Baluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle
- TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
- Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..
Check StockHC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module
- RXD: the receiver, Bluetooth module receives from another device sent data.
- normally connected to other devices transmitting end TXD?.
- TXD: sending end, the Bluetooth module to send data to other devices.
- receiving terminal is normally connected to other devices RXD.
Check StockAbovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More
- [Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
- [Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
- [Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems, please send us an email and we will be here to help you. Thank you..
Check Stock
PC Interface Controller
- 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
- Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
- Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
- (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
- When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check StockOnyehn 1set Wireless Bluetooth WiFi card Module Board with Antenna Cable Part for Xbox One Replacement Pulled
- If you have any questions after receiving the goods, please contact the after-sales service. If it doesn't work, we will provide a full refund. Please....
- Original and Pulled From Microsoft Xbox One Coonosle.(Note: Because it is removed in the original machine, the Bluetooth module scratches are....
- Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem..
- If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need..
- Package Includes: 1 x Card Module, 1 x Antenna Cable..
Check Stock5pcs HC-SR04 Ultrasonic Sensor Distance Sensor with Ultrasonic Transmitter and Receiver Module Compatible with Ar-duino UNO MEGA2560 Nano Robot XBee ZigBee
- Induction Angle: not more than 15 degrees:....
- the module HC-SR04 works: (1) IO trigger ranging to at least 10us high signal.
- (2) module automatically sends eight 40kHz square wave, automatically....
- Panel wiring, VCC, trig 's (control side), the echo (receiving end), out (empty feet), GND.
- Note: TRIP-pin internal pull-up 10K resistor, down TRIP microcontroller IO port pin, and then to a 10us pulse signal..
- OUT pin for this module as the switch output pin when the anti-theft module, ranging modules do not use this foot!.
Check StockGeneric GT-U7 GPS Module GPS NEO-6M Navigation Satellite Positioning Satellite Positioning Receiver Compatible with 51 Microcontroller STM32 UO R3+ IPEX Antenna for Arduino Drone Raspberry Pi
- IPEX antenna interface，Default distribution：Active antennas，5 DuPont lines.
- GT-U7 module with high sensitivity, low power consumption, miniaturization and high tracking sensitivity, the coverage of positioning is greatly....
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, compatible with NEO-6M.USB interface, can be connected to the computer,....
- Applications: Vehicle handheld devices such as PDA, vehicle monitoring phones, sharing bikes, sharing mobile power, cameras and other mobile....
- Quality after-sales service, any problems with the product, we will quickly solve for you after receiving your email.
Check StockCDM324 Microwave Module, 24GHz 15m Doppler Radar Smart Microwave Body Induction Module Single Channel Switch Intelligent Sensor Module
- ...ghting system, anti-theft alarm system..
- 【Parameter】 Advanced low consumption PHEMT oscillator, Provide various frequency range standards: -UK,-F,Operating Temperature:-20~60℃..
- 【Independence】Independent transmitting and receiving route, can get the big gain. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage..
- 【High performance】 Single channel operation. High sensibility, high flexibility, low cost, operating distance is 15m. Not influenced by temperature, humidity, noise, air flow, dust, ray etc, adaptive to terrible environment.
Check Stock
ANDELI 110V/220V 200AMP Aluminum Welding Machine Smart PFC Module Foot Switch 2T 4T & MMA TIG Welder with AC DC Pulse TIG Welding Machine TIG-250PP Package 0
- 【Function】AC/DC TIG, PULSE TIG, MMA. This is a multifunctional Aluminum welding machine with a voltage of 220V. The maximum output current is 200 AMP. suitable for aluminum, stainless steel and thinner metals.Equipped with 4M Welding Torch.
- 【LCD Displayed】It is a 110V/220V smart control welder. It is super easy and convenient to chose the welding mode, material, welding wires, tungsten rods, electorde and the workpiece thicness you need by spinning and pressing the buttons. It will show all the parameters clearly.
- 【PCF】ANDELI TIG-250PP is equipped with a real PFC module, the latest intelligent welding machine module, which intelligently adjusts the input current to achieve the best welding effect..
- 【Foot Switch】Up to 10W pedal life, excellent internal circuit design brings finer control and faster response. You can adjust the current size by the depth of the pedal..
- 【Safety】CE certification, Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free guidance. We will provide returns and exchanges within 30 days after receiving the goods, and provide a two-year warranty and free replacement parts..
Check Stock
Tangyy 5pcs HC-SR04 Ultrasonic Sensor, Distance Sensor with Ultrasonic Transmitter and Receiver Module fit for Raspberry Pi,MEGA2560, Robot (Blue)
- Widely used: Sweepers, DIY robot cars, for raspberry pi project,It can be building a little robot to measure distances in a room under construction.
- HC-SR04 Ultrasonic Sensor Module: It measures distance by sending out a sound wave at a specific frequency and receiving back that sound wave to bounce.
- Good Accuracy: Power Supply :3V-5.5V DC, Detection angle: 003c15 °, Minimum target distance is 2.0cm from the end of the Voltage transducers. Maximum repeatable target distance is 2CM-150CM for a large unobstructed stationary target.
- Easy to install: There are 4 pins out of the module, VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output, So it's a very easy interface for controller to use it ranging.
- Note: The module should be inserted in the circuit before been powered to avoid producing high level of Mis-operation.
Check Stock
GPS Navigation, 7in Boat Chart Plotter Marine BDS/GPS IPX6 Waterproof Dustproof AIS Alarming
- ...ion, real‑time plotting of AIS targets on the chart, with multiple alarm functions, such as AIS target encounter alarm, ship type alarm, speed alarm, AIS identification ship name, AIS wake, AIS fleet, AIS fleet members operating. It is convenient to query the dynamic information of any AIS target, SMS sending and receiving. The AIS input port is convenient for connecting AIS equipment and dynamically plotting AIS targets on the chart..
- 7in LCD backlit colorful screen, for high brightness and wide viewing angle, good readability under light. The front U disk is upgraded and supports dual keyboards, which is convenient and quick. Detailed and large‑scale chart, more efficient chart refresh. Real‑person speech synthesis technology provides you with humanized voice announcements and warnings..
- Adopting plastic shell design, waterproof, dustproof, anti‑interference, fast heat dissipation, durable. Waterproof and dustproof grade is IPX6. And we deliver detailed instructions for use, so don't worry about not installing and using it after purchase..
- Support for BDS and GPS dual‑mode high accuracy positioning, position, speed, and heading information are more accurate. Adopt high‑precision GPS receiving module. Six‑picture mode can be switched free....
Check StockIZOKEE CP2102 Module USB to TTL 5PIN Serial Converter Adapter Module Downloader for UART STC 3.3V and 5V with Jumper Wires
- Designed to be used for USB to TTL electronic projects..
- Supports full range of STC single-chip microcomputer with output voltage 3.3V and 5V..
- Perfect support for the highest baud rate up to 115200 bps..
- Module has status indicator light, sending and receiving indicator lights. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness..
Check StockWiFi Speed Booster
- 1. It can speed up your internet faster 2x..
- 2. Optimize the wireless module, improve the efficiency of 30% - 70%..
- 3. Keep the network stable at a low signal strength..
- 4. Intelligently adjusts the receiving power and saves more energy..
Check Stock
