Reviews Purpose Relay

Automotive Relay Tester 12V Auto Relay Diagnostic Tool Battery Checker Small Relay Tester with Clips

• ...ed LED light is on, it means the tester can start the test. Check the relay before testing. Select the appropriate socket according to the pins, insert the relay into sockets, press the "Test" button, and the tester will automatically detect the pin position of the unknown relay..
• Fitment - Suitable for most general-purpose automotive relays on the market. When testing, it needs to be connected to the car's 11V-15V battery. The car battery must be a 12V battery, and the battery voltage must be between 11V-15V.
• 2. The applicable coil resistance is preferably above 20 ohms..
• Compact - Our automotive Relay tester is small and easy to carry around for on-the-go jobs or for easy storage. Its compact design allows easy use no matter where you are..
• Simple and Quick - With our patented design this relay tester will give you the results you need quickly and easily..

Taidacent Vibration Sensor Delay Module AC 220V Power Supply Vibration Sensitivity Adjustable Vibration Detection Switch for Home Application

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

• Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
• Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
• Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
• This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
• Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

IDEC RR3B-UDC24V MOMENTARY, 10A (Contact), Panel Mount, Power/Signal Relay, 24VDC (Coil), 1500MW (Coil), AC/DC Output, DC Input, 30VDC (Contact), 0.06A (Coil), 3PDT

• Yuco double pole double throw contacts general purpose relay.
• 110/120V ac capacity 30 amp 250vac /28vdc 2no/2nc.

Aeola 2 Pack 13500126 OEM GM 5-Terminal Main Hi Power Multi-Purpose Relay Compatible for D1780C 19116058

• Quality Assured :Brand New Components, TOP quality starter relays, constructed of high-quality material for long lasting durability and reliability, meets or exceeds OEM standard..
• Reference Part Number:13500126,D1780C,19116058.15393413, 19116364.Other Part Number:15-50448, 19115082, 13502678, 15328867.
• Compatibility: Main Hi Power Multi-Purpose Relay, It fits fo GM BUICK CADILLAC CHEVROLET HUMMER OLDSMOBILE PONTIAC GMC SATURN.
• Powerful Function:Commonly used for Excavators and Automotive A/C compressors Fan Motor, starters, headlights, horns, Ignition, Fog Lamp, Headlamp, fans, Rear Window Defroster, Blower Motor, Cargo Light, Driving Light, Fuel Pump / Circuit Opening Relay and other accessories..
• Buy with Confidence:we offer 12-month warranty and 30-day money back guarantee! We are committed to providing our consumers with high quality and cost-effective products, ensuring the true worry-free shopping experience..

DaierTek 12V Fuse and Relay Box 6 Slots Relay Block 6 Slots ATC/ATO Fuse and Relay Block with Relay Universal Waterproof Fuse and Relay Box Kit for Automotive Car Truck Marine Boat

• Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
• ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
• Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
• Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
• What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..

Electronic Specialties 191 Relay Buddy Pro Test Kit

• Kit includes Relay Buddy tester, 5 new relay adapters and blow mold case.
• Relay Buddy is a quick go/no go tester for the most common automotive relays.
• With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays.
• Relay Buddy will fail the relay and light the red LED if any of the test cycle proves unsuccessful during the test session.
• Settable to 4 and 5-pin relay and uses vehicle's 12 volts battery for power.

ATD Tools 5614 Relay Circuit Tester

• Able to test an entire circuit - from battery to component, including the relay With this item the technician can jump a relay.
• do an AC charge from the relay by activating the compressor.
• do compression testing by activating the starter relay and even check turn signals or lights from the front of the car.
• Allows the technician to diagnose the problem without the use of a multimeter.
• The lighted display shows the technician the problem immediately.
• With this item the technician can jump a relay.
• Includes: (1) Tester, (6) popular Relay Leads, and (1) Universal Relay Lead.

Finder 34.51.7.024.0010 SPDT 6A, 24V DC Coil, AgNi Contact, Slim Electromechanical PCB Relay

• Type : General Purpose (Min)iature Relay.

Two Position Low V Actuator w/End Switch

• Output: fan relay, alarm relay and 4-20ma current loop.
• Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
• Mounts on a standard 4” x 4” electrical box.
• 5 a spdt fan relay controls starters of exhaust fans.

SainSmart USB 4 Channel Relay Automation (5V)

• NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
• Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
• Module with overcurrent protection and relay diode freewheel protection..
• NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
• NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.

Automotive Purpose Relays 301-1C-C-R1-U01-12VDC 5 PIN 4Pack

• High Temperature withstand up to 125°C ambient.
• General purpose applications for automotive in power..

MADE IN USA REAL 1/0 AMERICAN gauge Battery Relocation Kit,Top Post 20 FT RED 5 FT BLACK

• Purpose: this voltage sensitive relay is design for two battery systems (SUITABLE for Acid-Lead batteries, NOT SUITABLE for Lithium batteries), allow to having two separate power sources while charging by one alternator, it's all need to charge and isolate two battery systems..
• Primary Battery Protected: cuts in at 13.3 volts and cuts out at 12.8 volts. Ensure your primary battery is always charged and ready to start your engine, the secondary will be charged after the primary battery's volts exceed 13.3 volts..
• Heavy Duty: this voltage sensitive relay is heavy built to suitable for almost anywhere even off-road, which is water resistant, shock resistant, dust proof and withstand unexpected extreme weather environments..
• Compatible: used for DC 12 V two battery systems isolate and charge, universal used for car, vehicle, RV, ATV, UTV and boat, also two battery electrical equipment..
• Easy to use: this VSR comes with 3 battery terminals, wire lugs, mounting plate and 4 bolts (NO CABLE) for install. 100% SATISFACTION: no reason for return or change..