Reviews Pvc Injection Mould

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

Geekpure 10 Inch Reverse Osmosis RO Filter Housing -1/4 Port-Fit for 2.5 x10 Filters

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

ProTaper Race Line 2.0 Square Handlebar Pads - USA

  • The SX pad features an injection molded foam which offers better impact protection and significantly increases the life span.
  • Also improved is the fit on the cross brace which helps decrease movement during use.
  • High-density, injection molded foam to reduce rider injury.
  • Durable PVC cover with power-wash proof permanent graphics.
  • Velcro fastening and extremely lightweight.
Check Stock

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock