Reviews Injection Extrusion

3 Pieces Baby Oral Feeding Syringe Baby Feeder Dispenser Syringe Dropper Feeder Infant Feeding Utensils with Nipple Pacifier for Feeding Medicine Water Juice Suitable for Infants Newborns (White)

  • Quality material: the handle is made of safe material PP, without BPA, not easy to break, can be boiled, safe and reliable, silica gel head is made of liquid silica gel, easy to clean.
  • Easy to disassemble and clean: the structure of oral feeding syringe is easy to assemble, disassemble and clean. Recommend to clean by boiling water for 1-2 minutes. Check product condition regularly. Replace if this product shows any signs of damage.
  • Specially designed for the baby: specially designed for the baby to feed medicine, using liquid injection on both sides, to avoid direct injection of liquid into the throat, effective choke prevention. At the same time to avoid the liquid through the baby's taste region and cause aversion to the baby, so that the feeding is relatively simple and easy.
  • Ensure accurate measurement: bottle body with scale, ready to master the amount of medicine, transparent bottle body, imitates the needle extrusion and push, automatic flow.
  • Package includes: contains 3 pieces baby oral feeding syringe, enough for your use, and you can also share it with your friends or family who have babies.
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

Gizmo Dorks 3D Printer Filament 3mm (2.85mm) 200g, 4 Color Sample Pack - Flexible Red, Polycarbonate Blue, Nylon Clear, PETG Green

  • Bundle contains 4 sample spools each containing 200 grams of different 2.85mm diameter 3D printer filament: Flexible TPU Red, Polycarbonate Blue, Nylon Clear, and PETG Green.
  • Flexible TPU red filament has a shore hardness of 95A and can be used to print different flexible parts such as cellphone cases.
  • Polycarbonate blue 3D filament is extremely hard and durable as polycarbonate is used in many applications such as bullet proof glass.
  • Nylon 3D printing filament is a great engineering filament that has great wear resistance that can make specialty printed parts.
  • PETG filament combines all the benefits of PLA with ABS producing printed parts that are both strong and flexible.
Check Stock

10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
  • 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
  • Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check Stock

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

  • Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
  • All-metal Extruder -- Stronger extrusion force with stable performance.
  • metal extruder with high quality aluminum alloy has stronger extrusion force,....
  • Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

Wallpaper Smoothing Tool Kit, Adhesive Wallpaper Install Tool Kit Include 2 Scrapers,Craft Knife with 5 Replacement Blades for Adhesive Contact Paper and Wallpaper Paste Applications

  • [WALLPAPER SMOOTHING TOOL KIT]DURABLE MATERIAL: The scraper is made of durable plastic material and the craft knife is made of alloy steel with 5 alloy steel blades. Very easy to use..
  • [WALLPAPER SMOOTHING TOOL KIT]SIZE: The blue scraper is 5.1inchX 3.14inch, and the red scraper is 7.67inchX 4.3inch.Precision cutting process knife.
  • 5 additional blades can be replaced when the knife becomes dull..
  • [WALLPAPER SMOOTHING TOOL KIT]ERGONOMIC DESIGNS: Blue extrusion tool with black felt design, large size red extrusion tool for human hand engineering design, very time and energy saving, very suitable for novice installers and professionals..
  • [WALLPAPER SMOOTHING TOOL KIT]MULTIPLE USES: The red extrusion tool is perfect for large area applications, and the blue extrusion tool is suitable for applying seams, corners and edges to wallpaper, effectively smoothing wrinkles and bubbles to make the most of your wallpaper. Craft knife With replaceable 5 blade craft cutter, suitable for your different DIY home projects..
  • [WALLPAPER SMOOTHING TOOL KIT]APPLICASION OCCASIONS: Wallpaper Smoothing Tool Kit is ideal for any home project, suitable for a variety of Wallpaper applications, vinyl stickers and glass films to make your project easier..
Check Stock

1set V Type Black AM8 3D Printer Aluminum Extrusion Metal Frame Full Set with Rubber Foot, Nuts Screw Bracket Corner for Anet A8 Upgrade (V type)

  • V Type is a generic 2020 rail and can compatible with Normal 2020 Extrusion hardware and accessories. The only difference is the V Type slot angle which allows for adding V-Wheels.
  • AM8 3d printer aluminum extrusion frame kit- Pre-tapped.
  • Package: please check the product description as the following.
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

HAKZEON 25 Packs 1 Gallon Nursery Trade Pots, Black Plastic Plant Nursery Pots Round Planter Nursery Pot for Plants Flowers, Succulents, Vegetables, Seedling

  • PREMIUM PP MATERIAL - Plastic trade pots is made of new high-quality plastic by adding anti-aging agent under one-time injection molding process, which is anti-extrusion, strong, not easy to break and durable to withstand harsh weather and can be used outdoors for a long time..
  • 25-PACK AND IDEAL SIZE - You will receive a valued package including 25 packs of 1 gallon trade pots with top diameter of 6.7 inches, bottom diameter of 4.7 inches, a depth of 6.9 inches. Large capacity can meet various of your planting needs, and provide enough growing space for your plants to thrive..
  • EXCELLENT DRAINAGE SYSTEM - Nursery trade pots have a beautiful and simple black appearance, with 5 drainage holes on the sides and bottom to provide good drainage and air permeability, which is conducive to the drainage and breathing of the roots of the plants. They are easy to clean and can be reused for multiple times..
  • WIDE RANGE OF USE - 1 gallon trade pots will not deform easily, and the rounded edges will have no burrs. Perfect for beginners, gardening enthusiasts, gardeners or anyone who wants to cultivate seedlings! Widely used in yards, terraces, gardens, porches, greenhouses, and nurseries to cultivate a variety of small and medium-sized plants..
Check Stock

DURAMIC 3D PLA Glow in The Dark Filament 1.75mm Glow Green, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.05 mm, 1kg Spool

  • ...ect, we recommend you to expose your print to full sunlight or UV light for a period of time..
  • CONSISTENT & STABLE PRINTING - Duramic 3D promises no tangling, no popping and no clogging issues due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and consistent printing performance. Recommended Extrusion/Nozzle Temperature 220±10C ..
  • SMOOTH & STABLE PRINTING - Duramic 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and stable printing performance. Recommended Extrusion/Nozzle Temperature 220±10C ..
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. Eco-friendly and odor-free..
Check Stock