Reviews Rail Fittings

Pack of 8 NUZAMAS Bed Brackets, Heavy Duty Bed Hinges, Connector for Bed Corner Fixings, Bed Frame Hardware Rail Bracket Fittings Fastener

  • Set of 8 NUZAMAS Bed Frame Brackets, Bed Rail Fittings, 4 right and 4 lefts, made of hardened metal, idea for timber beds of any size..
  • These bed rail fittings are designed to any building a timber bed or replacing the old brackets on an existing bed.
  • It is easy to use, simply screw the plate flush with the end of your side rail, then set the bracket at the desired height. When it is done, the plate will just slot into the bracket firmly and securely.
  • Comes with installation screws for your convenience.
  • 2.5mm extra thick for more strong support, fix your rickety bed in one go.
Check Stock

Kyuionty 4 Sets Wood Bed Rail Connecting Fittings 5 Inch Thicken Furniture Bed Hardware

  • Package Content: 4 Sets Bed Rail Fittings 5 Inch Length. No Screws included..
  • Bed Hardware Material: Iron. Thickness: 3mm..
  • Application: Bed rail fittings with teeth to hold with strength, great for repairs or making your own bed. Also work for other knock down applications..
  • 100% Satisfaction Guarantee: Our products are backed by quality customer service to ensure that your satisfaction is guaranteed. If for any reason you do not like our products, you can return them unconditionally within 90 days and get a full refund..
Check Stock

Bear Hollow Supply Set of 8 Bed Slat Brackets Heavy Duty

  • High Quality Material - Bed rail brackets are made of heavy-duty galvanized steel. The surface is galvanized and polished, not easy to rust. The thickened material is more load-bearing, and the porous design is stable and does not fall off..
  • Rich Package - The non-mortise heavy duty rail fittings set contains 12 brackets, 12 plates and enough screws. You can replace the old bed rail brackets at anytime..
  • Bed Rail Brackets Size - 88x64x35mm/3.4"x2.5"x1.4"(LxWxH). Thickness: 2mm..
  • Widely Applicatio - Fit any all sized bed frames, headboards and foot boards, Bunk Beds, Headboards and other wooden furniture..
  • Easy Installation - Direct installation of bed rail brackets takes only a few minutes. Disassembly for replacement is quick and easy..
Check Stock

ATAIRSOFT Tactical Helmet Headset Adapter for COMTAC Headset Fast Helmet Side Rail

  • ★ Made by high quality nylon plastic material, Connect the Fast Helmet Side Rail and ZTAC COMTAC series headphones firmly. It can be easily installed in the Fast helmet side rail..
  • ★ Package including: 1 pair of Rail Adapter Headset Holder Set, 1 pair of 20mm rails, 1 Installation Fittings. Available in 4 colors: Black / DE / FG / OD green.
  • ★ Only suitable for FAST helmet rails and ZTAC COMTAC series headset..
  • ★ The 2pcs 20mm rails are used to connect flashlight or laser pointer..
Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

  • 【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
  • 【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
  • 【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
  • 【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
  • 【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..
Check Stock

Socell 4 Sets Bed Rail Brackets Heavy Duty No-Mortise Bed Rail Fittings Wooden Bed Frame Connectors with Screws for Headboards Footboards Hold 500 pounds Maximum

  • ✿Dimensions: Bed rail brackets: Angle pieces: 85 x 30 x 27mm/3.34" X 1.18" X 1.06".
  • Flat pieces:96.6 x 28.5 x 10.8mm/ 3.8" X 1.12" X 0.42".
  • ✿Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws..
  • ✿Bed rail fasteners are made of sturdy and heavy-duty colour galvanized rust-resistant steel, thickened steel plates that are more load-bearing, suitable for a variety of sizes of beds or for repairing old bed frames..
  • ✿Application:Be widely used for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders, even other wooden furniture..
  • ✿Package included: 4 x Bed rail bracket.
Check Stock

Socell 4 Sets Bed Rail Brackets Heavy Duty No-Mortise Bed Rail Fittings Wooden Bed Frame Connectors with Screws for Headboards Footboards Hold

  • ✿Dimensions: Bed rail brackets: Angle pieces: 86 x 33 x 26.5mm/3.38"" X 1.3"" X 1.04"".
  • Flat pieces:91 x 31 x 6.5mm/ 3.58"" X 1.22"" X 0.25"".
  • ✿Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws..
  • ✿Bed rail fasteners are made of sturdy and heavy-duty colour galvanized rust-resistant steel, thickened steel plates that are more load-bearing, suitable for a variety of sizes of beds or for repairing old bed frames..
  • ✿Application:Be widely used for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders, even other wooden furniture..
  • ✿Package included: 4 x Bed rail bracket.
Check Stock

Fleece Performance Emissions Compliant CP3 Conversion Kit & Pump FPE-LML-CP3-FF-EO Compatible with 2011-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD 6.6L LML Duramax Diesel

  • Convert your 2011-2016 Duramax feet s fuel system from a CP4 to a CP3 high pressure pump and get performance and peace-of-mind. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Our newest kit includes all of the hardware necessary to replace the troublesome CP4 with a CP3 and requires no tuning changes and maintains all factory emissions controls..
  • CP3 Pump Billet CP3 Engine Block Adaptor High Pressure Fuel Rail Line Low Pressure Fuel Feed Line Return Fuel Hose.
  • CP3 Feed Hose Fuel Rail Nut (3) CP3 Block Adapter Bolts (Flange Head, M8x1.25x35mm).
  • CP3 Pump Fittings 3/8 inch CP3 Pump Fittings 1/2 inch (2) 12mm Sealing Washers.
Check Stock

Trekassy 8ft Horizontal E-Track Tie-Down Rail Kit with 8 Steel O-Ring Anchors and 8 Rope Tie Offs for Truck Bed, Trailers

  • ...nize SOLID STEEL for ultimate weather-resistant, rust- and corrosion-resistance, strong enough for both indoor and outdoor use..
  • EASY TO USE: Simply mount the e track rail on your trailer wall or floor, press the lever on the spring fitting end attachments, then Insert the fittings into the slots of the E Track Rail to create a secure tie down track system for ATV, UTV, car, or motorcycle wheels..
Check Stock

Trekassy 6 Pack 5ft E Track Tie-Down Rails, Horizontal E-Track Rail Kits with 6 Steel O-Ring Anchors for Enclosed Trailers, Trailer Beds, Pickups, Trucks

  • MONEY-SAVING : 6 Pack of 5' horizontal e track rails + 6 Pack of 2" E-track O rings, combo kit much more cheaper than buying separately. Covered by 3 Years Warranty..
  • STRONG and HEAVY DUTY: E-Track Rail: 6,000Lbs Breaking strength + 2,000Lbs Working load. E-Track O-Ring Anchors: 4,500Lbs Breaking strength + 1,500Lbs Working load for each. Safety secure your cargo and loads..
  • UNIVERSAL and FLEXIBLE: The E-Track tie-down rail kits are universal, great for trailers enclosed box trucks, cargo vans, flatbed, RVs, warehouses, garages. Also a great tie-down system for ATV, UTV, and motorcycles..
  • Durable and HIGH QUALITY: Both E-Track Tie-Down Rail and O-Ring Anchors are made out of Galvanize SOLID STEEL for ultimate weather-resistant, rust- and corrosion-resistance, strong enough for both indoor and outdoor use..
  • EASY TO USE: Simply mount the e track rail on your trailer wall or floor, press the lever on the spring fitting end attachments, then Insert the fittings into the slots of the E Track Rail to create a secure tie down track system for ATV, UTV, car, or motorcycle wheels..
Check Stock

Five Oceans FO1586 Rail-Mount Outboard Motor Bracket, Up to 80 lb and 1 inch (25.4mm) Rail Diameter, UV-Stabilized Polypropylene, Stainless Steel Hardware Included

  • This Five Oceans Rail-Mount outboard bracket keeps your small outboard safe and upright on the stern rail (rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods)..
  • It includes two-piece mounting blocks clamp around 1-inch (25.4mm) O.D. T rail and it hold outboards up to 80 HP..
  • Fits both 7/8 inches and 1 inch rails as well as rails using 90 tee fittings. Attachment hardware, four (4) stainless steel fasteners included..
  • Made of UV-stabilized polypropylene to resist the conditions of the marine environment..
  • Can be used as a mounting platform for barbecues, downrigger brackets, fish cleaning tables, etc.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

E-Track Motorcycle Wheel Chock | Upright Hold Bike Tire Wedge for Garages and Trailers - E-Track and Bolt-Down

  • ...W HOW MUCH your bike means to you. And we want to make it easier to enjoy it! A motorcycle wheel chock HELPS KEEP YOUR BIKE SNUG in your trailer with UPRIGHT HOLD. It’s also THE IDEAL ACCESSORY for your garage, allowing motorcycles to STAND SAFELY on their own while you tinker with them..
  • 003e EASY INSTALL E-TRACK FITTINGS! OTHER wheel chocks require bolts, nuts, measuring tape, and sweat. This Secure & Stable Upright Hold IS PORTABLE AND EXCEEDINGLY SIMPLE – just clip the spring fittings and insert them into E-track rail slots – no hardware necessary! (It’s worth mounting E-tracks just for the LIFELONG ASSURANCE you get from these wheel chocks.) YOU CAN ALSO remove the fittings and bolt down to the floor - 3/8” socket wrench and screws required, not included..
  • 003e ADAPT YOUR TRAILER TO ACCOMMODATE YOUR BIKES EASILY without damaging interior walls or ruining your fenders! This WELL-BUILT 1-PIECE Upright Hold E-Track Wheel Chock works perfectly to STABILIZE various kinds of cycles. It’s CONVENIENT AND EASY TO USE AND move around where needed. *NOTE: You’ll still need tie-down straps to secure your motorcycle for transportation on the road.*.
  • 003e THIS HEAVY DUTY POWDER COATED STEEL tire wedge chock rises 6"-11" above the plate with E-....
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock