Reviews Ptfe Thread Sealant

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Poly-Temp 36536 Anti-Seize Ceramic Filled PTFE Thread Seal Tape, 600\ Length x 1/2\ Width x 3.5 Mil Thickness, Cream

  • The Combination of PTFE along with Copper Powders provide the ultimate protection from oxidative chemicals and protects against rust and corrosion, Ideal for all tapper thread connections.
  • PTFE's high lubricity makes for easy assembly, only three wraps needed for most applications, excellent pipe thread sealant up to 550F.
  • Copper filler can withstand temperatures up to 1800F for anti-seize applications, pressures up to 10,000psi.
  • Never dries out, unlimited shelf life, Extremely versatile lubricant and sealant..
Check Stock

Loctite 2087067 567 Thread Sealant 50 mL Tube, White

  • MULTI-PURPOSE WHITE PTFE THREAD SEALANT: Uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections.
  • SOFT SET WITH NO CURE TIME: Forms leak-free joints that can be tested and put into service immediately with no cure time required, and it holds tight against expansion, vibration, and contraction.
  • HEAVY DUTY: Withstands temperatures from -200 degrees Fahrenheit to 500 degrees Fahrenheit, and it has a maximum working hydraulic pressure of 12,000 PSI.
  • COMPATIBILITY: Can be used on all metal, PVC, ABS, and CPVC plastic lines carrying water, steam, caustics, and dilute acids, and it is suitable for use with all liquids and gases except for oxygen.
  • EASY TO APPLY: Brushable and non-separating for easy application, and it will not run or drip from joints.
Check Stock

generic 30 Pcs Tape Water Proof Tape Floor Tape Thread Tape Window Repair Strip DIY Cloth Tape Floor Sealing Strip Ptfe Pipe Sealant Tape Thread Seal Tape Sealant Tapes Pipeline

  • Weather Resistant Duct Tape: Plumbing tape also has a good perfermance towards moisture and acids, they will not easily..
  • Tape: Thread seal tapes are made of PTFE which has a good sealing capabiity and can resistant ..
  • Pipe Thread Tape: Thread seal tapes are made of PTFE which has a good sealing capabiity and can resistant ..
  • Heavy Duty Duct Tape: As it is not sticky, so it is also easy fro you to remove them..
  • Gas Tape: Thread sealant tape is suitable for most kinds of water pipes, creating airtight seals between threaded pipes and fittings..
Check Stock

INTERTOOL Spray Foam Gun, Insulation Expanding Sealant Applicator, PTFE Non-Stick Coated Basket and Tip PT-0604

  • [Reusable Foam Dispenser]: Heavy duty stainless steel foam dispensing gun ideal for applying polyurethane insulation and sealant foam. Thoroughly clean when canister is removed for optimal performance.
  • [Less Mess and Wasted Foam]: Includes easy turn flow control knob for adjustable and precise bead size. Dispenses only the amount you need and reduces foam waste and overspray. Plus 4 tip attachments.
  • [Easy Clean Material]: PTFE non-stick coated basket connector and barrel tip makes it easy to clean off foam preventing foam curation and clogging.
  • [Twist-on Can Compatible]: Gun intended for use with twist-on foam sealant and cleaner cans, such as Great Stuff Pro 24oz screw-on canisters. Simply align the canister thread with the gun basket thread and screw on until secured. NOT compatible with straw or tube tipped canisters.
  • [INTERTOOL has YOU Covered]: We are always available to quickly resolve any issue and answer to your needs. Our community is our #1 priority.
Check Stock

Rectorseal 23431 Pint Brush Top T Plus 2 Pipe Thread Sealant

  • Non-hardening thread sealant containing PTFE plus synthetic fibers.
  • These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.
Check Stock

Replacement for Professional 213-4514 Engine Coolant Temperature Sensor 12-Month Warranty

  • Compatible with all GM LS series engines.
  • Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE，and 1 steel braided hose ..
  • Can be installed on the front or rear of the cylinder heads.
  • not compatible with FAST 102 intake manifolds.
Check Stock

VCELINK Teflon PTFE Thread Seal Industrial Tape Plumbing for Shower Head, Pipe Sealing, Water Leaks, Stainless Steel, 520\ Length, 1/2\ Width, White (8 Rolls)

  • VCELINK PTFE Water Plumbers Thread Tape used to connect threaded pipes. A good solution for enhancing the tightness of pipes and stopping leaks..
  • Widely Applicable: Tape Plumbing is designed for home and threaded pipe applications. Working for both air and water, suitable for most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • Good Quality: Gas Teflon Tapes has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • Easy to use: Simply wrap the PTFE tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • Package and after-sales: 8 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

DUPPCOS 6 Rolls Teflon Tape 1/2Inch(W) 520Inches(L), Plumbers Tape, Plumbing Tape, Sealant Tape, PTFE Tape, Sealing Tape, Perfect for Shower Head Water Pipe

  • [ High Quality ] DUPPCOS thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Rated for temperatures ranging from -212° to 512°F..
  • [ Wide Application ] Plumbers thread tape are used in iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABC, fiberglass and more..
  • [ Value Pack ] Each premium bag contains 6 rolls of plumbing tape, each roll measures 1/2inch wide and 520inches long. It's enough for you to use for a long time, you don't have to buy teflon tape again and again..
  • [ Great For DIY ] Wrap the tape around the threaded male end of the pipe or connector and screw it in. Keeps sealant tape dry and safe in a sturdy plastic case..
  • [ Long -Term Storage ] DUPPCOS Teflon tape are the best aging life of all plastics. Leftover sealant tape for plumber can be stored for many years. Don't worry about losing expiration..
Check Stock

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant

  • Non-hardening thread sealant containing PTFE plus synthetic fibers.
  • These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.
  • Its low coefficient of friction allows tighter joint makeup with lower torque.
  • It also breaks out easily without galling, seizing, or damaging threads.
  • It is excellent for service where immediate pressurization is necessary.
Check Stock

EVIL ENERGY 6AN Male Flare to 3/8' NPT Pipe Fitting Adapter Aluminum Straight Black

  • Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Male Flare to 1/4\ NPT Pipe Fitting Adapter Aluminum Straight Black 2Pcs

  • Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Rectorseal 23710 1-3/4-Ounce Tube T Plus  Pipe Thread Sealant , White

  • HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
  • PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
  • GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
  • EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
  • WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..
Check Stock