Reviews Ptfe Ring

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

• PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
• In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
• Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
• It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
• Please check if this size is what you need..

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

• PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
• In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
• Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
• It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
• Please check if this size is what you need..

Wilmad-LabGlass LG-9444-106 10mm PTFE Stirrer Bearing, Standard Taper 34/45

• Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter, and top cap. See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

10 Pcs 30mm/1.18 Inch Magnetic Stirrer Mixer Stir Bar, Laboratory Bar, Stir Plate Bar

• These stir bars have a pivot ring around the center. They are designed to maintain the optimum position in vessels with curved or uneven bottoms. The ring helps to reduce vibrations and wear, and reduce the effects of friction from contact with the vessel..
• Mixer stir bar is made of PTFE and quality magnetic steel.Not easy to demagnetize, will work longer than others..
• The laboratory bar is chemical resistant and corrosion resistant.
• The maximum temperature is 250 degrees centigrade and the minimum temperature is -196 degrees centigrade..
• Stirrer bar is widely applied in scientific research, universities, laboratories in the industrial and agricultural sectors as well as family usage..
• Package includes 10pcs PTFE magnetic stir bar, dimensions: Φ8 × 30mm/1.18 inch..

Simsii Syringe Filter Hydrophobic PTFE Membrane Disc Diameter 25 mm Micron Pore Size 0.22 um Pack of 100

• Housing: Polypropylene(PP) housing with light red ring.
• Hydrophobic Syringe Filters, PTFE Membrane, 25mm.

Body Candy Baby on Board Pregnant Belly Ring

• Adjustable length 2 inch pregnancy belly button rings.
• To size simply cut the belly ring shaft to your desired length.
• twist balls onto end of this pregnancy belly button ring.

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

• Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
• The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
• Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
• One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
• The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

• ...: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
• Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
• Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..

Magnetic Stir Bar - Cross Style - 37.5mm x 36mm x 12mm

Magnetic Stir Bar - Gear Style - 40.75mm x 5.5mm

United Scientific Supply Desiccator, Vacuum, Clear Base, 12\ - USS

• The PP stopcock has a self-lubricating PTFE plug.
• The transparent pc bottom provides increased viewing clarity.
• An internal groove on the flange holds the silicon rubber O-ring.
• Package Dimensions: 28.7 L x 35.1H x35.1W x(centimeters).

Magnetic Stir Bar Combo Pack, Large Sizes - 30mm, 45mm, 60mm & 70mm

• Chemical resistant PTFE material. Octogon shape with pivot ring..

Superior Pump 92181 1HP Stainless Steel and Cast Iron Tethered Float Switch Sump Pump, 1 HP, Silver

• Premium Double PTFE Diaphragms: Our air-operated double diaphragm pump adopts PTFE diaphragms, durable, corrosion-proof, and long-lasting. Max. Temperature: 150 ℉/66 ℃.
• Sturdy & Leak-proof Construction: The diaphragm pump housing is made of aluminum alloy material, bolted against leakage, sturdy, and corrosion-proof for long-time use..
• Excellent Air-operated Performance: Inlet/Outlet Port Size: 1 inch.
• Air Inlet Size: FNPT 1/2 inch. A high-quality glyd ring, the double-acting sealing, strengthens air performance..
• Unique & Professional Designs: Our double diaphragm pump features an externally available air distribution system. The modular air valve is stainless. This low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes downtime..
• Wide Applications: This diaphragm pump can handle various fluids, such as waste oil, alcohol, hydraulic fluid, gasoline, diesel, detergent, drink, and so on. It is widely used in many industries, such as petroleum, metallurgy, mining, coating, printing, water treatment, and automobile..