Reviews Thread Sealant For Ss Threads

TOMEX Thread Seal Tapes,PTFE Pipe Sealant Tape,Teflon Thread Tape 1/2x520 Inch, Industrial Thread Sealants for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe(10 Rolls,White)

  • Package Includes: These tapes measuring 1/2 x 520 inches in size, totally 10 rolls pipe sealant tape, enough quantity for your different needs and also can be applied for a long time..
  • Good Quality: TOMEX Thread sealant tape is made of teflon with good density,4 times heavier than standard tapes,is suitable for most kinds of soft water pipes, Teflon tapes will not harden or crack anytime.
  • They have the good characteristics of corrosion resistance, anti-aging,helps prevent leaks on pipes and plumbing..
  • Widely apply: thread sealant tape is suitable for most kinds of soft water pipes, it is designed for home and piping applications.Working for both air and water , plastic and metal pipe fittings.good for gas, drinking water pipes and garden hose faucets ..
  • Simple & Efficient to Use: simply wrap the tape around the threaded male end of the pipe or connector and screw it in.
  • Less stickiness on the fingers and easy to remove.
  • Standard Grade: Standard quality for home, commercial and industrial piping applications. Fit all types of pipe threads for hundreds of applications..
Check Stock

10 Pack 10-32 x 1 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 10-32 threads, Head diameter: .500 inches, Head height: .250 inches, Shoulder diameter: .375 inches, Shoulder height: .1875 inches, Thread length: 1.00 inches..
Check Stock

10 Pack 8-32 x 1/2 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 8-32 threads, Head diameter.
  • .4375 inches, Head height: .250 inches, Shoulder diameter: .3125 inches, Shoulder height: .125 inches, Thread length: .500 inches..
Check Stock

10 Pack 8-32 x 3/4 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 8-32 threads, Head diameter: .4375 inches, Head height: .250 inches, Shoulder diameter: .3125 inches, Shoulder height: .125 inches, Thread length: .750 inches..
Check Stock

10 Pack 1/4-20 x 3/4 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 1/4-20 threads, Head diameter: .750 inches, Head height: .3125 inches, Shoulder diameter: .500 inches, Shoulder height: .1875 inches, Thread length: .750 inches..
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant

  • Non-hardening thread sealant containing PTFE plus synthetic fibers.
  • These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.
  • Its low coefficient of friction allows tighter joint makeup with lower torque.
  • It also breaks out easily without galling, seizing, or damaging threads.
  • It is excellent for service where immediate pressurization is necessary.
Check Stock

EVIL ENERGY 6AN Male Flare to 3/8' NPT Pipe Fitting Adapter Aluminum Straight Black

  • Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Male Flare to 1/4\ NPT Pipe Fitting Adapter Aluminum Straight Black 2Pcs

  • Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Road King Truck Parts Gladhand Handle Grips – Durable Poly Glad Hand Handle Grip Set Red & Blue

  • One pair of Road King Truck Parts durable poly gladhand grips. Economical alternative to more expensive aluminum handles..
  • Provides added leverage for coupling & uncoupling gladhands. Color coded red & blue handles for ease of identification..
  • Installs between gladhand and air brake lines..
  • 1/2” threaded MPT and FPT on grip extension handles..
  • Male threads contain pre-applied thread sealant..
Check Stock

Craftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)

  • Starter Kit: includes essential accessories needed to equip a new air compressor.
  • Applications: Attachments included for inflating tires, sport balls and air mattresses.
  • connecting compressor to air hoses and air tools.
  • Recoil hose connects to all included accessories with included quick-connect fittings.
  • Specifications: standard 1/4-inch NPT male or female threads.
  • Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
  • Also it has quarter-turn, and the double-seal system allows flow to go in either direction, easy to operate and practical to use.
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock