Reviews Rear Suspension Bushing Kit
OTC 4244 Freightliner Rear Suspension Bushing Tool
- OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
- Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
- Completes the job in a fraction of the time that traditional methods take.
- Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
- No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check StockOEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing
- EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
- WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
- The OEM Tools bushing driver set includes 20 different size cups for versatile use.
- ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
- Don’t have to remove components from vehicles with this bushing tools set.
- ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
- Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
- MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
- Cups with bushing press and pull kit allow for hundreds of combinations.
Check StockOTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump
- OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
- Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
- Completes the job in a fraction of the time that traditional methods take.
- Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
- No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check StockCar Shifter Bushing, Car 6 Speed Manual Transmission Shifter Bushing Front Rear Shifter Linkage Stabilizer Bushings Replacement for Subaru Impreza WRX STI 2004‑2020 Shifter head/shift accessories
- Function: The shifter linkage bushing will help eliminate shift ramps, maintain more consistent shifts and quickly get into gears for better operation..
- Fitment: The front and rear shifter bushing kit is a replacement for Subaru Impreza WRX STI 2004‑2020, with 6 speed manual transmissions only..
- Feature: The bushing kit could improve shifter precision and feel during gear changes, significantly reducing chances of sloppy or missed shifts..
- Material: Made of PU and metal material which could better improve suspension, drivability, and supports better overall handling and performance of your car..
- Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability..
Check Stocklesolar Trailing Arm Bushing Tool Kit Suspension Control Arm Bushing Tool Kits Rear Bushing Removal Tool Kit with Storage Carrying Case Suitable for The Ford Focus Bushing Removal MK1 1998
- 【Application】Control arm bushing tool kit has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, Mazda 5 CR, CW, MPV 2005, V50 2004-2012, S40 MK sedan 2003-2012..
- 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
- 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization..
- 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
- 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you ....
Check StockMoKitDora Motorcycle Rear Shock Harley Lowering Shock 10.5”/267mm Universal Rear Suspension Kit, 1980-up Harley Touring and 1983-up Sportsters, 1 Pair Silver
- ...itment – The length of Eye to Eye Core is around 267mm/10.5″. Eye Diameter(with bushing) is around 16mm. This motorcycle rear shock kit fits most vehicles with shocks of 267mm eye to eye distance. Perfect for 1980-up Harley Touring and 1983-up Sportsters (Excluding Trike and Models with Fork Cartridge).
- Friendly Suspension Kit – This unniversal motorcycle rear shocks absorbers help reduce road bump, provide a smooth comfort and safety ridding experience. This shock offers a lower position than the stock on rear, which makes it perfect for low profile rider to keep foot on the ground and keep the same quality ride experience.
- Quality Speaks – Made of carbon steel which has high tensile strength, the solid structure makes it durable for long-lasting performance, not easy to break. Chrome plated process features a brand new surface, rust resistant and water proof.
- Easy to Use – Adjustable spring preload, you can adjust the length and pressure to a comfortable position for rider. It comes with the matching wrench and spare tubes, a great pair of shock kit for your bike customizition.
- Customer Support – Comes with a pair of black shock kit and matching hardware, just as picture shown, instruction is not included. Back-up with 24/7 customer service....
Check StockOTC Tools 4247 Hendrickson Suspension Bushing Master Tool Kit
- Reduces service time to remove and install HD rear suspension bushings substantially.
- Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
- Tool mounts to suspension for less weight to hold.
- Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
- Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.
Check StockMoKitDora Motorcycle Rear Shock Harley Lowering Shock 10.5”/267mm Universal Rear Suspension Kit, 1980-up Harley Touring and 1983-up Sportsters, 1991-up Dyna,1 Pair Black
- ... length of Eye to Eye Core is around 267mm/10.5″. Eye Diameter(with bushing) is around 16mm. This motorcycle rear shock kit fits most vehicles with shocks of 267mm eye to eye distance. Perfect for 1980-up Harley Touring and 1983-up Sportsters, 1991-up Dyna (Excluding Trike and Models with Fork Cartridge).
- Friendly Suspension Kit – This unniversal motorcycle rear shocks absorbers help reduce road bump, provide a smooth comfort and safety ridding experience. This shock offers a lower position than the stock on rear, which makes it perfect for low profile rider to keep foot on the ground and keep the same quality ride experience.
- Quality Speaks – Made of carbon steel which has high tensile strength, the solid structure makes it durable for long-lasting performance, not easy to break. Powder coated process features a brand new surface, rust resistant and water proof.
- Easy to Use – Adjustable spring preload, you can adjust the length and pressure to a comfortable position for rider. It comes with the matching wrench and spare tubes, a great pair of shock kit for your bike customizition.
- Customer Support – Comes with a pair of black shock kit and matching hardware, just as picture shown, instruction is not included. Back-up with 24/7 customer service....
Check StockSuspension Rear Lowering Shackles 2" Leaf Spring Drop Shackle Kit fit for Chevy C1500 C2500 K1500 K2500 Suburban S10 Blazer Tahoe Silverado 1500 GMC Yukon Sierra Ford Ranger F150 Replaces 6400 410520
- 【Compatible】The suspension rear lowering shackles kit compatible with 1988-1998 Chevy C1500 & C2500, 1992-1999 Chevy C1500 & C2500 Suburban, 1992-1999 Chevy K1500 & K2500 Suburban, 1992-1994 Chevy S10 Blazer, 1995-1999 Chevy Tahoe, 1999-2019 Chevy Silverado 1500, 2007 Chevy Silverado 1500 Classic, 2019 Chevy Silverado 1500 LD, 1992 Chevy S10, 1988-1998 GMC C1500 & C2500, 1992-1999 GMC Yukon, 1999-2019 GMC Sierra, 1998-2009 Ford Ranger, 1997-2003 Ford F150, 2004 Ford F150 Heritage..
- 【Function】The suspension rear drop shackle kit is designed to lower the rear of your sport truck or SUV up to 2 inches..
- 【Replaces OE】The suspension rear lowering shackles replaces OE: 6400 410520. Installation is very simple, no welding is required. According to different models and years, the suspension rear drop shackle kit will be installed in different directions. If you are not sure, please contact us first..
- 【Quality】The suspension rear lowering shackles kit is manufactured by an ISO-certified manufacturer, and meets or exceeds OEM requirements. 100% factory tested.Replaceable and lubricable polyurethane bushings have longer driving performance and longer service life.
- TIG welding is better than conventional MIG welding.
Check StockMountain Bike Rear Shock Absorber Bicycle Rear Biliary Spring Shock,Coil Spring Black,125mm (4.9\) 165mm(6.3\) 190(7.5\) 850/1000/1350Lbs (Eye-to-Eye 165mm Spring Rates 750Lbs)
- Application:Rear suspension shock absorber, suitable for most mountain bikes with the same installation size.The suspension provides a smoother rid.
- OCCASION:This coil shock pack includes many features found on higher end shock absorbers. This rear shock absorber is a perfect enhancement to mountain bikes, electric bikes, mobility scooter and other bicycle..
- PRODUCT SPECIFICATION:High-quality finished surface: CNC alloy material, dark hard-anodized, Coil spring. Bushings: Top bushing size is 8mm x 24mm.
- AVAILABLE SIZE:Available Size Eye to Eye x Travel and Spring rates: 190mm × 50 mm ( 7.48 × 1.97 inch) 1000Lbs、190mm × 50 mm ( 7.48 × 1.97 inch) 1350Lbs、160mm × 50 mm ( 6.30 × 1.97 inch) 1350Lbs、160mm × 50 mm ( 6.30 × 1.97 inch) 1000Lbs、125mm × 50 mm ( 4.92 × 1.97 inch) 850Lbs.
- Note:Please measure the size of your shock for matching before buying.
Check StockTCT-MT Adjustable Rear Air Ride Suspension Kit w/Air Tank Fits for Harley Davidson Harley Touring Bagger Electra Street Road Glide Road King CVO 1994-2022
- Adjustable Rear Air Ride Suspension Kit w/Air Tank Fit for Harley Davidson Harley Touring Bagger Electra Street Road Glide Road King CVO 1994-2022.
- otes: Need modification to install the AIR TANK with dual exhausts.
- Adjustable Rear Air Ride Suspension Kit Fully Collapsed approx. 9.64inches(24.5cm).
- This Adjustable Rear Air Ride Suspension Kit will allow you to lower your bike 2 to 3 inches with all of the air released, The air it up to stock ride height for a smooth ride in a matter of seconds.
- Adjustable Rear Air Ride Suspension Kit Fitment: Fits For all Harley touring models 1994-2019 Street Glide Road Glide Electra Glide Road King.
- Package Included : One Air Ride Kit with air thank (as shown on the first picture). PLEASE CHECK THE DESCRIPTION FOR MORE DETAILS!.
Check StockTiger Tool Pin and Bushing Starter Kit Without Hydraulic Cylinder for Commercial Trucks, for use with Class 6-8 Transportation Trucks and Equipment, 15099
- This Starter Kit allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings - all while the suspension remains on the vehicle. Please Note: The 15099 does not include any necessary Adapters required to operate, all adapters are sold separately..
- Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
- There is no need to handle or remove heavy suspension assemblies. The removal of the spring packs from the axle is no longer required and this kit has 20 tons of pulling power for efficient pin removal and installation..
- The 15099 Pin & Bushing Starter Kit, with one or more adapters, eliminates time-consuming, labor-intensive and costly processes.
- technicians are no longer required to remove the suspension, haul it to the shop press or reassemble it to the vehicle. This system reduces shop time by as much as 70%! With more than 20 different adapter kits to choose from, and new ones being developed all the time, there sim....
Check StockRoykaw Rear Leaf Spring Bushing & Sleeves Kits for Club Car DS Golf Cart 1981-up & EZGO TXT/Medalist 1994-up
- High quality long lasting rubber. Package includes 6 sleeves and 12 bushings..
- Complete set of leaf spring bushings (Both front and Rear Leaf Springs) and Upper suspension shackle bushings and sleeves..
- Fits Club car DS 1981-up & EZGO TXT 1994-up. Both electric and gas models..
- Fits EZGO TXT 1994-up gas and electric, Reference OEM Sleeve Part No#: 70289G02.
- Fits Club Car DS 1992-up gas and electric, Reference OEM Sleeve Part No#: 1012303.
Check Stock