Reviews Ptfe Or Ptfe Rod

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

(400MM) / 15.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

  • PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
  • It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
  • Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
  • PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
  • Stiring rods - coated in white PTFE,anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock

(450MM) / 17.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

  • PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
  • It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
  • Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
  • PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
  • Stiring rods - coated in white PTFE,anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock

DONLAB EBT2 1000ml Glass Separatory Funnel Set, PTFE Stopcock with Steel Support Stand, Clamp and PP Holder

  • 1000ml glass separatory funnel with PTFE stopcork.
  • Stamping steel stand: 8"x5” | 21cmx12cm.
  • Rod height: 20" | 50cm, Road dia 3/8" | 10mm.
Check Stock

Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB - USAlab

  • ● This platinum plate electrode is widely used in electrochemical study. It is an important accessary for electrochemical work-station and three-electrode cell. Besides, the platinum electrode is also used as insoluble anode in electrolysis process..
  • ● The electrode is coated with PTFE (polytetrafluoroethylene), and the size of PTFE is 80mm × φ6.4mm. The terminal is gold-plated copper rod (15mm × φ2mm)..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

  • 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
  • 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
  • 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
  • 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
  • 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock