Reviews Pvc Injection Part

BYS VRO Oil Injection Conversion Fuel Pump Kit for Johnson/Evinrude 5007420 5007422

  • ▶ This VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors. Fits V6 Crossflow and Looper engines but DOES NOT fit 60 degrees applications..
  • ▶ Replace Part Number：for Johnson/Evinrude 5007420,5007422.
  • OMC part # 4-7359； EMP part # 1399-07359. Interchange Part Number: for Volvo 5007420.
  • ▶ Compatibility: 5007420 VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors..
  • ▶ 5007420 VRO Oil Injection Conversion Fuel Pump is specially designed to exact OEM standards manufactured and tested,to help deliver optimum performance in Johnson/Evinrude engines,provides a good engine performance,which gives your machine the new power and torque it really deserves..
  • ▶ Package Includes: 1x VRO Oil Injection Conversion Fuel Pump Kit..
Check Stock

ProTaper Race Line 2.0 Square Handlebar Pads - USA

  • The SX pad features an injection molded foam which offers better impact protection and significantly increases the life span.
  • Also improved is the fit on the cross brace which helps decrease movement during use.
  • High-density, injection molded foam to reduce rider injury.
  • Durable PVC cover with power-wash proof permanent graphics.
  • Velcro fastening and extremely lightweight.
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

DRICORE PRO Concrete Repair Injection Ports 10 Pack | Backup or Replacement Port to Inject Structural Epoxy and Polyurethane Expanding Foam for Repairing & Strengthening Pits Holes Splits Breaks More

  • QUALITY AND QUANTITY: DRICORE PRO Concrete Repair Injection Ports are convenient to have on hand when doing any type of repair work that uses injectable, expanding polyurethane, high-strength liquid epoxy, adhesives, or any injection repair solutions. These can be used as additional ports for our all-in-one kits.
  • MADE FOR THE TASK: Our spare injection ports are made to be used with concrete repair packs that use polyurethane or epoxy resin injection as part of the process to fix or strengthen concrete that is cracked, broken, split, bowing, or damaged.
  • WHO ARE THEY FOR: Our ports are designed to work with our repair and strengthening systems that use an injection step as part of the process. These ports are handy to have so you don’t run out in the middle of a project. Great for contractors and experienced DIY repairmen doing home projects, basement, pool, and garage renovations.
  • COST EFFECTIVE, SIMPLE TO USE: Save both time and money by stocking up on our ports before your crew starts working. Know how big the space is that you need to repair and plan for human error. Keep some on hand for your next project or concrete service call. Perfect for any size of workplace, household, building, or foundation work!.
  • BUY WITH CONFIDENCE: We pride ourselves on ....
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock

Michigan Motorsports Rack Cap Fitment for 1994 thru 1998 Dodge Cummins, Fits all P7100 injection pumps 2500 3500

  • Rack Cap for 1994-1998.5 Dodge Cummins Diesel & Bosch P7100 Pump,.
  • The Billet Rack Cap allows full rack travel of the P7100 injection pump. This Rack Cap is drilled deeper than the stock rack cap to provide more rack travel. By allowing 4mm more travel, the horsepower gain will be impressive!.
  • Fits ‘94-‘98.5 Dodge Cummins and all P7100 injection pumps.
  • Replaces: Bosch part 2095 and Bosch part #2423462000.
  • Made of the highest quality materials available..
Check Stock

Bolt-.25-20x1.25z(180 180024MA;313674MA;

  • Brand new and high quality ABS Injection Molding Triangular Shaped Interview Mic Microphone Station Logo..
  • Square shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Creative Shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Portable and practical Square shaped microphone station logo,large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Suitable for interview, corporate meetings, press conferences, family gatherings singing, KTV, and very light to carry..
Check Stock

FORMUFIT F00145E-UV Elbow PVC Fitting, Furniture Grade, 45 Degree, 1\ Size, Clear

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy clear surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single piece from durable and UV-resistant Furniture Grade PVC.
  • Will not crack, change color or degrade over time like other sub-par PVC fittings.
  • Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
Check Stock

FORMUFIT F0015WC-UV 5-Way Cross PVC Fitting, Furniture Grade, 1\ Size, Clear

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy clear surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single piece from durable and UV-resistant Furniture Grade PVC.
  • Will not crack, change color or degrade over time like other sub-par PVC fittings.
  • Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
Check Stock

FORMUFIT F0015WC-BK-4 5-Way Cross PVC Fitting, Furniture Grade, 1\ Size, Black (Pack of 4)

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy black surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F0125WC-WH-10 5-Way Cross PVC Fitting, Furniture Grade, 1/2\ Size, White (Pack of 10)

  • Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0.840").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F0345WC-WH-8 5-Way Cross PVC Fitting, Furniture Grade, 3/4\ Size, White (Pack of 8)

  • Fits 3/4" Size PVC Pipe, which has an outside diameter of 1-1/16" (1.050").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F1144WT-WH-4 4-Way Tee PVC Fitting, Furniture Grade, 1-1/4\ Size, White (Pack of 4)

  • Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0.840").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock