Reviews Ptfe Shaft Seal

Garlock 29507-4106 ISO-Gard Goulds 3196STX Bearing Isolator, Bi-Directional, 0.875\ x 1.250\ x 0.625\ Outboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4125 ISO-Gard Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Azzota PTFE Stirring Shaft with Foldable Paddles for stirrers, 14\ 350mm

  • PTFE Teflon Stirring Shaft with Foldable Paddles.
  • Shaft diameter: 8mm, Shaft length: 14"/350mm.
  • Paddles maximum diameter: 80mm (fully extended).
  • Polytetrafluoroethylene (PTFE) Anti-corrosion.
Check Stock

Sterling Seal & Supply (STCC) White Virgin Teflon 7530 Sheet, 1/32\ Thick, 6\ x 6\ Square (QTY 1)

  • Sterling Seal & Supply 7530 is the most chemically inert of all plastics which complies with USFDA legislation for safe use with food and is one of the most versatile plastics known to man.
  • Sterling Seal & Supply 7530 has excellent thermal insulation and electrical reliability. This is true at high radio frequencies, making it suitable for use as an insulator in cables and connector assemblies.
  • Sterling Seal & Supply 7530 has a wide thermal range with a maximum temperature limit of 500 Degrees F and minimum of 328 Degrees F. PTFE will insulate to 500 volts per mil.
  • Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
  • PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications.
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock

Four Seasons 26777 Cap & Valve Air Conditioning System Seal Kit

  • 【High-quality material】Air Conditioning Compressor Shaft Seal Kit,It is made of high-quality rubber and metal, which has the advantages of anti-aging, oil resistance, corrosion resistance, etc., and has a long duration of use and is not easy to damage..
  • 【Direct Replacement】A/C Compressor Shaft Seal,This seal kit allows you to directly repair the original seals on some vehicle applications, and provides accessory assistance for the daily maintenance and updates of the vehicle, with high adaptability..
  • 【Standard Specifications】A/C Compressor Shaft Seal Kit,Manufactured in accordance with standard specifications, strictly in accordance with the factory quality control, and its performance is stable after multiple tests after installation..
  • 【Easy installation】Automotive A/C Compressor Oil Seal,The accessory installation method is simple, disassemble the original worn-out parts and re-install it, no complicated operation is required, and it is easy to use..
Check Stock

(400MM) / 15.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

  • PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
  • It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
  • Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
  • PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
  • Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock

(450MM) / 17.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

  • PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
  • It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
  • Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
  • PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
  • Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

  • 1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
  • They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..
Check Stock

Sterling Seal & Supply, SSS165LA.187x1-V Expanded Flexible Graphite Filled PTFE Braided Packing 3/16\ Cross Section, 1' Cut Length 165LA-V.187\

  • Graphite filled ptfe (commonly called gfo) fiber with excellent thermal conductivity and chemical resistance.
  • Graphite filled ptfe fiber is excellent with thermal conductivity and will not harden.
  • Applications include corrosives, chemicals, solvents, water, steam, gases, air, ammonia, oils, liquor, paper stock, and condensate. Marine shaft packing that is ABS approved and used by the US Navy..
  • Shaft speeds to 4400 FPM, and withstands pressure up to 300 psi/20 Bar. pH 0-14 (Not for chlorine service).
Check Stock

Lisle 58430 Shaft Type Seal Puller

  • Removes Cam Shaft and Crank Shaft Seals Without Damage to the Shaft.
  • Engage the adjustable hook behind the seal.
  • Brace the push rod against the engine head and push the handle to remove the seal.
  • Removes the seal without damage to the shaft.
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock