Reviews Housing Injection Mould

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
  • Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
  • Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....
Check Stock

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

Yoursme Injection Pump Gear Puller Removal Installer Tool & Engine Barring/Rotating Tool for Cummins and Dodge Engines

  • APPLICATION: Injection Pump Gear Puller works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT. Engine Barring/Rotating Tool works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • SUPER MATERIOR: Made from high standard 42CrMo steel with Black Finish, resisting rust and impact, Great Strength and Durability, ensures reliable long-term service..
  • USE INSTRUCTION： Injection Pump Gear Puller--Used to remove the injection pump gear with ease and fast. Engine Barring/Rotating Tool--Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • PACKAGE INCLUDE: 1PC Injection Pump Gear Puller with two heavy duty flange bolts.
  • Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us..
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock

Jack Daniel's Whiskey Logo - Old Number 7 - Single Neon Bar Wall Clock

  • JACK DANIEL’S NEON CLOCK - The Jack Daniel’s Single Neon Clock is the Perfect Addition to Your Bar, Game Room, Arcade, Garage or Anywhere Else You Need to Show Your Love for One of the Great American Whiskeys. Provides the Perfect Atmosphere for Your Entertaining Space..
  • JACK DANIEL'S WHISKEY LOGO - Iconic Jack Daniel’s Logo Adorns the Face of this Head-Turning, Neon Clock with Gun Metal Housing..
  • WHITE NEON - Clock Face is Brilliantly Illuminated with the Crisp, White Light of the Neon Tube Highlighting the Classic Jack Daniel’s Logo..
  • GUNMETAL HOUSING - Clock Features Durable Injection Molded Gunmetal Housing that has a Smooth, Shiny Finish that will Stand Out on Any Wall..
  • POWER ADAPTOR - Power Adaptor Included to Power Neon Tubes. Clock Movement Powered by AA Battery. (Battery Not Included) Dimensions - 14.5" Diameter x 2.5" Deep..
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock

DEPEPE 30 Pcs 40 Pin 2.54mm Pin Headers Male and Female Header Pins PCB Board Headers for Arduino Prototype Shield

  • 620PCS Dupont Connector Kit: Dupont style 2.54mm connector kit consists of a selection of housings as well as male and female crimp pins to make....
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal....
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male....
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low....
  • Applications: Dupont connector serves as electronic connectors for making custom wires for FPV, drone, breadboard, 3D printer, robots, etc..
Check Stock