our pin gage handle with dedicated handle for pin gage, go-no go gage and plug gage..
  • 【CLAMPING RANGE】 There are optional clamping range from 0.3mm to 16mm for you to choose..
  • 【ALUMINUM ALLOY】 The pin gage handle is made of aluminum alloy material, with delicate appearance and long durability..
  • 【EASY TO USE】 The pin gage holder with simple structure, and detachable design, is easy to use..
  • 【BEAUTIFUL APPEARANCE】 The pin gage handle with green and red color of each end, which is beautiful and convenient to use..
Check Stock