Reviews 433 Receiving Module
HiLetgo 3pcs RXB6 433MHz Superheterodyne Wireless Receiver Module for Arduino/ARM/AVR
- RXB6 433MHz Superheterodyne Wireless Receiver Module.
- Power supply voltage input range: 3V-5.5V.
- Low power consumption, 3.3V @ 433.92MHz, 6.0mA.
Check Stock11J28-06881 - Upgraded Replacement for Beacon-Morris Direct Spark Ignition Control Board
- The Honeywell Home PROTAKEOVER is a module add-on for the Honeywell Home PROA7PLUS Alarm Panel. By installing this module, your PROA7PLUS will be able to support one of several legacy RF sensor lineups. You can pick between Honeywell 5800, 2GIG 345 MHz, 433 MHz, 319.5 MHz, and Bosch Sensors..
- Once the PROTAKEOVER Module has been installed, it will replace the existing back plate for the PROA7PLUS Panel. The PROTAKEOVER serves as the back plate, as it also provides an antenna for communicating with the legacy sensors..
Check StockAutel TS601 TPMS Relearn Tool TPMS Programming Tool OBDII Code Reader Advanced Version of TS501/TS408/TS508 Key Fob Testing Active Tire Sensor for all 315/433MHz
- 【2022 Newest TPMS Tool + OBD2 Scanner 2 in 1】 Autel TS601 TPMS scan tool integrate tire pressure sensor Diagnostics(Check), Activation(Read), Programming, and Relearn in one. It activates and reads tire sensor information by receiving 315/433MHz signal, and resets the TPMS module via the OBD interface. When it is an OBD2 scanner, the TS601 supports Read/Clear Codes, I/M Readiness, Data Stream, View Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, etc..
- 【Professional TPMS Programming Tool】 The sensor programming tool empowers you to program the sensor data to the MX-Sensor and replace the faulty sensor that is not functioning. This TS601 TPMS tool only serves programming function on AUTEL MX-Sensor (315/433MHz). And providing 4 programming options to deal with your different situations: Copy By Activation, Copy By Manual Input, Auto Create and Copy by OBD..
- 【99% of TPMS Sensor Activating】 Autel TS601 TPMS Relearn Tool enables you to activate 99% of the known OEM sensors at ease. Widely applied in TPMS sensor replacement, tire replacement, car assembly, and sensor detection. Whether an automotive DIYer or a mechanic, you can easily trigger activate any brand of sensor with this TPMS reset tool. This TPMS activating tool ....
Check StockMHCOZY Updated WiFi Wireless Smart Switch Inching Self-locking Relay Module,Set Inching Time from 0.5 second to 1 Hour,be applied to access control,DIY WIFI Garage Door Opener Smart life app 2CH
- MHCOZY 2 channel Smart life APP Tuya WIFI Relay Module(with 433Mhz RF receiver built in,don't include 433Mhz RF,support learing code 433Mhz only),....
- Easy Configure,Once it's Powered on,Phone Bluetooth will find the Smart Relay asap,tap and add to your 2.4G WIFI Network.After configured,even the....
- Widely Usage,set on/off mode to automate your Light,Set Inching mode to DIY WIFI Bluetooth Garage Door Opener,set interlock to add wifi to your....
- Schedule and Share,set sunrise sunset countdown repeat schedule,easy share remote control to family.
- Voice control,one key to link to Alexa Assistant,use your voice command to open your Garage when busy.
Check Stock5Pcs 2X062H Microwave Oven High Voltage Diode Rectifier
- 433MHz version conforms to EN 300 220-3 and EN 301 489-3.
- High performance double superhet. PLL synthesizer with TCXO.
- Data rates up to 5 kbps for standard module.
Check StockMaikrt Embedded QR Code Scanning Module USB and UART Serial Port Barcode Scanner Identification Module Bar Code Reader for Access Control, Locker Scan Code Payment etc
- A small 1D/2D codes reader,Can be embedded in any device for scanning code to identify other items, by using the intelligent image recognition algorithm.Configurable via scanning 'configuration code',Module matching light source, Can work in the dark..
- Embedded QR code scanning module is used for access control, channel gate, locker, scan code payment, etc. And other industry equipment to achieve smart project,The performance is stable and the decoding speed is very fast..
- 2D/QR code scanning module support linux,Android, windows and other systems, Can easily capture bar codes 1D, 2D on labels, paper, and mobile phone or computer displays,Sensitive and accurately..
- USB and TTL dual interface, equipped with 9pin terminal line and USB cable, which is convenient for you to convert between UART TTL serial port and USB interface. No need to worry about the use of interface types..
- After receiving our products, connect to the line, after power-on That can scan the code.
- The module scans the code directly and sends the result to your host computer automatically. After receiving the data, the host computer can proceed to the next step..
Check StockBaluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle
- TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
- Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..
Check StockHC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module
- RXD: the receiver, Bluetooth module receives from another device sent data.
- normally connected to other devices transmitting end TXD?.
- TXD: sending end, the Bluetooth module to send data to other devices.
- receiving terminal is normally connected to other devices RXD.
Check StockAbovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More
- [Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
- [Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
- [Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems, please send us an email and we will be here to help you. Thank you..
Check StockPC Interface Controller
- 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
- Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
- Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
- (current greater than 100mA),PWM signal receiving frequency range: 1KHZ-3KHZ.
- When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check StockOnyehn 1set Wireless Bluetooth WiFi card Module Board with Antenna Cable Part for Xbox One Replacement Pulled
- If you have any questions after receiving the goods, please contact the after-sales service. If it doesn't work, we will provide a full refund. Please....
- Original and Pulled From Microsoft Xbox One Coonosle.(Note: Because it is removed in the original machine, the Bluetooth module scratches are....
- Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem..
- If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need..
- Package Includes: 1 x Card Module, 1 x Antenna Cable..
Check StockCool Toner Compatible Toner Cartridge Replacement for Brother TN433 TN-433 MFC-L8900Cdw TN431 for Brother HL-L8360Cdw HL-L8260Cdw MFC-L8610Cdw HL-L8360Cdwt Printer (Black Cyan Magenta Yellow, 4 Pack)
- Replacement for OEM: Cool Toner Compatible for Brother TN433 TN-433 TN 433 TN433BK TN433C TN433M TN433Y High Yield Toner Cartridges also Available in Standard Yield TN431 TN-431 TN 431 TN431BK TN-431C TN-431M TN-431Y Toner Cartridges.
- Compatible for Printer: for Brother MFC-L8900CDW toner, MFC-L8610CDW, HL-L8360CDW, HL-L8260CDW, HL-L8360CDWT Color Laser All-in-One Printer.
- High Yield: 4,500 Pages (Black) and 4,000 Pages (Color) Based on 5% coverage (Letter/A4).
- Color: TN433BK (Black), TN433C (Cyan), TN433M (Magenta), TN433Y (Yellow).
- Easy to be installed and fully compatible with your printer.
Check Stock5pcs HC-SR04 Ultrasonic Sensor Distance Sensor with Ultrasonic Transmitter and Receiver Module Compatible with Ar-duino UNO MEGA2560 Nano Robot XBee ZigBee
- Induction Angle: not more than 15 degrees:....
- the module HC-SR04 works: (1) IO trigger ranging to at least 10us high signal.
- (2) module automatically sends eight 40kHz square wave, automatically....
- Panel wiring, VCC, trig 's (control side), the echo (receiving end), out (empty feet), GND.
- Note: TRIP-pin internal pull-up 10K resistor, down TRIP microcontroller IO port pin, and then to a 10us pulse signal..
- OUT pin for this module as the switch output pin when the anti-theft module, ranging modules do not use this foot!.
Check Stock