Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit for 2007-2019 Chevy Silverado/GMC Sierra 1500 2WD/4WD - Full Suspension Lift Kit with Rear Shock Mount Extenders (Black)
- COMPATIBLE WITH 2007 - 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 (6-LUG - 2WD 4WD). *Does NOT fit 2007 Classic / TrailBoss / AT4 Models, 2015+ vehicles equipped with factory stamped steel UCA, or 2019 models with 5/8 Rear Center Pin. This kit is NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System..
- NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks..
- TECHNICAL NOTES: 3.5 inch front and 3 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. IMPORTANT NOTE: Installation of Aftermarket Uniball UCA is highly recommended after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA..
- HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground c....
Check Stock
2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
- ...ther side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoo....
Check StockRancho RS66124BR5 Suspension Kit
- COMPATIBILITY -- Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel.
- non-Rubicon models will net taller lift height versus Rubicon).
- BUILT FOR THE TRAIL -- Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height).
- COMPLETE SOLUTION -- Includes four Rancho RS5000X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware.
- ENHANCED CONTROL -- Rancho RS5000X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and rod overextension inside the shock.
- order RS66124BR5-1 and RS66124BR5-2 for a complete kit.
Check StockSupreme Suspensions - 3 Rear Lift Blocks for 1999-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 6-Lug 2WD/4WD - High-Strength Steel Tapered Lift Blocks 9/16th Pin
- COMPATIBLE WITH 1999 - 2019 Chevrolet Silverado 1500 (2WD 4WD) and 1999 - 2019 GMC Sierra 1500 (2WD 4WD). *Will Fit 6-Lug Models Only. **NOT....
- CONTENTS: (2x) High-Strength Steel Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack..
- TECHNICAL NOTES: 3 inch rear suspension lift. Block Specifications: 3" Tall, 9/16th Pin, Built-In Taper. !!! Longer U-bolts are required for....
- INSTALLATION: Designed to be installed simply and easily by placing the new blocks between your axle and OE leaf pack, and then securing everything....
- BENEFITS: Improves the look of your vehicle and increases rear-end ground clearance, allowing you to fit larger custom rims and tires. Fabricated with....
Check Stock2.5" Series II Suspension Lift Kit replacement for Rough Country 635, Compatible with 07-18 Jeep Wrangler and Wrangler Unlimited JK
- Rear Coil Spacer 2in Lift, front Coil Spacer 2.5in Lift..
- The spring fixing design can fix the spiral spring in the proper position when the end joint moves..
- This kit help you run larger wheels and tires(35in tires), but run 35in tires on stock wheels.You need to double check the clearance between the front tire, lower control arm, and anti-roll bar linkage..
- NOTE: 2012-2018 models require exhaust modifications to clear the front driveshaft.
Check Stock2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With JEEP 1999-2004 GRAND CHEROKEE Note fr 01/03/99
- 2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With JEEP 1999 - 2004 GRAND CHEROKEE (Note: fr.....
- Extended Length:18.43[Inch] Compressed Length:12.78[Inch] Pounds Of Force:178[LBS].
- Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications.
- NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And....
- Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to....
Check StockC1606389 14 Inches Truck Camper Shell Lift Supports Struts Shocks Gas Spring 24 Lbs C16-06389 (2 Pack）
- ❤【Product Dimensions】-- .Extended Length:14 inch[355mm] , Stroke 5.08 inch [ 129 mm ]，Perfect fits for rear lift doors of truck camper cover.
- ❤【Characteristic】--.C16 - 06389 Gas Spring.
- ❤【Fit】--.End Fittings: 10mm nylon ball sockets.
- ❤【Package Includes】--.Packing: 2 pcs × gas lift supports.
- ❤【Buy Confidence】--.For any reason you're not completely satisfied,can ask for a replacement or refund wthin 3 months..
Check Stock2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With NISSAN 2005-2015 XTERRA Note 05 06 07 08 09 10 11 12 13 14 15
- 2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With NISSAN 2005 - 2015 XTERRA (Note:05 06 07....
- Extended Length:19.02[Inch] Compressed Length:11.97[Inch] Pounds Of Force:137[LBS].
- Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications.
- NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And....
- Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to....
Check StockC16-06389 Truck Camper Shell Lift Supports Struts Shocks Gas Spring 14 Inches 2 pack
- 【Part Number】: C16-06389, C1606389. Force: 24 pounds of pressure..
- 【Exact fit 】original equipment design ensures easy installation and precise operation.End Fittings: fits 10mm nylon ball sockets.
- 【Dimension】Extended Length A [in]: 13.98, Compressed Length B [in]: 8.90, Stroke C [in]: 5.08..
- 【High Quality】After QPQ processing, the stroke rod surface light clear, small friction resistance, no blunt, anti-rust, anti-wear to extends....
- 【Vehicle Location】: Gas spring lift struts for rear lift doors of truck caps.Easy to install..
Check StockWadoy 14 Inches Truck Camper Shell Lift Supports Struts Shocks Gas Spring,C16-06389 2 pack
- 【Part number】: C16-06389, C1606389. Force: 24 pounds of pressure..
- 【Exact fit】: Original equipment design ensures easy installation and precise operation. End fittings: fits 0.394 inch nylon ball sockets..
- 【Dimensions】: Extended length A [in]: 13.98, compressed length B [in]: 8.90, stroke C [in]: 5.08..
- 【Vehicle location】: Gas shock absorbers for rear lift gates on truck tops. Easy to install..
- 【Your choice】: If there is any problem with the lift brackets, please contact us. We will replace a new one or refund for you..
Check Stock
AKM F150 Lift Kit 3' Front and 2' Rear Leveling Lift Kit for 2004-2022 Ford F150 4WD 2WD
- WARM TIP: This set will raise the front of the truck by 3″ and the rear of the truck by 2″. Suitable for for 2004-2022 Ford F150 4WD 2WD.（The label on some products may not be updated in time,the product is applicable to the F150 mentioned above）.
- HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable..
- EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2″, the height of the car front lift is 3″, the thickness of the rear lift block is 3″, but the height of the car rear lift is 2″.Because the lifting height and kit thickness are not 1:1..
- ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level..
- PRODUCTS INCLUDE: 3″Front lift spacers x2,2″Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you..
Check StockBilstein B8 5100 Series Set of 4 Monotube Replacement Gas Charged Shock Absorbers for 10-15 Toyota 4Runner 4WD 0-2.5in Front and 0-2in Rear Lift
- compatible with | | 4Runner: > 2010-2017 4Runner with 0" to 2 1/2" of Lift, including Limited, SR5, and Trail 2017 4Runner TRD Off-Road with 0" to 2 1/2" of Lift | FJ Cruiser: > 2010-2014 FJ Cruiser Base with 0" to 2 1/2" of Lift.
- Front: Collapsed Length: 17.58" (446.50mm) Extended Length: 22.48" (571.10mm).
- Rear: Collapsed Length: 14.91" (378.71mm) Extended Length: 23.50" (596.90mm).
- Bilstein 5100 Series Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions > The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving > Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0"-2.5" of front end lift, depending on application > Provides increased wheel travel and improved handling.
Check StockLOSTAR Front & Rear 2" Full ATV Lift Bracket Kit For 1997-2020 Hon-da Recon TRX250
- ✅Description: This lift kit will lift both front and rear, gain 2 inches of clearance for bigger tires, great way to gain ground clearance for more technical riding designed and built to withstand tough riding conditions..
- ✅Compatibility: 1997-2020 Hon-da Recon TRX 250.
- ✅Placement on Vehicle: Front, Rear. Type: Lift kit. Surface Finish: Silver. Lift Height: 2". Included Hardware: Mounting Hardware. Easy Bolt on application. No Cutting, drilling or welding need..
- ✅Package Includes: 1 Set of Front & Rear 2" Full Lift Kit.
- ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock
