Reviews Rear Wheel Spindle Bushing Tool

lesolar Trailing Arm Bushing Tool Kit Suspension Control Arm Bushing Tool Kits Rear Bushing Removal Tool Kit with Storage Carrying Case Suitable for The Ford Focus Bushing Removal MK1 1998

  • 【Application】Control arm bushing tool kit has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, Mazda 5 CR, CW, MPV 2005, V50 2004-2012, S40 MK sedan 2003-2012..
  • 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization..
  • 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you ....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ...g puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • Blow Mold Case: This bushing removal tool is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • ...o OEM 27213, quality and function meet to OEM. High precision and hardness, designed with original car data, manufactured to OEM specifications to make sure accurately fits..
  • 【HOW TO USE】-- Very easy to operate -- ①Hub removal at first.
  • ②Remove the bearing from the spindle/ bearing seat.
  • ③Then install new inner wheel bearings.
  • ④ Next install new outer wheel bearings.
  • ⑤Install the hub into the bearing head-stock finally & Finished. Package included hub removal tool, front wheel bearing adapters, pusher washers, receiver sleeves, nut-bolt, heavy duty bearing and portable plastic box..
  • 【PREMIUM SUPPORT】-- Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this 27213 Master Wheel Hub & Bearing Remover and Installer Tool Kit simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty..
Check Stock

OTC 4244 Freightliner Rear Suspension Bushing Tool

  • OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLD....
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Dynabrade 52711 2\ (51mm) Dia. Right Angle Depressed Center Wheel Grinder.4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8\-24 Spindle Thread

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, plus heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 15,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole. Guard and wheel flange set also included.
  • 2" (51mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8"-24 Spindle Thread.
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

LEAPGOMAX Golf Cart Spindle Bushings Kit fit EZGO TXT/PDS 2001-UP Gas & Electric, Bushing Spindle, King Pin Tubes, Claw Copper Sleeves Kit, OEM#70648-G01 70749G01 70745G01

  • ⛳Fits Golf Carts: Colf Cart 2001-current E-Z-GO Gas & Electric TXT/PDS(Will not fit for EZGO RXV)4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400..
  • ⛳Fits ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200..
  • ⛳Fits Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles..
  • ⛳High quality with heavy duty exceed OEM quality Golf Cart Spindle Bushings Repair Kit Assembly..
  • ⛳Package: 2 PCS Spindle King Pin Tubes, OEM# 70745-G01,614034, 601707.
  • 2 PCS Spindle Bushing with Flange, OEM#70648-G01, 632925, 601915.
  • 2 PCS Spindle Bushing without Flange, OEM#70749-G01, 632926, 601916.
  • 2 PCS Spindle King Pin Bolts, OEM#00407-G6, 620380.
  • 2 PCS Thrust Washers, OEM# 70754-G01, 601920.
Check Stock

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Check Stock

BOSCH 4-1/2\ Small Angle Grinder GWS9-45

  • COMPACT POWER: The Bosch GWS9-45 Angle Grinder contains a powerful motor in a lightweight, compact tool. At only 4 lbs, the GWS9-45 has a motor that provides 8.5 amps and 11,000 rpm..
  • DURABLE: The GWS9-45 includes durable carbon brushes for extended tool life. The Service Minder brushes also stop the grinder when preventative maintenance is needed..
  • EFFICIENT: The GWS9-45 provides direct-motor cooling for better workload and a quick-change toolless disc change and a large spindle lock. The side handle conveniently adjust to two positions.
  • PROTECTION: Directed air flow diverts dust from vital components of the grinder while the burst-protection adjustable guard provides user protection and safety..
  • Quick-change toolless disc change and a large spindle lock.
  • Included Components: (1) 4-1/2-Inch Grinder (1) Auxiliary Handle (1) Wheel Guard (1) Flange Kit (1) Spanner Wrench (1) Abrasive Wheel.
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
Check Stock