Reviews Battery Relay

Electronic Specialties 191 Relay Buddy Pro Test Kit

  • Kit includes Relay Buddy tester, 5 new relay adapters and blow mold case.
  • Relay Buddy is a quick go/no go tester for the most common automotive relays.
  • With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays.
  • Relay Buddy will fail the relay and light the red LED if any of the test cycle proves unsuccessful during the test session.
  • Settable to 4 and 5-pin relay and uses vehicle's 12 volts battery for power.
Check Stock

ATD Tools 5614 Relay Circuit Tester

  • Able to test an entire circuit - from battery to component, including the relay With this item the technician can jump a relay.
  • do an AC charge from the relay by activating the compressor.
  • do compression testing by activating the starter relay and even check turn signals or lights from the front of the car.
  • Allows the technician to diagnose the problem without the use of a multimeter.
  • The lighted display shows the technician the problem immediately.
  • With this item the technician can jump a relay.
  • Includes: (1) Tester, (6) popular Relay Leads, and (1) Universal Relay Lead.
Check Stock

Painless Performance 30133 Weatherproof PCM Controlled Fan Relay Kit, Ground Activated

  • Inexpensive protection for an electric fan and a vehicle's wire harness.
  • Relay activation by grounding the relay coil can be provided by most Powertrain Control Modules.
  • Provides direct battery power, protects PCM from voltage spikes and prevents the fan from back feeding through the vehicle's wire harness.
  • Kit includes weatherproof: SPST 35-amp relay, 30-amp circuit breaker, relay base with 10' harness, crimp-on terminals and mounting hardware.
Check Stock

Electronic Specialties 190 Relay Buddy Automotive Relay Tester

  • Quick off-the-car relay tester - checks relay coil and switch contacts.
  • Automatic test with good/bad indication - fails bad relays.
  • Settable to 4 and 5 pin relay - tests the 3 most popular automotive relays.
  • Switch contact are loaded to detect excessive resistance.
  • Uses vehicle's 12 Volt battery for power.
Check Stock

2pcs LED Flasher Relay 2 Pin,12V Relay with Harness for Motorcycle LED Flash Turn Signal Control Relays

  • 【High Quality】ZSSElec 12 volt relay is made of durable high-quality materials (ABS plastic, sturdy copper wire, and metal),copper wires can....
  • 【Easy to Install】Just need to connect turn signal flasher relay 2 pins to the battery. No tools are required. (NOTE: if the wiring connectors are....
  • 【Flasher Relay for LED Turn Signal】ZSSElec electronic turn signal flasher relay help control the flash rate of the lights on your motorcycles,....
  • 【Motorcycle Flasher Relays】Automotive replacement flashers compatible for most bike scooter, motorcycle,such as such as Honda, Kawasaki, Suzuki,....
  • 【Packing】2pcs 12V 2pin LED flasher relay to meet your demands..
Check Stock

KTNNKG Remote Battery Disconnect Switch Auto On Off Kill Switch for Car - DC12V, 180A,Silver Contact-Electromagnetic Solenoid Valve Terminal

  • Remote Car Battery Disconnect Switch System - When you leave the car for long time , the battery is still working,kill your car power system with a remote controller now..
  • Handy easy & simple - this Remote Control Electromagnetic Battery Switch Disconnect allows you to move the trigger from under the hood to your hand.
  • Turn on the battery before you start the engine (160 feet remote distance).Do not turn off the battery when your engine is working.
  • Idea for different vehicle - 12V relay match 12V Electromagnetic ,24V relay match 24V Electromagnetic.
  • This remote battery switch is only for battery on / off, it can't start your engine.
Check Stock

70955

  • FEATURES: 12 position terminal block for accessory attachment.
  • 6 40-amp cube style relays (plug-in style).
  • 6 Diodes to prevent LED “field collapse”.
  • Inline 50amp manual resetting circuit breaker.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit.
  • Fuse for LVCO which can be removed to bypass the LVCO.
  • High-temp, abrasion resistant wiring cables.
  • KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.
Check Stock

Wztepeng 500A 12V Mobile Audio Relay Battery Isolator 500Amp 12Volt Relay

  • Battery Isolator:Battery isolators are suitable for applications that need to isolate multiple batteries, such as mobile audio, marine, powered sports, etc. It is used to isolate batteries that power AV, navigation, etc. It allows the second battery to be fully dedicated to the sound system and does not create a voltage drop like common isolators tend to do. The isolator will draw less than 1 amp when your vehicle is powered on..
  • Extends battery life:its a must for daily driver systems,This 500 amp continuous duty relay does not have the voltage drop that a solid state battery isolator has and does a much better job of charging auxiliary batteries through..
  • Feature:Made of high-quality materials, excellent performance and durable.Easy to install and start up immediately..
  • Package Include:1 * 500 Amp 12V Mobile Audio Relay Battery Isolator.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer Half a year warranty, 100% satisfaction guarantee..
Check Stock

MADE IN USA REAL 1/0 AMERICAN gauge Battery Relocation Kit,Top Post 20 FT RED 5 FT BLACK

  • Purpose: this voltage sensitive relay is design for two battery systems (SUITABLE for Acid-Lead batteries, NOT SUITABLE for Lithium batteries), allow to having two separate power sources while charging by one alternator, it's all need to charge and isolate two battery systems..
  • Primary Battery Protected: cuts in at 13.3 volts and cuts out at 12.8 volts. Ensure your primary battery is always charged and ready to start your engine, the secondary will be charged after the primary battery's volts exceed 13.3 volts..
  • Heavy Duty: this voltage sensitive relay is heavy built to suitable for almost anywhere even off-road, which is water resistant, shock resistant, dust proof and withstand unexpected extreme weather environments..
  • Compatible: used for DC 12 V two battery systems isolate and charge, universal used for car, vehicle, RV, ATV, UTV and boat, also two battery electrical equipment..
  • Easy to use: this VSR comes with 3 battery terminals, wire lugs, mounting plate and 4 bolts (NO CABLE) for install. 100% SATISFACTION: no reason for return or change..
Check Stock

Mr. Gasket 6279 Truck Mounted Battery Installation Kit

  • RUGGED DURABILITY -This dual battery isolator kit is all you need to charge a dual battery system. It features a voltage sensitive chip ensuring your primary battery is always ready for your vehicle to run. This dual battery isolator is also built to withstand extreme weather environments, vibration and is water resistant..
  • EASY TO INSTALL - No alternator or ignition connection needed,You don't need any additional components to complete installation as everything is included in the kit, including leads, connectors, screws, zip ties, and more..
  • VOLTAGE SENSITIVE RELAY - The Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
  • FITS A WIDE VARIETY OF VEHICLES - This Dual Battery Isolator Kit with Printed Installation Instruction Manual Gives You the Power for Your Recreation Without Needing to Worry About Getting Home After.12V, 140A, 13.3V cut-in voltage, 12.8V Cut-out Voltage, Suitable for 12V 4WD, Marine, Truck, Caravan & Camping Applications..
Check Stock

Taylor Cable 48020 Single Trunk Mount Battery Relocator Kit

  • Easy to Install: No alternator or ignition connection needed,You don't need any additional components to complete installation as everything is included in the kit, including leads, connectors, screws, zip ties, and more..
  • Voltage Sensitive Relay: DEWINNER Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
  • Fits a Wide Variety of Vehicles: Like Having Two Separate Power Sources,The Dual Battery Isolator Kit Enables Your Accessories to Run From a Separate Battery While the engine is not running on your vehicle While keeping your Main Battery Charged and Your Vehicle Always Ready to Go and Start When You Want It. Suitable for 12V 4WD, marine, truck, caravan & camping applications.
  • What You Get: 140 Amp Voltage Display Battery Isolator.
  • 2×positive brass marine battery terminals.
  • 1× negative brass marine battery terminal.
  • 3×copper crimp lugs &2× Red heat shrink.
Check Stock

EVTSCAN Latest DPA51CM44 3-Phase Monitoring Relay, Current/Voltage Monitoring Relay Phase Sequence Protector for Three-Phase System, Without Neutral, Phase Loss, 208-480VAC

  • ✈ PRODUCT NAME---Voltage Monitoring Relay.
  • Protection function: over voltage, under voltage.
  • Contact capacity: 6A 250VAC (resistivity).
  • ✈ REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
  • ✈ MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
  • ✈ 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
  • ✈ TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check Stock

Aube by Honeywell TH140-28-01-B/U Hydronic Heating 7-Day Programmable Thermostat

  • Compatible with hydronic floor heating and central heating.
  • also compatible with electric heat applications using a relay (see accessories).
  • 5-Ampere (resistive) 24-Volt, 120-Volt, 240-Volt R, W.
  • Millivolt compatible, SPDT dry contact relay output.
  • Remote input enables change of temperature modes by phone (Telephone controller required – Aube by Honeywell CT240).
  • Low battery indicator gives 60-day warning to replace battery (2 ‘AA’ batteries required).
  • Dimensions (height by width by depth): 4.9-Inch by 3.8-Inch by 1-Inch.
Check Stock